Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 29%

BEP Marine

720-MDVSO

Cuplor de baterii 720-MDVSO BEP

Le commutateur sensible à la tension 720-MDVSO de BEP remplace l'ancienne gamme 720-MDVS en apportant une détection automatique 12/24V et un capteur de position optique. Conçu pour supporter 500A en continu et 2500A au démarrage, il abaisse son seuil de couplage à 13,3V pour s'adapter aux alternateurs modernes. L'appareil est livré avec son câble de commande à 3 fils équipé d'une fiche Wago pour une intégration rapide.

Prix publicBénéficier du tarif pro

1.336,40 RON

1.336,40 RON ~~1.895,10 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tensiune nominală	12/24 V
Amperaj	500.0
Număr circuite	1.0
Număr de poli	2 pôles
Baterii suportate	2.0
Tip întrerupător baterie	Électronique à détection de tension
Metodă control întrerupător baterie	Automatique et manuel
Metodă de protecție a circuitelor	Protégé contre l'allumage (UL 1107)
VSR integrat	Oui
Curent nominal continuu al DVSR	500.0
Tip de montaj	Encastré ou en surface
Indice IP	IP65
Tip ecran	LED
Certificări	UL 1107,Protégé contre l'allumage
Mărime maximă a papucului de cablu (mm)	12 mm
Dimensiuni (L x H x P)	102 x 102 x 109 mm
Detectare tensiune automată	Automatique (12V/24V)
Tensiune de încărcare de absorbție	13.3
Curent continuu (A)	500 A
Tip control	Automatique (sensible à la tension) et manuel (local/à distance)
Curent de pornire (A)	2500 A
Cut In Delay Seconds	5
Cut In Voltage 12v	13.3
Cut In Voltage 24v	26.6
Cut Out Voltage 12v	12.7
Digital Circuitry	Oui
Tensiune de deconectare la descărcare	12.7
Material carcasă	Plastique renforcé de fibres haute température
Curent intermitent (A)	700 A
Lowered Cut In Voltage Benefit	Adapté aux alternateurs à faible rendement et aux environnements à haute température
Curent de încărcare maxim (A)	500.0
Curent maxim de descărcare (A)	500.0
Tensiune DC maximă	32 V
Nume model	720-MDVSO
Interval de tensiune de funcționare	8 à 30.5 V
Optical Position Sense	Oui
Curent de descărcare în vârf	2500.0
Poziții	Auto, Manuel (On/Off), Parallèle d'urgence
Destinația produsului	Gestion et couplage/découplage automatique des parcs de batteries, avec fonction de parallèle d'urgence.
Curent descărcare continuă recomandat	500.0
Replaces Models	720-MDVS, 720-MDVS-24V
Tip de comutator	Commutateur sensible à la tension (VSS) à double fonctionnement
Dimensiune bornă	2 x 12 mm (1/2")
Tip bornă	Goujons (2 x 12mm)
Tip conexiune cablare	Câble à 3 fils avec fiche Wago (pour le contrôle), Goujons (pour la puissance)

Accessoires

Bară omnibus cu 4 bolțuri 500 A

349,17 RON

349,17 RON ~~502,14 RON~~

Cumpără

Bară omnibus 5 conexiuni 650 A

478,49 RON

478,49 RON ~~639,40 RON~~

Cumpără

Port-fuzibil clasa T 600 A

318,92 RON

318,92 RON ~~417,48 RON~~

Cumpără

Cablu 95mm² HI FLEX negru

151,79 RON

151,79 RON ~~219,14 RON~~

151,79 RON m

Cumpără

Cablu 95mm² HI FLEX Roșu

143,06 RON

143,06 RON ~~219,14 RON~~

143,06 RON m

Cumpără

Cablu 70mm² HI FLEX negru

116,08 RON

116,08 RON ~~166,59 RON~~

116,08 RON m

Cumpără

Cablu 70mm² HI FLEX Roșu

114,32 RON

114,32 RON ~~166,59 RON~~

114,32 RON m

Cumpără

Cablu 50mm² HI FLEX negru

105,74 RON

105,74 RON ~~117,43 RON~~

105,74 RON m

Cumpără

Cablu 50mm² HI FLEX Roșu

105,74 RON

105,74 RON ~~117,43 RON~~

105,74 RON m

Cumpără

Description détaillée

Cuplorul separator de baterii 720-MDVSO de la BEP reprezintă o evoluție majoră în gestionarea energiei la bord. Proiectat pentru a înlocui modelele anterioare 720-MDVS și 720-MDVS-24V, acest comutator sensibil la tensiune (VSS) integrează acum o detecție automată duală 12/24V, eliminând necesitatea unei configurări manuale. Construcția sa se bazează pe un circuit numeric avansat cuplat cu un senzor optic de poziție, asigurând o precizie și o eficiență sporite în timpul ciclurilor de cuplare și decuplare a grupurilor de baterii.

Performanțe electrice și praguri optimizate

Acest modul suportă sarcini extreme cu o capacitate de 500A în regim continuu, 700A în regim intermitent și până la 2500A la pornire. Spre deosebire de generația anterioară, 720-MDVSO reduce tensiunea de conectare la 13,3V (26,6V pentru sistemele 24V) după o temporizare de 5 secunde, fiind astfel compatibil cu alternatoarele cu randament redus și cu mediile cu temperaturi ridicate. Tensiunea de deconectare este fixată la 12,7V (25,4V) cu o întârziere de 20 de secunde pentru a evita oscilațiile. Consumul în regim de repaus a fost redus drastic cu 70%, ajungând la sub 5mA în 12V.

