Panel sterowniczy ICC do przetwornicy-ładowarki

The Mastervolt Remote ICC (Inverter Charger Control) control panel is designed for remote operation and monitoring of Mass Combi systems. It provides precise, real-time tracking of the inverter/charger's status.

This panel provides a dedicated user interface for onboard power management. It displays essential information via its indicators, showing the status of the charger and inverter, currents, voltages, and charge cycle statuses. It also includes an on/off switch.

In "Charge" mode, the display shows the DC charge current as a percentage of the maximum and the charge cycle status (bulk, absorption, float), crucial details for battery health.

If the "Failure" LED lights up red, this indicates a fault has been detected in the system. The specific causes of faults are explained in the Mass Combi manual.

The AC input LED lights up green if AC power is available and meets specifications. It flashes rapidly in case of insufficient incoming AC quality, which is vital to prevent damage to sensitive equipment.

The charger's LED (Charger) lights up green when the Mass Combi is operating in charger mode. It turns red if an error is detected.

Yes, a 6-meter control cable is supplied with the Remote ICC control panel.

No, the On/Off switch on the ICC remote control panel does not fully shut down the Mass Combi. The no-load current remains below 5 mA, keeping the data buses connected to the control panels active.

When the Mass Combi is turned off via the ICC remote control panel, the no-load current draw is less than 5 mA.

To know the exact dimensions required for installation, it is essential to refer to the diagrams in Figure 1 provided in the product user manual.

The Remote ICC control panel complies with European Union Directive 2014/30/EU (EMC Directive) and Directive 2011/65/EU (RoHS Directive).

The harmonised standards applied for the Remote ICC panel include:

EN 61000-6-3: 2007 + A1:2011 + AC:2012 (Emission for residential, commercial and light industrial environments) EN 61000-6-2: 2005 + AC:2005 (Immunity for industrial environments)

The Remote ICC control panel is specifically designed for operating and remotely controlling Mastervolt Mass Combi systems.

Before any installation, it is crucial to power off the Mass Combi, disconnect the external AC power supply, and remove the DC fuses to ensure your safety and the equipment's integrity.

It is imperative that any modifications to your electrical system be carried out only by qualified electricians, and that connections and safety features comply with local regulations.

The communication cable must be installed between the REMOTE input of the Mass Combi and the ICC panel. To do this, it is necessary to open the connection compartment of the Mass Combi.

Yes, installing the Remote ICC control panel requires cutting an opening in the mounting surface, following the dimension diagrams provided in the product manual.

The standard warranty period for the Remote ICC control display is two years. Any installation not compliant with the user manual's directives, instructions, and specifications may void this warranty.