ECLIPSE SL100, Strip Light, Blue, 1m - Garmin image 1

ECLIPSE SL100, Strip Light, Blue, 1m - Garmin image 2

ECLIPSE SL100, Strip Light, Blue, 1m - Garmin image 3

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Oszczędź 10%

Garmin

010-04477-00

ECLIPSE SL100, niebieska taśma świetlna, 1 m

La bande lumineuse Lumishore ECLIPSE SL100 bleue de 1 mètre (désormais partie de Garmin) est conçue pour l'éclairage décoratif et indirect sur les navires 12V. Avec 60 LEDs/m, elle est étanche IP68, résistante aux UV et offre une consommation maximale de 0.5A (6W/m) à 12V. Ce modèle monochrome se distingue des versions RGB de la gamme ECLIPSE par sa simplicité d'installation. Inclus : bande lumineuse, adhésif 3M, clips de fixation (fournis ou disponibles en option), silicone de scellement pour les coupes.

Prix publicBénéficier du tarif pro

31,44€

31,44€ ~~34,99€~~

Cena brutto Dostawa obliczana w momencie płatności.

Dostępny

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ produktu	Bande lumineuse
Napięcie pracy	10-15 VDC
Typowe zużycie energii	5 W/m
Kolor światła	Bleu
Stopień ochrony IP	IP68
Długość taśmy	1.0
Gęstość diod LED na metr	60.0
Tylna strona samoprzylepna	Oui
Connection Cable Length	30
Control Method	Interrupteur marche/arrêt, Centre de commande ECLIPSE
Current Consumption Per Meter	0.41
Środowisko montażowe	Intérieur, Extérieur, Zones humides
Minimalny promień gięcia	50
Number Of Wires	2
Strip Thickness	5.2
Strip Width	12.0
Kompatybilność napięciowa systemu	12V DC
Odporność na UV	Oui

Description détaillée

Przeznaczona do oświetlenia nastrojowego i dekoracyjnego na jednostkach pływających, niebieska taśma świetlna Garmin ECLIPSE SL100 o długości 1 metra (numer katalogowy 010-04477-00) montowana jest dyskretnie w przestrzeniach wewnętrznych i zewnętrznych. Model ten należy do serii ECLIPSE, która obejmuje także taśmy o długościach 2,5 i 5 metrów oraz w innych kolorach: białym, niebiesko-białym oraz RGB. Podczas gdy wersje RGB wymagają centralki sterującej ECLIPSE do zaawansowanej obsługi, wersja monochromatyczna w kolorze niebieskim, taka jak SL100, ułatwia instalację, zapewniając stałe i ukierunkowane oświetlenie.

Parametry techniczne i instalacja

Taśma SL100 wyposażona jest w 60 diod LED na metr, zapewniając stałe, niebieskie światło. Zasilana jest napięciem 10–15 V DC, zoptymalizowanym do instalacji 12V typowych dla łodzi. Typowe zużycie wynosi około 5 watów na metr, przy poborze prądu 0,41 A przy 12V. Taśma jest całkowicie zalana żywicą i zalana, co zapewnia jej klasę szczelności IP68, odporność na kurz i wodę, umożliwiając montaż w miejscach wilgotnych, z wyłączeniem zanurzenia ciągłego. Materiał odporny na promieniowanie UV gwarantuje trwałość w warunkach morskich, choć należy unikać bezpośredniego i długotrwałego nasłonecznienia.

Elastyczność i integracja

Taśma o wymiarach 10,8 mm x 5,2 mm jest elastyczna w pionie z minimalnym promieniem gięcia 50 mm, ale nie powinna być zginana w poziomie ani skręcana. Instalacja ułatwiona jest dzięki samoprzylepnej taśmie 3M oraz możliwości stosowania klipsów montażowych (dołączonych) co 250–300 mm, szczególnie zalecanych przy instalacjach zewnętrznych lub w miejscach narażonych na naprężenia. SL100 można przycinać do wymaganej długości, przy czym każdy odcięty koniec należy zabezpieczyć silikonem dostarczonym w zestawie, aby zachować szczelność. Sterowanie może odbywać się za pomocą prostego włącznika/wyłącznika lub, w przypadku bardziej zaawansowanej integracji, poprzez kompatybilny ekran wielofunkcyjny lub urządzenie inteligentne współpracujące z centralką sterującą ECLIPSE (nie wymagane w przypadku modelu monochromatycznego z bezpośrednim zasilaniem).

Documentations

Type	Nom
	Notice d'installation - Guide d'installation de la bande lumineuse Garmin Eclipse SL100 (EN)

Avis de l'expert

« Technical analysis of the Lumishore ECLIPSE SL100 light strip (by Garmin) »

The Garmin ECLIPSE SL100 1-meter blue LED light bar is a supplementary lighting solution for marine environments. Its single-color design simplifies electrical integration, requiring only a two-wire connection to a 12V switch, unlike RGB versions in the same range that need an ECLIPSE control hub to manage colors. This makes it a relevant choice for applications where constant ambient lighting is desired without the complexity of a color management system.

Its robustness is ensured by IP68 encapsulation and UV-resistant materials, making it suitable for indoor or outdoor installations, provided it is not permanently submerged. Typical installation scenarios include lighting side decks, integration under cockpit furniture, or behind ceiling panels, where its vertical flexibility allows it to follow the boat's contours. The ability to cut it to the desired length offers great adaptability, but it is essential to carefully seal the cut ends with the provided silicone to maintain waterproof integrity and warranty validity. Using mounting clips in addition to adhesive is recommended for enhanced durability, especially in vibrating or exposed areas.

