Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 38%

BEP Marine

1002206

Solenoid 12V 100A

Le solénoïde 12V 100A de BEP est un composant de commutation intermittent conçu pour le démarrage des moteurs marins. Avec une capacité de pointe de 750A et des bornes de contact en cuivre 5/16"-24, il assure une fiabilité maximale pour les cycles de démarrage. Ce modèle est compatible avec le standard Cole Hersee M-200 et est livré avec un support de fixation. Idéal pour remplacer un solénoïde défaillant sur tout moteur 12V.

Prix publicBénéficier du tarif pro

263,80 RON

263,80 RON ~~428,58 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tensiune nominală	12 V
Interval de temperatură de funcționare	-40 à 85 °C
Greutate	0.25
Amperaj	100.0
Application Environment Marine	Oui
Application Purpose	Démarrage moteur
Cod de bare al produsului	870216046907
Bep Product Series	Solenoid Engine Starting
Certificări	CE
Material contacte	Cuivre
Control Method	Électromagnétique
Control Voltage	12 V DC
Curent de pornire (A)	750.0
Device Type	Solénoïde
Material carcasă	Plastique
Tip iluminare	Aucun
Curent intermitent (A)	100.0
Durată de viață mecanică (cicluri)	50000.0
Tip de montaj	Montage sur châssis
Odoo Category Full Path	Marchandise / NAVICO GROUP / 11 - BEP / CZone (35)
Număr de prize	0.0
Marca produsului	BEP
Categorie nivel 0 produs	Marchandise
Categorie nivel 1 produs	NAVICO GROUP
Categorie nivel 2 produs	11 - BEP
Categorie nivel 3 produs	CZone (35)
Denumirea modelului	SOLENOID-12VOLT 100AMP
SKU al produsului	1002206
Signal Terminal Stud Size Imperial	#10
Signal Terminal Stud Thread Pitch Imperial	32
Signal Terminal Type	À goujon
Ciclu de lucru solenoid	Intermittent
Tip solenoid	Démarrage moteur
Switching Function	Démarrage moteur
Acțiune a comutatorului	Momentané
Funcție a comutatorului	Démarrage moteur
Terminal Stud Size Imperial	5/16"-24
Tip bornă	À goujon

Accessoires

Cablu 25mm² HI FLEX Roșu

54,10 RON

54,10 RON ~~60,05 RON~~

54,10 RON m

Cumpără

Cablu 25mm² HI FLEX Negru

54,10 RON

54,10 RON ~~60,05 RON~~

54,10 RON m

Cumpără

Cablu 35mm² HI FLEX Roșu

75,60 RON

75,60 RON ~~83,97 RON~~

75,60 RON m

Cumpără

Cablu 35mm² HI FLEX negru

75,60 RON

75,60 RON ~~83,97 RON~~

75,60 RON m

Cumpără

Întrerupător de izolare baterie pentru utilizare intensivă 600 A 48 V

398,76 RON

398,76 RON ~~531,36 RON~~

Cumpără

Comutator baterie 2 bancuri paralele BEP 400 A continu 1/1&2/Paralel/Off 48 V

440,80 RON

440,80 RON ~~606,64 RON~~

Cumpără

Fusible terminal MRBF 100A - MRBF Terminal Fuse - 100A

Fuzibil terminal MRBF 100 A

123,91 RON

Cumpără

Bară omnibus cu 4 bolțuri 500 A

349,17 RON

349,17 RON ~~502,14 RON~~

Cumpără

MaxiBus 250A avec capot - six goujons 5/16"-18 - MaxiBus 250A BusBar - Six 5/16

MaxiBus 250A cu capac - șase bolțuri 5/16"-18

440,53 RON

Cumpără

Description détaillée

Solenoidul 12V 100A de la BEP este un component de comutare robust, proiectat pentru aplicații de pornire a motorului în mediu marin. Cu o capacitate de 100 amperi în regim intermitent, asigură transferul fiabil al curenților de vârf necesari activării demarorului. Terminalele de contact din cupru cu pasul 5/16"-24 și terminalele de semnal cu pasul #10/32 garantează conexiuni electrice solide, conform cerințelor instalațiilor nautice profesionale.

Performanțe și fiabilitate pentru pornirea motorului

Acest solenoid BEP se remarcă prin capacitatea sa de a gestiona curenți de vârf (make rating) de 750 amperi, esențiali pentru lansarea motoarelor. Spre deosebire de releele standard cu capacitate redusă, solenoidul 12V 100A este dimensionat special pentru un ciclu de serviciu intermitent de 10 secunde funcționare la 20 de minute de oprire, ceea ce îl face perfect adaptat ciclurilor de pornire a motorului. Această construcție previne supraîncălzirile și defecțiunile premature observate la componente mai puțin specializate, precum releele de baterie generice. Este direct compatibil cu standardul Cole Hersee M-200, facilitând integrarea ca înlocuire sau upgrade.

