Przełącznik sieciowy Raynet RNS5 Gigabit

The Raymarine Raynet RNS5 Gigabit network switch is a critical component designed for integrating marine navigation and communication systems. It enables the connection of multiple RayNet or SeaTalk HS compatible devices, ensuring high-speed data transfer within your vessel's embedded Ethernet network.

The Gigabit capacity of the RNS5 is crucial for modern marine applications requiring rapid data exchange. It ensures smooth information flow between devices, preventing bottlenecks that could slow down the display or update of critical data from, for example, Quantum radars, RealVision 3D sonar modules, or IP cameras.

The RNS5 switch allows you to connect various Raymarine-compatible devices that require high bandwidth. This includes multifunction displays (MFD) such as Axiom, Evolution autopilot systems, Quantum radars, RealVision 3D sonar modules, IP cameras, as well as other sensors and systems compatible with RayNet or SeaTalk HS.

Yes, the RNS5 is designed to be robust and reliable in demanding marine environments. Its design complies with strict marine standards, such as the European Directive 2013/53/EU (RCD) and standard EN ISO 8846:2017 for ignition protection, as well as standard IEC 60945:2002 for maritime navigation and radiocommunication equipment.

The Raymarine RNS5 network switch complies with the following standards:

European Directive 2013/53/EU.EN ISO 8846:2017 standard for ignition protection.IEC 60945:2002 (EN60945:2002) standard for maritime navigation and radiocommunication equipment.These certifications ensure its reliability and safety for use at sea.

The RNS5 switch is equipped with LED diagnostics that allow you to check its operational status. In case of a problem, these indicators provide valuable information for troubleshooting. Details on interpreting the LEDs are available in the installation manual.

For maintenance of the RNS5 switch, routine equipment checks are recommended. For cleaning, follow the specific instructions provided by Raymarine in the product manual. Note that this product contains no user-serviceable components; any service or repair must be performed by Raymarine authorized dealers.

The RNS5 switch is compatible with RayNet cables and RJ45 cables (also known as SeaTalk HS). This dual compatibility provides flexibility for integration into existing Raymarine installations or new network setups.

Yes, the RNS5 switch integrates naturally into Raymarine network architectures and is fully compatible with Axiom series MFDs, enabling seamless interconnection for data and sensor sharing.

Absolutely. The RNS5 switch is designed to support high-bandwidth devices such as Quantum radars and RealVision 3D sonar modules. Its Gigabit capacity ensures fast and efficient data transmission required by these advanced systems.

Yes, the RNS5 switch can support IP cameras. Its Gigabit performance is essential to handle the high data flow generated by the cameras, ensuring smooth and real-time viewing on your Raymarine network.

While Raymarine does not guarantee compatibility with products manufactured by other entities, the RNS5 installation manual includes an appendix on 'Ethernet Networking (IPv4) of Raymarine devices with third-party products'. This suggests that integration is possible, but it is recommended to consult this section for specific guidelines.

Yes, the RNS5 installation manual mentions the possibility of using 'multiple switches' in an extended system. This allows building more complex networks and extending connectivity for a larger number of devices on board.

Before starting the installation of the RNS5 switch, it is essential to disconnect the vessel's electrical power supply. Never connect or disconnect the equipment while power is on unless specifically instructed to do so in the installation document.

Yes, before powering up the RNS5 switch, it MUST be properly grounded in accordance with Raymarine’s installation instructions. Correct grounding is essential for the device’s safety and proper operation.

When installing the RNS5 switch, it is critical to ensure that the power source is adequately protected. This must be done using a fuse or a thermal circuit breaker of the appropriate rating, as specified in the installation instructions for 12 V or 24 V systems.

Yes, the installation manual provides general guidelines on location requirements, including warnings and precautions. It also mentions ignition protection, EMC (Electromagnetic Compatibility) installation guidelines, and a safe distance from the compass to avoid interference.

The RNS5 installation manual includes a section detailing the tools required for mounting the unit. It is recommended to consult this section to ensure you have everything needed before starting the installation.

For optimal installation, the manual provides general advice on wiring, covering cable types and lengths, cable routing and bend radius, strain relief, circuit isolation, cable shielding, use of suppression ferrites, and cable connection methods.

Yes, the RNS5 switch is designed to be compatible with 12 V and 24 V power systems. Specific instructions for extending the power cable for these two system types are provided in the installation manual.