Coupe batterie On-Off robuste série HD avec AFD - HD-Series Heavy Duty On-Off Battery Switch with AFD

Coupe batterie On-Off robuste série HD avec AFD - Mounting Diagram

Comutator baterie pornire/oprire robust, seria HD cu AFD

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 30%

Blue Sea Systems

3001B-BSS

Comutator baterie pornire/oprire robust, seria HD cu AFD

Le coupe-batterie BLUE SEA 3001B-BSS de la série HD est une solution ON-OFF robuste pour les systèmes marins à forte demande. Avec une capacité continue de 600A et une protection AFD intégrée, il assure la sécurité de l'alternateur et une isolation fiable d'une batterie unique. Il surclasse les séries m-Series et e-Series en termes de gestion de courant. Inclus : le coupe-batterie 3001B-BSS avec bornes M12 en cuivre étamé.

Prix publicBénéficier du tarif pro

557,04 RON

557,04 RON ~~800,18 RON~~

TTC Expediere calculată la momentul plății.

Stoc redus

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Destinația produsului	Coupe-batterie pour circuits électriques marins
Tip de comutator	Interrupteur manuel On-Off
Curent continuu (A)	600
Curent intermitent (A)	900
Curent de pornire (A)	1750
Tensiune DC maximă	32
Număr de poli	1
Poziții	On-Off
Protecție AFD	Oui
Tip bornă	Borne à vis
Dimensiune bornă	M12
Tip conexiune cablare	Boulon traversant
Tip control	Levier manuel
Tip de montaj	Montage sur panneau
Indice IP	IP66
Interval de tensiune de funcționare	12/24
Greutate	0.59
Conformitate ABYC	Oui
Cable Size To Meet Ratings Awg	4/0
Cable Size To Meet Ratings Mm2	120
Protecție antiexplozivă	Oui
Ignition Protection Standard	UL 1500, SAE J1171, ISO 8846
Terminal Torque Nm	24.86
Certificare UL	Oui
Ul Certification Standard	UL 1107

Accessoires

MaxiBus 250A avec capot - six goujons 5/16"-18 - MaxiBus 250A BusBar - Six 5/16

MaxiBus 250A cu capac - șase bolțuri 5/16"-18

440,31 RON

Cumpără

Bus Bar commun 150 A - 20 bornes avec couvercle - Common 150A BusBar - 20 Gang with Cover

Bară omnibus comună 150 A - 20 borne cu capac

221,12 RON

Cumpără

Mini barre omnibus commune 100A - 5 gangs avec couvercle - Common 100A Mini BusBar - 5 Gang with Cover

Mini bară omnibus comună 100 A - 5 borne cu capac

112,17 RON

Cumpără

Bloc de fusibles SafetyHub 100 - SafetyHub 100 Fuse Block

Bloc de siguranțe SafetyHub 100

709,83 RON

709,83 RON ~~960,96 RON~~

Cumpără

Bloc de fusibles SafetyHub 150 - SafetyHub 150 Fuse Block

Bloc de siguranțe SafetyHub 150

747,61 RON

747,61 RON ~~964,92 RON~~

Cumpără

Bloc de fusibles à lame ST - 12 circuits avec bus négatif et couvercle - ST Blade Fuse Block - 12 Circuits with Negative Bus and Cover

Bloc de siguranțe ST Blade - 12 circuite cu bară negativă și capac

307,03 RON

307,03 RON ~~429,59 RON~~

Cumpără

Bloc de fusibles à lame ST - 6 circuits avec bus négatif et couvercle - ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover

Bloc de siguranțe ST Blade - 6 circuite cu magistrală negativă și capac

249,42 RON

249,42 RON ~~343,69 RON~~

Cumpără

Porte fusible ANL 35-300A avec couvercle - ANL Fuse Block with Insulating Cover - 35 to 300A

Port-fuzibil ANL 35-300 A cu capac

132,59 RON

132,59 RON ~~194,22 RON~~

Cumpără

Porte fusible MEGA AMG 100-300A avec couvercle - MEGA® / AMG® Fuse Block - 100-300A with Cover

Port-fuzibil MEGA AMG 100-300 A cu capac

121,01 RON

121,01 RON ~~175,09 RON~~

Cumpără

Presă-etanșă CableClam 1.40"

139,98 RON

139,98 RON ~~166,03 RON~~

Cumpără

Description détaillée

Comutatorul bateriei ON-OFF robust, seria HD cu AFD de la BLUE SEA, referință 3001B-BSS, este proiectat pentru gestionarea circuitelor de baterie unice în instalații marine solicitante. Cu o capacitate continuă de 600 amperi și o capacitate de pornire de 1.750 amperi timp de 30 de secunde, este potrivit pentru motoare diesel mari și sisteme cu consum energetic ridicat. Acest model se remarcă prin robustețe și funcția Alternator Field Disconnect (AFD), care protejează diodele alternatorului în cazul întreruperii bateriei cu motorul în funcțiune.

