Sonda echosondy temperatury DT800-0°

The Raymarine DT800-0° transducer is a through-hull intelligent transducer designed to measure water depth and temperature. It features digital signal processing to convert raw data into a format compatible with NMEA 2000, transmitting it directly to your onboard instrumentation.

The DT800-0° transducer provides accurate real-time depth data beneath the hull and water temperature. This information is essential for navigation and understanding the marine environment.

An intelligent transducer, such as the DT800-0°, integrates digital signal processing directly within its housing. This means it converts analog data into a digital format (NMEA 2000) before sending it to the network, thereby minimizing noise and interference and eliminating the need for an external fishfinder module.

It is particularly suited to vessels with shallow draft and hulls with a deadrise angle of 0°, where a flush-mounted installation is preferred. It is suitable for recreational and cruising boats requiring reliable depth and temperature data.

Unlike analog transducers that require an external fishfinder module to process the signal, the DT800-0° is a standalone smart transducer. It integrates digital signal processing, converting data directly to NMEA 2000, which simplifies installation and reduces interference.

The DT800-0° transducer is designed for through-hull installation on hulls with a deadrise angle of 0°. The "0°" in its name indicates it is optimized for this specific hull angle, ensuring the transducer beam is directed vertically toward the bottom.

To install the DT800-0° through-hull transducer, a 51 mm (2 inch) hole must be drilled in your boat's hull.

Installing the DT800-0° transducer requires drilling the hull and connecting to the NMEA 2000 network. While an experienced sailor may perform the installation, it is recommended to carefully follow the manufacturer’s instructions and, if in doubt, consult a professional to ensure a correct and watertight installation.

Yes, the Raymarine DT800-0° transducer comes with an integrated cable for direct connection to your boat's NMEA 2000 network.

Yes, the DT800-0° transducer is fully compatible with Raymarine Axiom and Element multifunction displays, as well as other Raymarine instruments that support the NMEA 2000 protocol.

Yes, as an NMEA 2000 transducer, the DT800-0° is interoperable with systems from other brands (such as Garmin or B&G) that also support the NMEA 2000 protocol. It will transmit depth and temperature data via this standardized network.

No, the DT800-0° transducer is a smart transducer that includes its own signal processing. It does not require an external sounder module and connects directly to the NMEA 2000 network.

The DT800-0° transducer uses a standard NMEA 2000 connector (typically Micro-C type) to connect easily to your existing network or a new NMEA 2000 network.

The DT800-0° is an alternative to passive transducers like the P79 or P319 models. Unlike these, which require an external fishfinder module, the DT800-0° is a standalone sensor with integrated digital processing, providing a simpler solution for depth and temperature data via NMEA 2000.

The DT800-0° transducer is designed for NMEA 2000 networks. It is not directly compatible with older SeaTalk (SeaTalk1) or SeaTalkHS systems without using specific interfaces or converters to adapt the data to the NMEA 2000 protocol.

A through-hull installation, like that of the DT800-0°, generally provides more accurate and reliable readings because the transducer is permanently submerged in clean water, minimizing turbulence and interference. It is also less prone to damage than transom-mount transducers.

Yes, the DT800-0° transducer is suitable for a wide range of boats, whether sailboats or powerboats, provided the through-hull installation with a 0° hull angle is appropriate and the navigation system is NMEA 2000 compatible.