Zestaw wiatr bezprzewodowy z czujnikiem kompasu do STNG (E70361, T120, E70096, T113-868, A06049, A06036, A06064, A06031, A06028)

The T70344 kit includes several essential components for wind and heading measurement:

A wireless wind sensor (E70361/T120)A wireless compass sensor (E70096)A Tacktick T113-868 bridge, which provides the interface between wireless sensors and the SeaTalk NG networkThe SeaTalk NG cables and connectors required for integration (A06049, A06036, A06064, A06031, A06028)

The main feature of the T70344 kit is its wireless operation for wind and compass sensors. This eliminates the need to run complex cables through the mast, greatly simplifying installation and reducing wiring-related issues.

The T70344 kit is designed to provide apparent wind and true wind data (after calibration), as well as accurate heading information. This data is crucial for sailboat navigation and for the proper operation of an autopilot.

The wireless wind sensor (E70361/T120) is powered by solar energy via built-in panels and includes an internal battery to ensure continuous operation even in low-light conditions.

No, the wireless fluxgate compass sensor (E70096) is powered by an internal battery. It communicates wirelessly with the T113-868 bridge.

The Tacktick T113-868 bridge is the core of the system integration. It wirelessly receives data from wind and compass sensors, converts it, and transmits it to your vessel’s SeaTalk NG wired network, allowing other Raymarine instruments to access this information.

The wireless communication range between Tacktick sensors and the T113-868 bridge is generally sufficient for most sailboats, enabling reliable data transmission from the mast to the bridge location. While exact range may vary depending on the environment, it is designed for standard marine use.

The T70344 kit is designed for simplified installation thanks to its wireless sensor design. The absence of cables to run through the mast reduces complexity. However, a basic understanding of SeaTalk NG networks and marine installation practices is recommended. Raymarine suggests a certified installation for optimal performance.

The wireless wind transducer (E70361/T120) must be mounted at the masthead in a position unobstructed by sails, antennas, or other equipment to ensure accurate wind measurement.

For physically installing the wind transducer at the masthead, you will typically need basic tools such as a drill, wrenches or screwdrivers suited to the provided fastenings, and potentially sealant for cable passages if required. It is also essential to have appropriate safety equipment for working at height.

The T70344 kit is compatible with Raymarine multifunction displays (MFD) from the Axiom and Element series. It integrates seamlessly with these systems via the SeaTalk NG network.

Yes, the T70344 kit is fully compatible with Raymarine i70s instruments. Wind and heading data can be displayed and used by these instruments after integration into the SeaTalk NG network.

The T70344 kit uses Raymarine’s SeaTalk NG protocol. SeaTalk NG is based on NMEA 2000 and is compatible with NMEA 2000 via adapter cables or appropriate interfaces. Once connected to the SeaTalk NG network, data can be shared with other NMEA 2000 devices if the network is properly configured with an NMEA 2000 gateway.

Yes, the accurate true wind data and heading provided by the T70344 kit are essential and directly usable by Raymarine autopilots connected to the same SeaTalk NG network. This enables more precise navigation and better autopilot handling, especially in wind mode.