Concepție și performanță a seriei HD

Seria HD de la BLUE SEA se poziționează deasupra seriilor m-Series (300A continui) și e-Series (350A continui) în ceea ce privește capacitatea de curent, fiind ideală pentru aplicațiile care necesită gestionarea unei puteri superioare. Bornele din cupru cositorit de 1/2 inch (M12-1.75) oferă o conductivitate maximă și o rezistență la coroziune, cu o construcție monobloc pentru reducerea riscului de supraîncălzire. Lungimea de 7/8 inch (22,22 mm) permite conectarea mai multor manșoane de cablu, facilitând integrarea a până la opt cabluri de încărcare. Cuplul de strângere recomandat este de 24,86 N·m (220 in-lb) pentru cablurile de baterie de 4/0 AWG (120 mm²).

Securitate și conformitate

Modelul 3001B-BSS respectă cerințele American Boat and Yacht Council (ABYC) pentru comutatoarele de baterie. Este listat UL (UL 1107) pentru întrerupătoarele de putere electrică și îndeplinește cerințele de protecție împotriva inflamării externe UL 1500 și SAE J1171, fiind sigur pentru instalarea pe ambarcațiuni cu motor pe benzină. Indicele de protecție IP66 asigură protecție împotriva prafului și a jeturilor de apă puternice, garantând fiabilitatea în mediul marin. Carcasa permite montaj pe suprafață sau pe panou din spate, oferind flexibilitate de instalare.

Documentations

Type	Nom
	6832-003-battery-switches-web_1.pdf

Avis de l'expert

Pol CONIN

Responsabil digital

« Technical analysis of the BLUE SEA HD 3001B-BSS battery isolator with AFD »

The BLUE SEA HD 3001B-BSS battery isolator is positioned as the solution of choice for marine electrical architectures requiring robust and secure management of a single battery. Its continuous rating of 600A is specifically designed for vessels equipped with high-power diesel engines, where high starting and service current demands are significant. Unlike the m-Series or e-Series models, which have lower ratings, the HD 3001B-BSS is engineered for more demanding environments and heavier loads.

The integration of the Alternator Field Disconnect (AFD) function is a major technical advantage. It eliminates the risk of damaging the alternator—a costly component—in the event of an unexpected battery disconnection while the engine is running. This feature, often overlooked, is critical for the longevity of the charging system. Installation requires careful attention to the AFD wiring, which must be connected between the alternator and the voltage regulator. For optimal performance, the use of 4/0 AWG (120 mm²) battery cables is mandatory, with strict adherence to a tightening torque of 24.86 N·m for the M12 terminals.

This switch is ideal for configurations where complete isolation of a single battery (e.g., the starter battery) is required for a specific load group, without selection or combination functions for multiple banks. It is not suitable for installations requiring switching between multiple batteries or complex energy management, for which BLUE SEA’s "Selector" or "Dual Circuit Plus" models would be more appropriate. Its design allows flexible mounting, either surface-mounted or flush-mounted, near the batteries to minimize cable lengths and voltage drops.

Durabilité

Facilité d'installation

Rapport performance / prix

Pièces de rechange

Fusible AMI/MIDI - 30 A (2 pièces) - AMI / MIDI Fuse - 30 Amp

Fuzibil AMI/MIDI - 30 A (2 bucăți)

53,16 RON

Cumpără

Fusible AMI/MIDI - 50 A (2 pièces) - AMI / MIDI Fuse - 50 Amp

Fuzibil AMI/MIDI - 50 A (2 buc.)

