Płyta adaptacyjna AXIOM 9 PRO do wycięcia E90W

This adapter plate, part number A80530, is specifically designed for installing a Raymarine Axiom 9 Pro multifunction display (MFD).

It is designed to be installed in an existing cutout that was originally intended for a Raymarine E90W display.

No, the A80530 mounting plate is specifically sized for integrating the Raymarine Axiom 9 Pro display. It is not compatible with other screen sizes in the Axiom range.

No, this adapter plate is specifically designed to modernize a Raymarine E90W display installation to an Axiom 9 Pro. It is not compatible with the older E-Series Classic or C-Series displays.

No, this plate is designed for a direct transition from Raymarine E90W to Axiom 9 Pro. It is not intended to fit cutouts of screens from other brands.

The A80530 adapter plate is designed to fit the Raymarine Axiom 9 Pro display in general, without distinction of specific versions mentioned in the provided information.

The main advantage is to simplify upgrading your navigation system. It allows installing an Axiom 9 Pro display in an existing cutout for an E90W, thus avoiding costly and complex modifications to the dashboard or navigation console.

The overall dimensions of the A80530 mounting plate are 316.4 mm in width and 196.5 mm in height.

The internal cutout, designed to accommodate the Axiom 9 Pro display, measures 282.4 mm in width and 160.0 mm in height.

Yes, this panel is specifically designed for flush-mount installation of the Axiom 9 Pro display, ensuring an aesthetic finish integrated into the dashboard.

Yes, the A80530 adapter plate is an official Raymarine accessory, designed to integrate perfectly with their equipment.

No, the A80530 reference corresponds only to the mounting bracket. The Raymarine Axiom 9 Pro display must be purchased separately.

No, one of the main advantages of this plate is that it is designed to avoid costly and complex modifications to the dashboard by using the existing cutout of the Raymarine E90W.

The mounting holes are precisely aligned to match the specifications of the E90W and Axiom 9 Pro displays, ensuring secure installation and seamless integration. It uses the existing cutout.

No, a full re-cut is not necessary. The A80530 panel is specifically designed to fit into the existing cutout of the E90W display, making the upgrade straightforward.

The A80530 adapter plate provides adequate coverage for the E90W’s original cutout and allows flush mounting of the Axiom 9 Pro, ensuring a clean and aesthetic finish at the helm.

Yes, by avoiding the need for additional cutting or carpentry work, the mounting plate helps maintain the structural integrity of the existing dashboard panel.

Yes, the mounting points are precisely aligned and pre-drilled on the plate to match the specifications of the E90W and Axiom 9 Pro displays, ensuring secure installation.

The panel is designed for secure integration. The final watertightness of the assembly will depend on the correct installation of the Axiom 9 Pro display itself with its own gaskets and adherence to the manufacturer's mounting instructions.