Integrare și instalare

Solenoidul 12V 100A este livrat cu un suport de fixare ale cărui găuri de montaj sunt dimensionate la 5/16" x 19/32" cu un pas de 2-13/64". Această standardizare permite înlocuirea rapidă în majoritatea tablourilor electrice marine. Carcasa sa din oțel sau PVC (în funcție de versiune) oferă o protecție adaptată mediului umed al compartimentelor motor. Este compatibil cu toate sistemele de gestionare a bateriilor BEP, în special cu gama de comutatoare de baterii și panourile de distribuție.

Avis de l'expert

Pol CONIN

Responsabil digital

« A reliable standard for engine starting »

The 12V 100A BEP solenoid is a reliable component for engine starting installations. Its ability to handle 750 amperes peak makes it particularly suitable for marine engines, even older or high-displacement models. The 5/16"-24 thread pitch on the contact terminals is a standard that simplifies wiring with heavy-duty cable lugs. I recommend checking the duty cycle (10s ON / 20min OFF) to avoid overheating risks during prolonged use. This is a reliable spare part for replacing a Cole Hersee M-200.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Solenoid 12V 100A

263,80 RON

263,80 RON ~~428,58 RON~~

Complétez votre installation avec des

Équipements complémentaires

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - ML-ACR Automatic Charging Relay with Manual Control - 12V DC 500A

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - Wiring Diagram

Blue Sea Systems

Releu de încărcare automat ML-ACR cu control manual - 12 V CC 500 A

Ref : 7622B-BSS

1.327,17 RON

1.327,17 RON ~~1.958,70 RON~~

BEP Marine

Șunt ampermetru 450 A 50 mV

Ref : LB-450-50

502,36 RON

502,36 RON ~~676,67 RON~~

Mini ampèremètre OLED- Max 100A - Mini OLED Ammeter - Yellow

Blue Sea Systems

Mini ampermetru OLED – Max. 100A

Ref : 1732B-BSS

518,39 RON

518,39 RON ~~631,58 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the primary function of the SOLENOID-12VOLT 100AMP solenoid?

The primary function of this solenoid is to switch high currents, required to activate the starter motor. It allows electrical current to pass to the starter to crank the engine.

Is this solenoid designed for marine use?

Yes, the SOLENOID-12VOLT 100AMP from BEP is specifically designed for 12V DC marine electrical systems.

What is the operating voltage of this solenoid?

This solenoid is designed to operate with 12V DC electrical systems.

What is the nominal current rating in amperes of this solenoid?

It has a rated capacity of 100 amperes, making it suitable for handling engine starting currents.

What are the specifications of the thread sizes for the connection terminals?

The connection terminals of this solenoid are threaded 5/16"-24, ensuring a robust and secure electrical connection.

Why is this solenoid preferred for engine starting compared to a standard relay?

Unlike standard relays with lower capacity, the SOLENOID-12VOLT 100AMP is specifically sized to handle significant transient current peaks required when starting an engine, thus providing increased reliability for this application.

Can this solenoid be used with engines requiring more than 100 amperes at startup?

No, this solenoid is rated for a nominal capacity of 100 amperes. Using it with currents exceeding this value may compromise its operation or damage the product.

How to ensure a secure electrical connection during installation?

To ensure a robust and secure electrical connection, it is essential to use terminals suitable for 5/16"-24 threaded terminals and to tighten all connections properly.

Is this product from the BEP brand?

Yes, this solenoid is a BEP product.

What is the SKU code for this solenoid?

The SKU (Stock Keeping Unit) code for this product is 1002206.

Are there any special precautions to take for installation in a marine environment?

In a marine environment, it is crucial to ensure robust and secure electrical connections to minimize the risks of corrosion and failure due to vibrations and humidity. It is recommended to follow best marine installation practices.

Is this solenoid a component for battery management?

Yes, it is classified in the battery management category, specifically under solenoids.

Can I use this solenoid for applications other than engine starting?

Although this solenoid is specifically designed for engine starting and high-current management, it is sized for this application. Its use for other functions must comply with its 12V DC voltage and maximum capacity of 100 amperes.

What are the advantages of a 5/16"-24 threaded connection for terminals?

The 5/16"-24 threaded studs provide a solid and reliable connection, essential for passing high currents and withstanding vibrations and stresses of the marine environment.

Is this solenoid a relay?

This is a solenoid, which is a type of electromechanical relay. However, it is specifically designed and sized for engine starting applications, handling higher peak currents than standard relays.