Sonda brązowa montowana na wprost wiązka stożkowa HIGH CHIRP kąt 0° CPT-S, kabel 10 m

This transducer uses HIGH CHIRP cone-beam technology. CHIRP (Compressed High-Intensity Radiated Pulse) sweeps a wide frequency band, delivering significantly improved target discrimination and image clarity compared to traditional fixed-frequency transducers. The cone beam provides optimal coverage beneath the boat, helping to more precisely distinguish fish from underwater structures.

This transducer is made of bronze for its robustness and durability, particularly suited to saline marine environments. Bronze offers excellent resistance to corrosion and wear, making it a preferred choice for through-hull installations requiring long-term reliability.

The through-hull transducer with a 0° angle is specifically designed for hulls with little or no deadrise (keel angle) at the installation point. This ensures optimal orientation of the beam beneath the boat, allowing accurate and efficient reading of the seabed.

No, it is not recommended to cut the depth sounder cable. Cutting the cable significantly reduces the fishfinder's performance. Additionally, this would void the product warranty and invalidate the European CE mark. The cable must be replaced if it is damaged, as it cannot be repaired.

To maintain your depth sounder’s performance and prevent the buildup of marine growth, it is recommended to apply a thin coat of water-based antifouling paint. This paint should be reapplied every 6 months or at the start of each sailing season. For cleaning, use a soft cloth and mild household detergent. In cases of heavy fouling, a non-abrasive cleaning sponge may be used, taking care not to scratch the face of the transducer. Never use harsh solvents such as acetone or ketone-based paints, nor spray paints, as they can damage the transducer.

This transducer is designed to be compatible with Raymarine fishfinder modules and multifunction displays that support CHIRP technology from the CPT-S series. It requires connection to a compatible Raymarine fishfinder module to operate correctly.

Raymarine recommends certified installation performed by an authorized installer. Such installation allows for improved warranty benefits on the product. It is advised to contact your Raymarine dealer for further details on specific conditions.

No, it is essential to test and use the transducer only in water. Operating the transducer out of water may cause overheating and damage the device.