53,16 RON

Cumpără

Fuzibil MEGA 300A

76,85 RON

Cumpără

Bouton-poussoir de réinitialisation uniquement. Disjoncteur à connexion rapide (10A) - Push Button Reset Only Quick Connect Circuit Breaker - 10 Amps

Buton de reset exclusiv. Siguranță termică cu conectare rapidă (10A)

43,57 RON

Cumpără

Bouton-poussoir de réinitialisation uniquement. Disjoncteur à connexion rapide (30A) - Push Button Reset Only Quick Connect Circuit Breaker - 30 Amps

Buton de reset exclusiv. Siguranță rapidă (30A)

44,27 RON

Cumpără

Jeu de 60 étiquettes noires - Black 60 Label Set

Set de 60 etichete negre

56,00 RON

56,00 RON ~~67,42 RON~~

Cumpără

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Comutator baterie pornire/oprire robust, seria HD cu AFD

557,04 RON

557,04 RON ~~800,18 RON~~

Complétez votre installation avec des

Équipements complémentaires

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - ML-ACR Automatic Charging Relay with Manual Control - 12V DC 500A

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - Wiring Diagram

Blue Sea Systems

Releu de încărcare automat ML-ACR cu control manual - 12 V CC 500 A

Ref : 7622B-BSS

1.326,51 RON

1.326,51 RON ~~1.957,72 RON~~

Blue Sea Systems

Ampermetru M2 DC

Ref : 1832-BSS

2.267,48 RON

2.267,48 RON ~~2.518,61 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the main function of the BLUE SEA HD series battery switch with AFD?

The robust ON-OFF battery switch HD series with AFD is designed to disconnect a single battery bank in an emergency or when the vessel is not in use. Its Alternator Field Disconnect (AFD) function also protects the alternator diodes if the switch is set to OFF while the engine is running.

What are the current ratings of this battery switch?

This battery switch offers the following current ratings:

Continuous rating: 600 amperesIntermittent rating (5 min): 900 amperesStarting rating (30 sec): 1 750 amperes

What is the maximum operating voltage of this battery switch?

The maximum operating voltage of this battery switch is 32V DC, making it suitable for 12V and 24V systems.

Is the battery disconnect switch protected against water and dust?

Yes, this battery switch has an IP66 ingress protection rating. This means it is fully protected against dust and powerful water jets from any direction.

What are the specifications of the connection terminals?

The connection terminals are made of tin-plated copper with a 1/2-inch (M12-1.75) size. They are one-piece to reduce the risk of overheating and have a length of 7/8 inch (22.22 mm) to accommodate multiple cable lugs, allowing up to eight charge cables to be connected.

What is the recommended torque for battery cable terminal connections?

The recommended torque for battery cable terminals is 24.86 N·m (220 in-lb).

What type of battery cable is recommended for this battery switch?

It is recommended to use 4/0 AWG (120 mm²) battery cables to meet the device's maximum rated current values.

Is this battery switch compliant with safety standards?

Yes, this battery switch complies with several safety standards:

It meets all American Boat and Yacht Council (ABYC) requirements for battery circuit breakers. It is UL Listed (UL 1107) for electrical power switches. It satisfies external ignition protection requirements UL 1500 and SAE J1171.

Can I install this battery switch on a gasoline-powered motorboat?

Yes, this battery switch meets the external ignition protection requirements UL 1500 and SAE J1171, making it safe for installation on gasoline-powered boats.

Where should I install the battery switch?

The battery switch should be installed in an easily accessible location near the batteries.

How to connect the Alternator Field Disconnect (AFD) function?

To enable the AFD function, you must disconnect the wire running from the alternator to the voltage regulator. Then, connect one end of this wire to terminal F1 of the battery switch and the other end to terminal F2.

What precautions should be taken before installing the battery switch?

Before installation, it is imperative to disconnect the battery's positive terminal. It is also strongly recommended to consult a marine electrical professional to ensure correct and secure wiring.

What are the mounting options available for this battery switch?

The housing design allows two mounting options: surface mounting or rear-panel mounting.

What happens if I use battery cables with a smaller gauge than recommended?

If the battery cable size is smaller than the recommended 4/0 AWG (120 mm²), it will reduce the current rating that the battery switch can safely handle.

What precautions should be taken when using the battery isolator switch?

When using the battery switch, follow these precautions:

Turn off all electrical devices before switching the battery to OFF. Never switch to OFF while the engine is running to protect the alternator with the AFD function.

Is this battery switch suitable for large diesel engines?

Yes, with a continuous capacity of 600 amperes, this battery switch is specifically designed for large diesel engines and high-power electrical systems, providing superior power management.

What is the capacity difference between the HD series and the other BLUE SEA battery switch series?

The BLUE SEA HD series, with a continuous capacity of 600 amperes, is designed for applications requiring superior power management. It sits above the m-Series (300A continuous) and e-Series (350A continuous) in terms of current capacity.

Does this product come with a warranty?

Yes, any Blue Sea Systems product that a customer is not satisfied with can be returned for a refund or replacement at any time, in accordance with the manufacturer's warranty.