Adapter sondy MotorGuide® do silnika elektrycznego, 4-pinowy

This adapter is designed to establish a reliable connection between Garmin sounder/GPS combos and the transducers integrated into MotorGuide electric trolling motors. It allows your Garmin device to directly receive sonar data from the motor's transducer, optimizing the display and accuracy of underwater information.

The adapter is compatible with a selection of Garmin chartplotters and depth sounders equipped with a 4-pin transducer port. This includes the following series:

ECHOMAP™ Plus: 42cv, 43cv, 44cv, 45cv, 62cv, 63cv, 64cv, 65cv
ECHOMAP™ UHD 6x: 62cv, 63cv, 64cv, 65cv
STRIKER™: STRIKER™ 4, STRIKER™ Plus 4, STRIKER™ Vivid 4cv, 5cv, 7cv, 7sv, 9sv
echo™ and echoMAP™ Chirp 4x/5x series

This adapter is specifically designed to work with the integrated transducers of MotorGuide electric trolling motors. It supports various MotorGuide motor series equipped with this integrated transducer technology.

The length of this adapter's cable is approximately 1.8 meters (about 6 feet), allowing for direct and flexible electrical integration.

No, this adapter is specifically designed with a 4-pin configuration. It is intended for Garmin devices and MotorGuide transducers that use this type of connector.

The adapter is designed for direct electrical integration. While correct installation requires following the instructions provided with your Garmin and MotorGuide equipment, the connection itself is generally straightforward, linking the engine transducer to the Garmin device via the 4-pin port.

You need this adapter because the connectors on MotorGuide integrated motor transducers and those on Garmin sounder/GPS combos are not directly compatible. This adapter acts as an interface to ensure correct electrical connection and sonar data transfer.

This adapter transmits sonar data from the integrated transducer of your MotorGuide engine to your Garmin fishfinder/GPS display. This includes the information required to show the seabed and underwater structures.

The adapter is compatible with the ECHOMAP™ UHD 6x series (models 62cv, 63cv, 64cv, 65cv) and the STRIKER™ Vivid 9sv, as well as other Garmin models listed with a 4-pin transducer port. ECHOMAP UHD 9x series devices are not specifically listed as compatible with this 4-pin adapter.

The package contains the MotorGuide® (4-pin) Garmin transducer adapter (reference 010-11979-00) itself, ready for connection.

No, this adapter is specifically designed to establish a reliable connection between Garmin fishfinder/GPS combos and the transducers integrated into MotorGuide electric trolling motors. It is not compatible with fishfinders from other brands.

No, this adapter is specifically designed to work with the built-in transducers of MotorGuide electric trolling motors. It is not intended for external or non-integrated transducers.

Using this adapter allows your Garmin device to receive sonar data directly from the integrated transducer of your MotorGuide engine. This optimizes the display and accuracy of underwater information without requiring the installation of a separate Garmin transducer on the engine.

Like all marine accessories of this type, the adapter is designed to withstand marine environmental conditions. Although it is not specified as "waterproof" in the strictest sense, it is manufactured to operate reliably in damp and salty environments.

No, the adapter is a passive accessory that facilitates the connection and data transmission between the MotorGuide engine transducer and the Garmin display. It does not require a separate power supply; it draws power and transmits data via the 4-pin connection.

No, this adapter is specifically designed for Garmin devices with a 4-pin transducer port. It is not compatible with 8-pin or 12-pin ports. Using an incorrect adapter could damage the equipment.

The "cv" in Garmin model names such as ECHOMAP™ Plus 42cv or ECHOMAP™ UHD 62cv indicates that the device is equipped with ClearVü technology. This sonar technology provides near-photographic images of what lies beneath your boat.

The "sv" in Garmin model names such as STRIKER™ Vivid 7sv or 9sv indicates that the device is equipped with SideVü and ClearVü technologies. SideVü provides a detailed side view of structures and fish, while ClearVü delivers a near-photographic image beneath the boat.

Extending transducer or adapter cables is generally not recommended, as it can lead to signal loss or interference, affecting the quality of sonar data. It is advised to use the provided cable length (1.8 meters) or consult Garmin's specifications for approved extension solutions if necessary.

The product reference (SKU) for this adapter is 010-11979-00. This is also Garmin's supplier reference.