LUX SL180, Strip Light, CRGBW, 3200mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Oszczędź 13%

Garmin

010-04392-00

LUX SL180, pasek świetlny, CRGBW, 3200 mm

La bande lumineuse Garmin LUX SL180 de 3200 mm offre un éclairage marin CRGBW à spectre complet, avec une capacité de blanc tunable de 2700 K à 6500 K. Certifiée IP68 et résistante aux UV, elle est conçue pour une installation au-dessus de la ligne de flottaison et peut être ajustée tous les 100 mm grâce à un kit d'étanchéité inclus. Ce produit fait partie de la gamme Lumishore LUX et nécessite un module de pilotage Lumishore LUX Strip Light Driver pour fonctionner. Elle est livrée avec un adhésif et des clips à visser pour sa fixation.

Prix publicBénéficier du tarif pro

224,14€

224,14€ ~~259,99€~~

Cena brutto Dostawa obliczana w momencie płatności.

Dostępny

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ produktu	Bande lumineuse
Napięcie pracy	24 V
Typowe zużycie energii	16 W
Kolor światła	CRGBW (blanc froid, rouge, vert, bleu, blanc chaud)
Stopień ochrony IP	IP68
Kompatybilny z ściemniaczem	Oui
Długość taśmy	3.2
Gęstość diod LED na metr	60.0
Tylna strona samoprzylepna	Oui
Construction Type	Encapsulée, Potée
Diffuser Type	Sans points
Installation Location Type	Intérieur, Extérieur, Au-dessus de la ligne de flottaison, Zones humides
Typ źródła światła	LED
Typ montażu	Adhésif 3M, Fixations mécaniques, Clips de montage
Zużycie energii na metr	5
Zakres napięcia zasilania	23 - 25
Required Driver Module	Lumishore LUX Strip Light Driver
Submersion Resistance	Temporaire
Odporność na UV	Oui

Description détaillée

Pasek świetlny Garmin LUX SL180 CRGBW o długości 3200 mm to wszechstronne rozwiązanie oświetleniowe do montażu powyżej linii zanurzenia. Wyposażony jest w diody LED CRGBW (biały zimny, czerwony, zielony, niebieski, biały ciepły), zapewniające pełen zakres kolorów oraz regulację temperatury barwowej białego światła od 2700 K do 6500 K. Pozwala to na tworzenie spersonalizowanych nastrojów świetlnych na jachtach.

Konstrukcja i specyfikacja techniczna

Dzięki 60 diodom LED CRGBW na metr, LUX SL180 oferuje mocne i równomierne oświetlenie. Długość 3200 mm jest fabrycznie przygotowana i może być precyzyjnie skrócona co 100 mm dzięki funkcji "cut-to-length", ułatwiając montaż w różnych miejscach, takich jak pawęż, pod meblami lub za panelami. Produkt dostarczany jest z zestawem uszczelniającym do cięcia. Konstrukcja zalana żywicą oraz dyfuzor bez punktów świetlnych zapewniają ochronę IP68 przed pyłem i chwilowym zanurzeniem, choć nie jest przeznaczony do stałego zanurzenia.

Integracja i sterowanie

Pasek świetlny LUX SL180 wymaga modułu sterującego Lumishore LUX Strip Light Driver do działania (napięcie wejściowe 23–25 V) i nie może być podłączany do produktów innych producentów, co unieważniłoby gwarancję. Do zaawansowanego sterowania, np. przez kompatybilny ekran wielofunkcyjny (MFD), ekran Lumishore, urządzenie inteligentne lub łączniki chwilowe, konieczny jest moduł sterujący EOS-LUX. Przy średnim poborze mocy 8,7 W/m jest ściemnialny i wykonany z materiałów odpornych na UV oraz słoną mgiełkę, co zapewnia trwałość w warunkach morskich.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation pour bande lumineuse LUX SL90 & SL180 IP68

Avis de l'expert

Pol CONIN

Kierownik ds. cyfryzacji

« Garmin LUX SL180 marine lighting: CRGBW versatility and integration »

The Garmin LUX SL180 LED light strip is a versatile ambient lighting option for recreational and semi-professional boats. Its CRGBW capability allows for advanced customization of onboard lighting, from warm relaxing white to intense night blue. The "cut-to-length" feature with a 100 mm pitch is a major advantage for integrators, providing unparalleled installation flexibility in confined or complex spaces, such as coamings or cockpit lockers. It is critical to note that this cutting flexibility must be performed using the supplied sealing kit to maintain the IP68 rating of the strip.

