LUX SNL180, superjasny neonowy pasek LED, 700 mm

The Garmin LUX SNL180 LED light strip is a flexible and ultra-bright lighting solution designed for marine applications. It provides full-spectrum CRGBW lighting (cool white, red, green, blue, warm white) with adjustable white color temperature, ideal for creating various lighting moods aboard.

The LUX SNL180 LED light strip is supplied in pre-cut lengths of 700 mm.

Yes, the LUX SNL180 LED strip is designed for indoor and outdoor installation above the waterline. It is fully sealed and can be installed in wet areas but is not designed for permanent submersion in water.

Yes, the LUX SNL180 LED light strip is factory-sealed to meet IP67 standards, making it dust-tight and protected against temporary immersion. It is important not to cut the strip to maintain this integrity.

The LUX SNL180 provides full-spectrum CRGBW lighting, meaning it can produce cool white, red, green, blue, and warm white. The white color temperature is also adjustable from 2700K to 6500K.

Thanks to its 180 LEDs per meter and integrated diffusion layer, the LUX SNL180 provides uniform light without visible hotspots, offering an advantage over standard LED strips.

The LUX SNL180 LED light strip has a power consumption of 5 watts per meter.

Yes, the LUX SNL180 LED light strip is made from UV-resistant material. However, it should not be installed in areas with direct exposure to strong sunlight.

The LED strip is installed using the supplied stainless steel clips. The clips are screwed into place, then the LED strip is simply pushed into the clips until a 'click' confirms it is securely fastened. It is recommended to use multiple clips around tight curves.

No, it is essential not to cut the LUX SNL180 light strip. It is supplied in factory-sealed prefabricated lengths to ensure compliance with the IP67 standard. Cutting it would void this integrity and the warranty.

The light strip has a minimum bending radius of 120 mm. It must be bent laterally only; do not twist or bend it along the vertical axis.

Yes, it is imperative to always ensure that the vessel's power source and battery are disconnected or isolated before proceeding with the installation.

No, the light strip must not be twisted or bent on the vertical axis. It is designed for lateral bending only, with a minimum bend radius of 120 mm.

The LUX SNL180 LED strip is designed for exclusive use with Lumishore LUX Neon Flex Strip Light Driver modules. It must not be connected to any other third-party lighting control products or drivers.

No, the LUX SNL180 LED strip must be connected only to Lumishore LUX Neon Flex Strip Light Driver modules. Using third-party lighting control products or drivers is not supported and will void the warranty.

The LUX SNL180 LED strip requires an input voltage range of 23 to 25V. It must be used only with Lumishore LUX Strip Light Driver modules.

Lumishore Ltd guarantees its lighting systems, including the LUX SNL180 light strip, against manufacturing defects for a period of three years from the original purchase date.

The warranty may be void in case of misuse, abuse, incorrect installation, negligence, unauthorized repair or modification, installation by unqualified personnel, or non-compliance with installation and usage guidelines. Use with third-party drivers not from Lumishore will also void the warranty.

The electrical and mechanical installation of the LED strip must be carried out by a qualified professional to ensure safety and compliance with warranty conditions.

It is recommended to use two people to install LED strip lengths over one meter: one person to install and another to hold and carefully unroll the LED strip.