Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 1%

BEP Marine

80-601-0026-00

Ampermetru analogic 0-150 A

Cet ampèremètre analogique BEP est conçu pour le montage sur tableau et permet une mesure précise du courant continu de 0 à 150A. Il supporte jusqu'à 3 entrées distinctes et est fourni avec un shunt, offrant une solution complète pour le monitoring de vos systèmes DC.

Prix publicBénéficier du tarif pro

1.375,43 RON

1.375,43 RON ~~1.390,34 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Destinația produsului	Surveillance du courant continu dans les systèmes électriques marins
Tip de măsurare	Courant
Subtip de măsurare	Courant continu (DC)
Tip ecran	Aiguille analogique
Interval de măsurare	0-150 A
Interval de măsurare maxim	150 A
Unitate de măsură	Ampères (A)
Shunt necesar	Oui
Valoare shunt	150A
Autoalimentat	Oui
Tip de montaj	Montage sur panneau (Encastré)
Protocol de comunicare	Aucun
Ieșiri alarmă	Aucune
Cod de bare al produsului	50843687004658
Dashboard Integration Suitability	Adapté pour intégration tableau de bord
Dată manual	1997-09-12
Mediu de utilizare	Marin
Consum electric maxim	Nulle
Consum electric tipic	Nulle
Product Benefits Primary	Simplicité, fiabilité visuelle, absence de consommation électrique pour l'affichage
Denumirea modelului	PAN METER ANA AMMETER 0-150AMP
Shunt Included Count	1

Accessoires

Bus Bar commun 150 A - 20 bornes avec couvercle - Common 150A BusBar - 20 Gang with Cover

Bară omnibus comună 150 A - 20 borne cu capac

221,23 RON

Cumpără

Cablu 10mm² HI FLEX Roșu

23,27 RON

23,27 RON ~~25,84 RON~~

23,27 RON m

Cumpără

Cablu 10mm² HI FLEX Negru

23,27 RON

23,27 RON ~~25,84 RON~~

23,27 RON m

Cumpără

Cablu 25mm² HI FLEX Negru

54,10 RON

54,10 RON ~~60,05 RON~~

54,10 RON m

Cumpără

Cablu 25mm² HI FLEX Roșu

54,10 RON

54,10 RON ~~60,05 RON~~

54,10 RON m

Cumpără

Cablu 50mm² HI FLEX negru

105,74 RON

105,74 RON ~~117,43 RON~~

105,74 RON m

Cumpără

Cablu 50mm² HI FLEX Roșu

105,74 RON

105,74 RON ~~117,43 RON~~

105,74 RON m

Cumpără

Bară omnibus cu 4 bolțuri 500 A

349,17 RON

349,17 RON ~~502,14 RON~~

Cumpără

Bară omnibus 5 conexiuni 650 A

478,49 RON

478,49 RON ~~639,40 RON~~

Cumpără

Description détaillée

Ampermetrul analogic BEP PAN METER ANA AMMETER 0-150AMP (referință 80-601-0026-00) este o soluție robustă și fiabilă pentru monitorizarea curentului continuu, proiectată special pentru mediile marine. Acest instrument de bord permite citirea directă și intuitivă a intensității pe un interval de 0 până la 150 amperi.

Concepție și caracteristici cheie

Acest model BEP se remarcă prin capacitatea sa de a gestiona până la trei intrări distincte, oferind flexibilitate pentru monitorizarea mai multor circuite sau sarcini importante la bord. Includerea unui shunt în pachet asigură o măsurare precisă și facilitează integrarea în instalația electrică existentă. Spre deosebire de sistemele de monitorizare numerice mai complexe, precum cele din gama CZone sau ecranele multifuncționale Garmin sau Raymarine, acest ampermetru analogic pune accent pe simplitate, fiabilitatea citirii vizuale și absența consumului electric pentru afișaj.

Poziționare și integrare în sistem

PAN METER ANA AMMETER 0-150AMP de la BEP se încadrează în tradiția mărcii pentru echipamente electrice marine esențiale. El completează în mod ideal sistemele de gestionare a bateriilor și tablourile de distribuție, oferind utilizatorilor o vedere clară și imediată asupra consumului de curent. Proiectat pentru montaj pe panou, asigură o integrare armonioasă în majoritatea tablourilor de bord, unde citirea rapidă și directă a amperajului este esențială pentru gestionarea bateriilor și a sarcinilor DC. Este o alternativă directă și fiabilă la modelele numerice pentru cei care preferă claritatea unui ac indicator.

Documentations

Type	Nom
	EN - Detailed technical sheet - PAN METER ANA AMMETER 0-150AMP
	EN - Technical dimensions and wiring sheet - PAN METER ANA AMMETER 0-150AMP
	EN - Wiring Instructions - PAN METER ANA AMMETER 0-150AMP
	EN - Mounting Template - PAN METER ANA AMMETER 0-150AMP

Avis de l'expert

Pol CONIN

Responsabil digital

« Expert analysis: BEP 0-150A analog ammeter for reliable monitoring »

The BEP 0-150A (80-601-0026-00) analog ammeter is a fundamental solution for monitoring DC electrical systems on board. Its value lies in its simplicity and robustness. In a marine environment where reliability is paramount, an analog instrument provides an instant, uncluttered reading—often quicker to interpret than a digital display for regular visual checks of loads. The ability to handle up to three inputs, combined with the inclusion of a shunt, makes it a versatile choice for monitoring currents up to 150 amperes, covering a wide range of applications from overall consumption to specific circuits. Installation follows standard dashboard equipment procedures, requiring a clean cut-out and careful wiring to the shunt. BEP is recognized for the quality of its marine electrical components, giving this ammeter the durability and accuracy needed for prolonged use at sea.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Ampermetru analogic 0-150 A