Instalare și siguranță marină

Integrarea sistemului este simplificată prin conexiuni de putere robuste cu două bolțuri de 12 mm din cupru cositorit și un cablaj de comandă cu 3 fire echipat cu o fișă Wago. Certificat IP65 și protejat împotriva aprinderii conform standardului UL 1107, carcasa din plastic armat cu fibre rezistente la temperaturi înalte face față condițiilor marine cele mai severe. Sistemul oferă și o funcție de punere în paralel de urgență la distanță timp de 10 minute, precum și o comandă manuală de derogare completă pentru o siguranță maximă la bord.

Documentations

Type	Nom
	EN - Installation and Use Instructions - BAT SW MDVS HD OPTIC 12/24V 500A MC6
	EN - Product Launch Press Release - BAT SW MDVS HD OPTIC 12/24V 500A MC6
	EN - Product Launch Announcement - BAT SW MDVS HD OPTIC 12/24V 500A MC6
	EN - Instructions for Use and Installation - BAT SW MDVS HD OPTIC 12/24V 500A MC6
	EN - Product Launch Press Release - BAT SW MDVS HD OPTIC 12/24V 500A MC6
	EN - Instructions for use and installation - BAT SW MDVS HD OPTIC 12/24V 500A MC6

Avis de l'expert

Pol CONIN

Responsabil digital

« Optical reliability and optimized coupling thresholds for modern alternators »

As a marine electrical systems installer, switching to BEP’s 720-MDVSO model addresses many issues encountered with next-generation alternators. Lowering the coupling threshold to 13.3V finally enables optimal charging without untimely disengagement, especially in hot engine rooms where output voltage tends to drop. The addition of an optical position sensor within the digital circuit mechanically enhances the reliability of the motorized relay—a major advantage for large-capacity service yards. Automatic 12/24V detection and the Wago connector significantly reduce wiring time, while standby parasitic consumption is cut by a third compared to older models. This coupler is a robust industrial solution, capable of handling 2500A at startup, essential for installations requiring reliable emergency coupling.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Cuplor de baterii 720-MDVSO BEP

1.336,40 RON

1.336,40 RON ~~1.895,10 RON~~

Complétez votre installation avec des

Équipements complémentaires

Panou de gestion a bateriei cu 16 întrerupătoare unipolare

BEP Marine

Panou de gestion a bateriei cu 16 întrerupătoare unipolare

Ref : 800-MS3

6.909,38 RON

6.909,38 RON ~~9.861,58 RON~~

BEP Marine

Șunt ampermetru 450 A 50 mV

Ref : LB-450-50

502,36 RON

502,36 RON ~~676,67 RON~~

Blue Sea Systems

Ampermetru M2 DC

Ref : 1832-BSS

2.268,61 RON

2.268,61 RON ~~2.519,87 RON~~

Tablou 8 întrerupătoare unipolare orizontale 12V

BEP Marine

Tablou 8 întrerupătoare unipolare orizontale 12V

Ref : AD063

1.709,10 RON

1.709,10 RON ~~2.392,74 RON~~

Tableau électrique 12 volts CC 4 positions

Blue Sea Systems

Tablou electric 12 volți CC 4 poziții

Ref : 1216-BSS

1.424,33 RON

1.424,33 RON ~~1.769,05 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the DC current capacity of this battery switch?

The BEP 720-MDVSO battery switch offers a DC current capacity of 500A DC.

What is the maximum supported starting current?

This model is designed to handle a cranking current up to 2500A DC.

Is this coupler compatible with 24V systems?

Yes, this switch is auto dual-voltage. It automatically detects and adapts to operate on 12V or 24V DC systems without any manual configuration required.

Can I connect a 12V battery bank with a 24V bank to the same device?

No, although the device is compatible with 12V and 24V, both battery banks must be of the same voltage (either both 12V or both 24V).

At what voltage does the automatic coupling activate?

The cut-in voltage has been lowered to suit low-efficiency alternators. It is set to:

13.3V for a 12V system26.6V for a 24V systemCoupling occurs after a delay of approximately 5 seconds.

At what voltage does battery separation occur?

The cut-out voltage (cut-out), which disconnects the batteries to preserve charge, is:

12.7V for a 12V system25.4V for a 24V systemDisconnection occurs after a delay of approximately 20 seconds.

Is the switch water and dust resistant?

Yes, the switch has an IP65 protection rating, making it resistant to water jets and fully protected against dust.

What is the diameter of the studs for power cables?

The device is equipped with two 12 mm (1/2") tinned copper studs to ensure safe high-current connections.

What are the mounting options for this switch?

The switch can be installed in two ways: flush-mounted or surface-mounted, depending on your electrical panel or technical compartment configuration.

What is the electrical consumption of the device when in standby mode?

Standby power consumption (when the switch is in the "Off" position) is extremely low:

Less than 5 mA at 12V
Less than 5.5 mA at 24V

Is it possible to manually force the activation or deactivation of the switch?

Yes, the 720-MDVSO model has a full manual control (On and Off) allowing you to bypass the automatic system when needed.

What do the colored wires correspond to in the control connection?

The control wiring uses the following colors:

Red: Wire for the optional status LEDGreen: Control wire from the optional remote switchBlack: Negative power supply (ground)

How does the emergency parallel function work?

The device includes a 10-minute emergency parallel connection function. If a remote switch is installed, this function allows temporary coupling of the batteries to start the engine in case the main battery is discharged.

Can this switch be installed in a gasoline engine compartment?

Yes, the switch is ignition-protected and meets UL 1107 safety standards, allowing safe installation in environments with flammable vapors.

Does the device detect load on both battery banks?

Yes, this model has dual sensing (Dual Sensing). It will place battery banks in parallel if either bank receives sufficient charge (for example via a shore charger or alternator).