Przedłużacz mikrofonu ręcznego, 10 m

No, this extension cable is a proprietary Garmin accessory. It is designed with a specific 12-pin connector and an optimized electrical configuration for the Garmin marine VHF radios mentioned. It is not compatible with VHF radios from other brands.

Yes, this extension cable is fully compatible with Garmin GHS 11 and GHS 11i handhelds. It extends the range of these handhelds for increased flexibility in onboard positioning.

This Garmin handheld microphone extension cable is equipped with a 12-pin connector. This type of connector ensures a reliable and secure connection with compatible Garmin VHF radios and handsets.

No, this extension cable is not compatible with Garmin VHF 100 or VHF 300 radios. It is specifically designed for models VHF 210, VHF 210i, VHF 215, VHF 215i, as well as GHS 11 and GHS 11i handhelds.

This Garmin handheld microphone extension cable is 10 meters long. This length provides significant flexibility for positioning your microphone or handset away from the main radio.

An extension cable for a handheld microphone is used to increase the distance between your marine VHF radio and its handheld microphone or handset. This is particularly useful when the radio is installed in a compartment away from the helm, or to allow the microphone to be used from different locations on the boat.

Yes, as a Garmin accessory designed for marine equipment, this cable is made with materials resistant to the marine environment. It is designed to withstand exposure to moisture, salt, and typical temperature variations at sea, ensuring its durability.

The box contains the 10-metre extension cable for the Garmin handheld microphone (reference 010-12523-03) itself. Mounting or fixing accessories are generally not included with cables alone unless specifically stated otherwise by the manufacturer.

The manufacturer's reference for this extension cable is 010-12523-03. This is also the product SKU.

Yes, the cable is designed to be sufficiently flexible to facilitate routing and installation in the confined spaces of a boat. Its flexibility allows for easier installation while ensuring good durability.

Garmin extension cables are generally designed with internal shielding to minimize electromagnetic interference (EMI) and radio frequency interference (RFI), ensuring clear transmission of audio signals and commands between the microphone and the VHF radio.

Yes, this is a genuine Garmin handheld microphone extension cable, bearing the official reference 010-12523-03. It is manufactured by Garmin to ensure compatibility and optimal performance with their marine equipment.

Installing this cable involves connecting it between the compatible Garmin VHF radio and the handheld microphone or handset. Simply plug the 12-pin connector of the cable into the designated port on the radio and the other end into the microphone/handset. It is recommended to power off the radio before making or breaking any connections.

No, connecting this extension cable typically does not require specific tools. The connectors are designed to be plugged and unplugged manually. However, for clean and secure cable routing throughout the boat, cable management tools (cable ties, grommets, etc.) may be useful.

Cutting this extension cable is not recommended. Communication cables like this one are designed with specific shielding and wire configurations that, once cut, can compromise signal integrity and water resistance. Using the standard 10-meter length is best practice.

To route the cable, it is advisable to run it through existing conduits or designated marine cabling cable trays. Avoid routing it near heat sources, high-voltage power cables, or pinch points. Use non-conductive cable ties to secure it firmly and prevent snagging or damage.

Connecting multiple microphone extension cables in series is generally not recommended. This can result in signal degradation, power loss, and potential interference. It is best to use a single cable of the appropriate length to maintain communication quality.

The handheld microphone must be mounted in a location easily accessible from the helm or any other area where radio communication is required. Ensure the cable does not obstruct movement and is protected from the elements and physical damage. A microphone bracket is typically provided with the radio or handset for secure storage.

Garmin accessories such as this extension cable are typically covered by a limited one-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use conditions.

This 10 m extension cable is designed for Garmin VHF installations compatible with remote microphones, including the VHF 210/210i/215/215i series and GHS 11/11i handsets when the station configuration requires it.