Disjunctor serie 285 - Montaj la suprafață 40 A

The BLUE SEA 285 series circuit breaker is an electrical protection device specifically designed for marine circuits. This model, the 7182-BSS, has a 40 ampere rating and is intended for surface-mount installation. It protects equipment and cables from damage caused by overcurrents.

This circuit breaker has a rated current of 40 amperes (40 A). This means it is designed to operate normally up to this current and will trip in case of a significant overload to protect the circuit.

This circuit breaker protects marine electrical circuits against overcurrents and short circuits. In case of failure or overload, it automatically interrupts the current to prevent damage to connected equipment and cables, ensuring the safety of the installation.

The main difference is that this circuit breaker is resettable. Unlike a fuse, which must be replaced after tripping, the 285 series circuit breaker can be manually reset once the cause of the overcurrent has been resolved, providing convenience and reducing the need for spare parts.

Yes, the BLUE SEA 285 series circuit breaker is specifically designed for marine environments. It is made with corrosion-resistant materials and features a robust design to withstand harsh conditions encountered on board boats, including moisture and vibrations.

This circuit breaker provides thermal protection against overcurrents. It is designed to trip when the current exceeds its rated value for a given period, thus protecting cables and equipment from overheating and damage.

This circuit breaker is equipped with a manual reset mechanism. After tripping due to an overcurrent, you must identify and correct the cause of the overload. Then, you can reset the circuit breaker by pressing the lever or reset button, depending on the specific model.

The Blue Sea 285 series circuit breaker is generally designed for direct current (DC) systems and can support a maximum voltage of 48V DC. It is compatible with 12V, 24V, and 48V DC systems commonly used in marine applications.

The interrupting rating (AIC - Amperes Interrupting Capacity) of this circuit breaker is 3000 amperes at 48V DC. This indicates the maximum current the circuit breaker can safely interrupt during a short-circuit without being damaged.

Yes, the Blue Sea 285 series surface-mount circuit breaker is rated IP67. This rating means it is protected against dust and can withstand temporary immersion in water (up to 1 meter for 30 minutes), making it ideal for exposed marine environments.

This circuit breaker is designed for surface mounting. This means it is fixed directly onto a wall or panel using screws, without requiring any cut-out for flush mounting. Its design allows for easy and quick installation.

The circuit breaker is mounted on a surface using screws. It has integrated mounting holes in its housing. Simply position the circuit breaker at the desired location, mark the drilling points, then screw it securely to the surface.

For the electrical installation of this circuit breaker, basic tools are generally required, such as screwdrivers, wire strippers, crimping pliers for cable terminals, and a socket or open-end wrench to tighten the connection stud nuts. Ensure you use the appropriate tools to guarantee safe connections.

Yes, the Blue Sea 285 Series circuit breaker can be mounted in any orientation (vertical, horizontal, or inverted) without affecting its performance or protective capacity. This provides great flexibility for integration into various electrical panel configurations onboard.

Yes, this circuit breaker is fully compatible with marine electrical systems operating at 12V DC and 24V DC. Its maximum voltage rating of 48V DC makes it suitable for a wide range of low-voltage applications onboard vessels.

With a 40 A rating, this circuit breaker is suitable for protecting medium-power circuits. It can be used for equipment such as bilge pumps, small windlasses, navigation systems, DC-DC converters, or other significant loads on board requiring overcurrent protection.

Yes, depending on the total consumption of your boat's main circuit, a 40 A circuit breaker can be used to protect the main circuit, particularly on smaller installations. For larger boats with higher consumption, higher-rated circuit breakers may be required.

No, the Blue Sea 285 series circuit breaker is specifically designed and certified for direct current (DC) systems up to 48V DC. It must not be used for alternating current (AC) electrical installations, as it would not provide adequate protection and could be hazardous.

Although designed for marine environments, this circuit breaker can technically be used in land-based or automotive applications requiring 40 A DC circuit protection, provided the voltage and current specifications match the system requirements. Its robustness and moisture resistance are also advantages in these contexts.