1.375,43 RON

1.375,43 RON ~~1.390,34 RON~~

Complétez votre installation avec des

Équipements complémentaires

Comutator baterie 2 bancuri paralele BEP 400 A continu 1/1&2/Paralel/Off 48 V

BEP Marine

Comutator baterie 2 bancuri paralele BEP 400 A continu 1/1&2/Paralel/Off 48 V

Ref : 772-DBC

440,80 RON

440,80 RON ~~606,64 RON~~

BEP Marine

Întrerupător de izolare baterie pentru utilizare intensivă 600 A 48 V

Ref : 720B

398,76 RON

398,76 RON ~~531,36 RON~~

Sélecteur de batterie e-Series 4 positions - Mounting Diagram

Blue Sea Systems

Selector baterie e-Series 4 poziții

Ref : 9001EB-BSS

342,30 RON

342,30 RON ~~382,79 RON~~

Porte fusible ANL 35-300A avec couvercle - ANL Fuse Block with Insulating Cover - 35 to 300A

Porte fusible ANL 35-300A avec couvercle - Dimensioned Drawing

Blue Sea Systems

Port-fuzibil ANL 35-300 A cu capac

Ref : 5005B-BSS

132,65 RON

132,65 RON ~~194,31 RON~~

Blue Sea Systems

Fuzibil MEGA 300A

Ref : 5108B-BSS

76,89 RON

Bloc de fusibles SafetyHub 100 - SafetyHub 100 Fuse Block

Bloc de fusibles SafetyHub 100 - Dimensioned Drawing

Blue Sea Systems

Bloc de siguranțe SafetyHub 100

Ref : 7725B-BSS

710,18 RON

710,18 RON ~~961,44 RON~~

Blue Sea Systems

Ampermetru M2 DC

Ref : 1832-BSS

2.268,61 RON

2.268,61 RON ~~2.519,87 RON~~

Mini ampèremètre OLED- Max 100A - Mini OLED Ammeter - Yellow

Blue Sea Systems

Mini ampermetru OLED – Max. 100A

Ref : 1732B-BSS

518,39 RON

518,39 RON ~~631,58 RON~~

BEP Marine

Secționator bipolar 400 A 48 V

Ref : 770-DP

446,22 RON

446,22 RON ~~620,58 RON~~

BEP Marine

Cupă-baterie telecomandată 275A 32V

Ref : AD185

984,71 RON

984,71 RON ~~1.289,16 RON~~

Disjoncteur série 285 montage en surface 25A - 285-Series Circuit Breaker - Surface Mount 25A

Disjoncteur série 285 montage en surface 25A - Dimensioned Drawing

Blue Sea Systems

Disjunctor serie 285 montaj la suprafață 25 A

Ref : 7180-BSS

321,61 RON

321,61 RON ~~394,80 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What type of device is the PAN METER ANA AMMETER 0-150AMP?

This is a direct-current (DC) analog ammeter designed to be panel-mounted.

What is the measurement range of this ammeter?

This ammeter has a measurement range from 0 to 150 amperes.

Does this meter measure alternating current (AC) or direct current (DC)?

This meter is specifically designed to measure direct current (DC).

How many inputs does this ammeter support?

This ammeter supports up to 3 inputs, allowing monitoring of multiple circuits with the appropriate shunts.

Is a shunt included with the ammeter?

Yes, a shunt is included with the PAN METER ANA ammeter 0-150A.

What is the purpose of the shunt supplied with the ammeter?

The shunt is an essential component that allows the ammeter to measure high currents. The main current flows through the shunt, and the ammeter measures the small voltage drop generated by the shunt, which is proportional to the current.

Is the ammeter display backlit?

Analog BEP ammeters are generally equipped with backlighting for better visibility in low-light conditions. The backlighting power supply is usually provided by the boat's electrical system (12V or 24V DC).

What is the brand of this ammeter?

This ammeter is from the BEP brand.

What is the manufacturing origin of this product?

This product is manufactured in New Zealand.

What is the reference number (SKU) of this ammeter?

The reference number (SKU) for this product is 80-601-0026-00.

Is this meter suitable for marine use?

Yes, as a BEP Marine product, this ammeter is designed for marine environments and boat electrical systems.

How is this ammeter installed?

This ammeter is designed for flush-panel mounting.

How should the shunt be connected to the ammeter?

The shunt must be connected to the ammeter using small sensing wires. The main current circuit to be measured must pass through the high-current terminals of the shunt to enable accurate measurement.

Can this ammeter be used with shunts other than the one supplied?

Yes, this ammeter can be used with other shunts, provided they are compatible and calibrated for a standard voltage drop (e.g., 50mV at full scale for 150A) to ensure accurate readings.

What does the ammeter package include?

The packaging for the ammeter includes the BEP analog ammeter, a 150A shunt, and the mounting hardware required for panel installation.

What is the main function of an analog ammeter on a boat?

The primary function of an analog ammeter on a boat is to monitor the electric current flowing through a specific circuit, such as battery charging current, discharge current, or current consumed by a major piece of equipment. This helps assess energy consumption and the health of the electrical system.