SmartSolar MPPT 150/60-MC4

This is a solar charge controller from the SmartSolar MPPT 150V range designed to optimize energy harvesting from solar panels. It uses ultra-fast MPPT technology to maximize power output, even under cloudy skies or partial shading. This specific model handles a nominal charge current of 60A and is equipped with MC4 connectors for photovoltaic panels.

The SmartSolar MPPT 150/60-MC4 charge controller offers maximum conversion efficiency exceeding 98%. This high efficiency ensures optimal use of energy produced by your solar panels without requiring a cooling fan.

The ultra-fast MPPT technology of the SmartSolar MPPT 150/60-MC4 improves energy harvesting in several ways:

Up to 30 % more compared to PWM charge controllers.Up to 10 % more compared to slower MPPT controllers.It is particularly effective under cloudy skies or when light intensity varies continuously.In case of partial shading, an innovative algorithm always identifies the global maximum power point (MPP) to optimize production, unlike conventional MPPTs that can get stuck on a local MPP.

The SmartSolar MPPT 150/60-MC4 charge controller automatically supports battery voltages of 12 V, 24 V and 48 V. A 36 V battery voltage can also be selected and configured via a software tool.

Yes, the SmartSolar MPPT 150/60-MC4 has a fully discharged battery recovery function. It can initiate charging even if the battery has been discharged to zero volts. It can also reconnect to a fully discharged Li-ion battery with integrated disconnect function.

The controller can be configured and monitored in several ways:

Via Bluetooth Smart: Use the VictronConnect app from a smartphone or tablet for wireless configuration, control, and updates.Via VE.Direct: For a wired connection, the VE.Direct port enables communication with a Color Control GX, other GX products, or a PC.Via the optional SmartSolar LCD display: A plug-in LCD screen can be added for direct monitoring.

The SmartSolar MPPT 150/60-MC4 charge controller can handle the following maximum nominal PV power ratings:

For a 12 V system: 860 W
For a 24 V system: 1720 W
For a 36 V system: 2580 W
For a 48 V system: 3440 W
If a higher PV power is connected, the charge controller will limit the input power to prevent damage.

The controller integrates comprehensive electronic protection, including:

Protection against overheating and power reduction in case of high temperature.Protection against PV short circuits.Protection against PV polarity reversal.Protection against PV reverse current.Protection against output short circuits.

The SmartSolar MPPT 150/60-MC4 model is equipped with two pairs of MC4 connectors for photovoltaic panels. For battery terminals, it uses 35 mm² / AWG2 terminals.

Yes, it is possible to synchronize up to 10 SmartSolar MPPT 150/60-MC4 charge controller units via Bluetooth for parallel charging. This allows managing larger solar installations by combining the power of multiple controllers.

Yes, the regulator is equipped with an internal temperature sensor. This sensor is used to automatically compensate for absorption and floating charge voltages based on ambient temperature, thereby optimizing battery lifespan.

Yes, the controller allows external sensing of battery voltage, temperature, and current via Bluetooth. You can use a Smart Battery Sense, an intelligent battery monitor BMV-712 Smart, or a SmartShunt to communicate this information to one or more SmartSolar controllers.

The controller is designed for indoor use in an unconditioned environment. It has an IP43 protection rating for electronic components and IP22 for the connection area, meaning it is protected against solid objects larger than 1 mm and water splashes (IP43) or dripping water (IP22).

The nominal charging current of the SmartSolar MPPT 150/60-MC4 charge controller is 60 amperes.

Yes, the controller has a flexible charging algorithm. It includes a fully programmable charging algorithm as well as eight pre-programmed algorithms, selectable via a rotary switch or configurable via the VictronConnect app.

The maximum open-circuit voltage (Voc) of the photovoltaic panels you can connect is 150 V in absolute maximum value under the coldest conditions. The maximum starting and operating voltage is 145 V.

Yes, the SmartSolar MPPT 150/60-MC4 charge controller is equipped with a remote on/off function. This allows it to be connected, for example, to a VE.BUS BMS for external control.

The dimensions (height x width x depth) of the SmartSolar MPPT 150/60-MC4 model are 215 x 250 x 95 mm. Its weight is 3 kg.

The autopilot's own power consumption is very low:

Less than 35 mA at 12 V. Less than 20 mA at 48 V. This low consumption minimizes battery drain when the autopilot is inactive or in standby.

Yes, the controller is compatible with lithium batteries. It can even reconnect to a fully discharged Li-ion battery with an integrated disconnect function, which is an important feature for managing this type of battery.