Przetwornik sinusoidalny Mastervolt Mass Sine Ultra 24/4000

It delivers a continuous power output of 4000 W, even at an ambient temperature up to 40 °C, with no loss of efficiency.

Peak power reaches 7000 W. This energy reserve is ideal for starting high-power, energy-intensive equipment smoothly, such as air conditioning compressors or large electric motors.

It generates pure sine wave AC power (True Sine Wave) at 230 V with a total harmonic distortion (THD) below 1%. This ensures perfectly stable and safe power supply for your most sensitive electronic equipment.

The device has the following physical specifications:

Height: 472 mmWidth: 318 mmDepth: 178 mmWeight: 15 kg

It is designed to operate with a 24 V DC battery bank. Its input voltage range is programmable and spans from 19 V to 32 V to accommodate different battery types.

Yes, thanks to its modular architecture and dedicated Sync ports, you can connect up to 10 units in parallel to multiply the overall output power of your electrical system.

Yes, the Mass Sine Ultra allows for complex three-phase configuration. You can integrate up to 9 units (3x3 configuration) to meet the needs of large-scale marine installations.

For optimal operation, it is recommended to use a battery bank with a capacity greater than 350 Ah.

To ensure the safety and efficiency of the system, it is recommended to use DC cables with a minimum cross-section of 70 mm², which must be paired with an inline 250 A fuse.

No, its standby power consumption is well controlled to preserve your batteries:

16 W in normal operation7 W in power-saving mode4 W in remote shutdown mode

Yes, it is fully compatible. It features two MasterBus ports, enabling monitoring, configuration, and precise control of your installation via a MasterView display or a PC running the MasterAdjust software.

It has an IP23 protection rating. This means it is protected against finger contact and water spray at less than 60 degrees from the vertical. It is designed exclusively for indoor installation.

It operates optimally between -25 °C and 60 °C. Note that a preventive power reduction (derating) is automatically applied when the ambient temperature exceeds 40 °C to protect internal components.

The Mass Sine Ultra 24/4000 meets the strictest marine and mobile sector safety standards. It notably holds the international CE, ABYC and E-mark certifications.

Yes, it is essential to leave at least 150 mm of free space under the converter. This allows for easier cable routing, access to the DIP switches, and proper ventilation to prevent hot air buildup.

Yes, the output frequency is selectable between 50 Hz and 60 Hz (±0.005%). This setting can be adjusted easily via the MasterBus network.

Yes, the front panel is equipped with a practical display panel featuring:

LED indicators showing power draw (in 20% increments)Battery charge statusAC output indicatorMain power On/Off switch

The unit includes full automatic protection. It is protected against short circuits, overloads (indicated by a red LED on the front panel) and excessive internal temperatures. In case of a critical fault, the inverter goes into safety mode to prevent any damage.

The Mass Sine Ultra 24/4000 offers excellent energy efficiency with a maximum efficiency of 92% or higher. This helps preserve the autonomy of your battery bank and minimizes energy losses as heat.

Yes, for a secure installation fully compliant with local electrical regulations, it is mandatory to connect the neutral conductor (N) of the AC output to the ground (PE / GND) of your vessel or vehicle.