EasySolar 12/1600 MPPT

The Victron EasySolar 12/1600/70-16 MPPT 100/50 is an all-in-one solar power solution. It integrates an MPPT solar charge controller, a MultiPlus Compact inverter/charger, and AC distribution in a single enclosure. It is designed to simplify installation and energy management from solar and AC sources, particularly for marine applications.

The MultiPlus Compact 12/1600/70 integrated inverter/charger can deliver a continuous power output of 1600 VA (1300 W) at 25°C. Its peak power is 3000 W.

The Victron EasySolar 12/1600/70-16 MPPT 100/50 is designed to operate with a battery system with a nominal voltage of 12 V.

Yes, the EasySolar can charge batteries and power loads from an AC power source or a generator. It has an AC input voltage range of 187 to 265 V AC.

You can connect up to three photovoltaic (PV) panel strings to the EasySolar via the three dedicated MC4 PV connectors (PV-ST01).

The BlueSolar MPPT 100/50 solar charge controller can handle up to 700 W of PV power for a 12 V battery system.

The MPPT 100/50 solar charge controller supports a maximum open-circuit voltage of 100 V from the solar panels.

The PowerAssist technology protects the power supply of the mains or generator from overloads. If power demand exceeds the capacity of the external power source, the inverter adds extra power to compensate, preventing power cuts or circuit breaker trips.

Yes, in the event of a mains power failure or disconnection of the shore/generator power supply, the MultiPlus Compact inverter automatically activates and takes over to power the connected loads. This transfer is so fast (less than 20 milliseconds) that electronic equipment continues to operate without interruption.

The integrated AC distribution includes a 30 mA/16 A RCD and four AC outputs. These outputs are protected by two 10 A circuit breakers and two 16 A circuit breakers. One of the 16 A outputs is controlled by the AC input and only activates when AC power is available.

The integrated battery charger (MultiPlus Compact) can supply a maximum charging current of 70 A for the service battery.

Yes, the MultiPlus Compact has an adaptive battery management system controlled by a microprocessor, with a 4-stage charging characteristic (bulk, absorption, float, storage). It can be pre-set to adapt to different battery types and automatically optimizes the charging process based on battery usage.

Yes, the EasySolar includes full protections, specifically against:

Output short circuitsOverloadsBattery voltages too high or too lowExcessive temperatures230 V AC present on the inverter outputExcessive input voltage ripple

The dimensions of the EasySolar are 745 x 214 x 110 mm (height x width x depth). Its weight is 15 kg.

The EasySolar can operate within a temperature range from -20 to +50°C. It features a fan-assisted cooling system to maintain optimal performance.

Yes, the SmartSolar MPPT controller uses an innovative maximum power point tracking algorithm. In case of partial shading, it can find the optimal maximum power point, which maximizes energy harvesting, unlike conventional MPPTs that may get stuck on a local MPP.

Yes, the EasySolar comes with DC battery cables that are 1.5 meters long, which simplifies installation.

Yes, remote control of the EasySolar is possible. You can use a 3-position switch or a Multi Control digital control panel to manage its functions.

The EasySolar 12/1600/70-16 MPPT 100/50 has an IP 21 protection rating, meaning it is protected against solid objects larger than 12.5 mm and against vertically falling water droplets.

Yes, every MultiPlus Compact is supplied with a battery temperature sensor. When connected, the charging voltage automatically decreases as battery temperature rises, which is particularly recommended for sealed batteries and/or in cases of significant battery temperature fluctuations.