This model is ideal for 12V boat owners looking to enhance the aesthetics and functionality of their lighting with a reliable and relatively simple-to-install solution, without the constraints of a complex installation. It is less suited for primary lighting needs or applications requiring intensity or color variations without additional control modules.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SL100, niebieska taśma świetlna, 1 m

31,44€

31,44€ ~~34,99€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the color of this light strip?

The Garmin ECLIPSE SL100 light bar (part number 010-04477-00) emits blue light.

What is the length of this light strip?

This Garmin ECLIPSE SL100 light bar version has a length of 1 meter.

What is the electrical consumption of this LED strip?

The typical power consumption of the ECLIPSE SL100 LED strip is about 5 watts per meter. It has a typical current draw of 0.41 amperes at 12 volts.

What is the IP rating of the ECLIPSE SL100 light strip?

The ECLIPSE SL100 light strip is fully encapsulated and potted, giving it an IP68 rating. This means it is dustproof and waterproof, allowing installation in damp areas, but it is not designed for permanent submersion in water.

Is this LED strip UV-resistant?

Yes, the ECLIPSE SL100 LED strip is made from UV-resistant material. However, prolonged direct sun exposure should be avoided to ensure durability.

How many LEDs are there per meter on the ECLIPSE SL100 strip?

The Garmin ECLIPSE SL100 LED strip is equipped with 60 LEDs per meter, providing constant blue light.

What is the Garmin ECLIPSE SL100 light bar used for?

The Garmin ECLIPSE SL100 LED light bar is designed for ambient and decorative lighting on vessels. It integrates discreetly into interior and exterior spaces, providing a constant blue light.

Can the ECLIPSE SL100 LED strip be installed indoors and outdoors?

Yes, the ECLIPSE SL100 light strip is fully sealed and can be installed both indoors and outdoors. It is suitable for damp areas but is not designed for permanent immersion in water.

What precautions should be taken before installing the LED strip?

Before installation, it is crucial to:

Always ensure the vessel's power source and battery are disconnected or isolated.Have the electrical and mechanical installation performed by a qualified professional.Choose a location where the strip will not be exposed to prolonged direct sunlight, despite its UV resistance.Unwind the LED strip carefully from the spool to avoid twisting or dropping it.

How to install the ECLIPSE SL100 LED strip?

The LED strip is fitted with a 3M adhesive layer for easy mounting. For installation, clean the mounting surface thoroughly with isopropyl alcohol (IPA), remove the 3M adhesive backing, and press the strip firmly into place, applying pressure only to the edges (never on the LEDs). Allow the adhesive to cure for 24 hours before turning on the light.

Can the ECLIPSE SL100 light strip be cut to the desired length?

Yes, the light strip can be cut to the desired length. It is imperative to cut only at the marked cutting points. After cutting, the end must be prepared and sealed with silicone adhesive (provided) to maintain waterproofing.

How to seal the end of an ECLIPSE SL100 LED strip after cutting it?

To seal the cut end, follow these steps:

At the end to be sealed, peel back 20mm of the adhesive backing and lightly score the adhesive 10mm from the end using a sharp blade. Remove the adhesive tape from the score line to expose the silicone underneath. Fill the end cap halfway with the silicone adhesive (provided). Attach the end cap, wipe off any excess adhesive. Allow to cure for 24 hours before handling. Do not use chemical cleaners.

What is the maximum bending radius allowed for this LED light strip?

The ECLIPSE SL100 light strip has a minimum bend radius of 50 mm (1.968 inches). It must only be bent along the vertical axis.

Can the LED strip be bent in any direction?

No, the ECLIPSE SL100 LED strip must only be bent along the vertical axis. It is critical not to bend it along the horizontal axis or twist it, as this could damage it and compromise its operation.

Is additional mounting required for outdoor installation?

Yes, for outdoor installations, wet areas, or tight bends, it is recommended to use mechanical fasteners (mounting clips) in addition to the adhesive layer. These clips should be spaced every 250 to 300 mm (9.842 to 11.811 inches) and/or on each side of a bend.

How many people are recommended for the installation of long LED light strips?

For installing LED light strips longer than 1 meter, it is always recommended to use two people: one to install and another to hold and unroll the strip carefully to avoid bending, twisting, or creasing it.

What is the required supply voltage for the ECLIPSE SL100 LED strip?

The ECLIPSE SL100 LED light bar is designed to operate with boats equipped with a 12-volt electrical system. It can function within a voltage range of 10 to 15 VDC (direct current). It must not be connected to voltages outside this range or directly to an alternating current (AC) supply.

Is this LED strip compatible with 24V electrical systems on boats?

No, the ECLIPSE SL100 LED strip is designed to operate exclusively with 12V DC boat electrical systems. It must not be connected to voltages outside the 10 to 15 VDC range, including 24V systems.

Can the ECLIPSE SL100 LED light strip be connected to an ECLIPSE control unit?

Yes, the blue monochrome version of the ECLIPSE SL100 light strip can be connected to an ECLIPSE control center. This allows centralized lighting management, although for monochrome versions, a simple connection to a switch is also possible.

Does the ECLIPSE SL100 (monochrome) light bar require an ECLIPSE control unit?

No, the monochrome blue version of the ECLIPSE SL100 light strip does not require an ECLIPSE control center to operate. It can be installed and controlled via a simple connection to a switch. ECLIPSE control centers are mandatory only for RGB versions of the ECLIPSE range.