For optimal integration, the LUX SL180 must be paired with the Lumishore LUX Strip Light Driver control module, and if control via MFD or smartphone is desired, the EOS-LUX command center becomes essential. This dependency on the Lumishore ecosystem ensures compatibility and full functionality of CRGBW and dimming features, but requires adequate system planning. UV and salt spray resistance make this strip suitable for above-waterline exterior installations. However, it is not designed for prolonged submersion.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SL180, pasek świetlny, CRGBW, 3200 mm

224,14€

224,14€ ~~259,99€~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8410 – ekran traceur 10" z mapą świata

Ref : 010-02091-00

2.237,30€

2.237,30€ ~~2.939,00€~~

Garmin

GPSMAP® 8416xsv – kombinowany GPS-sondaż 16"

Ref : 010-02093-02

5.253,08€

5.253,08€ ~~6.829,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the total length of the Garmin LUX SL180 LED light strip?

The Garmin LUX SL180 light strip has a prefabricated length of 3200 mm.

What lighting colors are available with the LUX SL180 LED strip?

This LED strip integrates CRGBW LEDs, meaning it can produce cool white, red, green, blue, and warm white. It offers a full spectrum of colors.

Can I adjust the length of the Garmin LUX SL180 light strip?

Yes, the LUX SL180 LED strip has a "cut-to-length" function allowing precise adjustment every 100 mm. A sealing kit is included for cuts.

What is the IP rating of this LED strip and is it waterproof?

The Garmin LUX SL180 light bar has an IP68 protection rating. This means it is protected against dust and temporary immersion. It is designed to be installed in wet areas but is not intended for permanent submersion in water.

Which module is required to control the Garmin LUX SL180 LED light strip?

The LUX SL180 light strip requires the use of a Lumishore LUX Strip Light Driver control module for operation. It must not be connected to third-party products.

What is the power per meter of the LUX SL180 LED light strip?

The Garmin LUX SL180 LED light strip has a power output of 5 watts per meter.

Can the LUX SL180 LED light strip be installed underwater?

No, although it is fully sealed and can be installed in wet areas with an IP68 rating, the LUX SL180 LED strip is not designed for permanent submersion in water.

How is the Garmin LUX SL180 light bar mounted?

The LED strip comes with a 3M adhesive backing for easy installation. For outdoor installations, wet areas, or tight radii, it is recommended to use additional mechanical fasteners, such as mounting clips, every 25 to 30 cm.

What is the required input voltage for this LED strip?

The Garmin LUX SL180 LED strip requires an input voltage of 23 to 25V. This voltage is supplied by the Lumishore LUX Strip Light Driver control module.

What is the minimum bend radius for the LUX SL180 LED light strip?

The LED strip has a minimum bending radius of 50 mm along the vertical axis only. Do not bend it along the horizontal axis or twist it.

How many CRGBW LEDs per meter are on this LED strip?

The Garmin LUX SL180 light strip is equipped with 60 CRGBW LEDs per meter, providing powerful and uniform lighting.

Is the LED strip UV-resistant?

Yes, the LED strip is made from UV-resistant material. However, it must not be installed in areas exposed to direct strong sunlight.

Can I connect the LUX SL180 LED strip to a lighting control system from another brand?

No, the LUX SL180 light strip is designed to operate only with Lumishore LUX Strip Light Driver control modules. Connecting to third-party products or drivers will void the warranty.

What is the color temperature range of the tunable white?

The tunable white of the Garmin LUX SL180 LED strip ranges from 2700 K (warm white) to 6500 K (cool white), allowing for various lighting moods.

What precautions should be taken when installing the LED light strip?

Ensure the boat's power supply is disconnected or isolated.Do not bend the strip along the horizontal axis or twist it.Do not apply pressure on the LEDs, only on the edges of the strip.Unroll it carefully from the reel and prevent it from twisting or bending.For lengths over 1 meter, it is recommended to have two people for installation.

What is the warranty duration for the Garmin LUX SL180 LED light bar?

Lumishore Ltd guarantees its lighting systems, including the LUX SL180 light strip, against manufacturing defects for a period of three years from the original purchase date.

What can void the warranty of the LUX SL180 LED strip?

The warranty may be voided in case of misuse, abuse, incorrect installation, negligence, unauthorized repair or modification, or unapproved installations. Use with third-party drivers or failure to comply with installation, maintenance, and usage guidelines also voids the warranty.

Where can the LUX SL180 LED strip be installed on a boat?

The LED light strip is designed for installation above the waterline. It can be integrated into various spaces such as coamings, under furniture, or behind panels to create custom lighting ambiances.

Do I need to disconnect the boat's power supply before installing the LED strip?

Yes, it is imperative to always ensure that the vessel's power source and battery are disconnected or isolated before proceeding with the installation.