Conector de trecere perete - Bolțuri 5/16"-18 (Roșu)

The BLUE SEA 2202-BSS watertight bulkhead connector is designed to allow safe passage of high-current cables through bulkheads, firewalls, hulls, and decks. It provides a robust solution to protect cables from abrasion and ensure strain relief, preventing premature wear and short-circuit risks.

This connector is fitted with 5/16"-18 UNC (Unified National Coarse) studs at two locations, designed for reliable connections.

The BLUE SEA 2202-BSS connector can handle a maximum current of 250 amperes (A).

The maximum operating voltage for this connector is 48 volts DC.

Yes, this connector is designed to be waterproof. Its design includes a mounting face that allows for a gasket or sealing to ensure a watertight installation, meeting IP66 standards. This standard provides protection against dust and powerful water jets, including those from rough seas.

The base material of the connector is made of reinforced thermoplastic (Zytel PA66 FR50NC010), which insulates the stud from the bulkhead. The studs are manufactured from tin-plated copper alloy, providing superior corrosion resistance and high conductivity.

The connector ensures a reliable connection thanks to the use of serrated flange nuts. These nuts provide robust and secure connections, essential for managing high-power electrical circuits on board.

This specific BLUE SEA hull penetration connector model is red in color.

Unlike simple cable glands, the 2202-BSS connector provides a robust and secure connection for high-current cables. It features connection studs and serrated flange nuts for reliable terminations, while also offering abrasion protection and strain relief, which a standard cable gland does not.

Yes, the base material of the connector is made of reinforced thermoplastic, which insulates the stud from the bulkhead it is mounted on.

The tin-plated copper alloy studs provide superior corrosion resistance, which is critical in marine environments, and high electrical conductivity for optimal performance.

This connector is ideally suited for applications requiring reliable power distribution management on board vessels, particularly for high-power electrical circuits where connection robustness and safety are critical.

Installation involves drilling holes for studs and mounting screws in the bulkhead, firewall, or deck. The mounting face of the connector is designed to allow application of a sealant or caulking to ensure compliance with IP66 standards. Cables are then connected to the studs using serrated flange nuts.

The connector requires clearance for #10 or M5 screws for mounting. The technical drawing specifies a clearance of 0.21 inches (5.2 mm) for these screws.

To ensure waterproofing, the mounting face of the connector is designed to be used with an appropriate gasket or sealant during installation. This ensures compliance with IP66, protecting against dust and powerful water jets.

The connector is designed to be mounted on bulkheads, firewalls, hulls, and decks, allowing safe cable passage through these surfaces in a marine environment.

Yes, the dimensional drawing shows spacing between the centers of the mounting holes. The horizontal spacing is 2.00 inches (50.8 mm) and the vertical spacing is 1.31 inches (33.3 mm) between the centers of the mounting holes.

This connector is compatible with cables whose terminals match the 5/16"-18 stud size. It is specifically designed for high-current cables requiring a robust and secure connection.

Yes, this connector is specifically designed for marine environments. Its corrosion-resistant materials (tinned copper studs, reinforced thermoplastic base) and IP66 compliance make it ideal for nautical applications, including those exposed to spray and powerful water jets.

The BLUE SEA 2202-BSS connector is rated for a maximum voltage of 48V DC (direct current). It is not recommended for alternating current (AC) applications unless AC voltage and current specifications are clearly defined and below DC ratings, which is not the case here.