m-Series Automatic Charging Relay - 12/24V DC 65A - m-Series Automatic Charging Relay - 12/24V DC 65A

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 7%

Blue Sea Systems

7601-BSS

Releu de încărcare automat serie m - 12/24 V CC 65 A

Conçu pour la gestion automatique de deux parcs batterie, le relais de charge Blue Sea m-Series 7601 gère des systèmes 12/24V avec 65A en continu.

Sa fonction d'isolation au démarrage protège l'électronique embarquée des creux de tension. Ce modèle fait partie de la gamme m-Series de Blue Sea, reconnue pour sa fiabilité.

Inclus : un capot isolant et un connecteur rapide pour la mise à la terre.

Prix publicBénéficier du tarif pro

521,39 RON

521,39 RON ~~563,80 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tensiune nominală	12/24 V
Indice IP	IP67
Battery Banks	2.0
Combine Voltage	12V DC: 13.6V DC (30 sec) ou 13.0V DC (2 min); 24V DC: 27.2V DC (30 sec) ou 26.0V DC (2 min)
Curent continuu (A)	65.0
Protecție antiexplozivă	Oui
Ignition Protection Standards List	ISO 8846,SAE J1171
Intermittent Current 5min	115
Mounting Cutout Diameter Front Mm	67
Mounting Cutout Diameter Rear Mm	59
Tip de montaj	Surface, arrière ou panneau
Open Voltage	12V DC: 12.35V DC (10 sec) ou 12.75V DC (30 sec); 24V DC: 24.7V DC (10 sec) ou 25.5V DC (30 sec)
Over Voltage Lockout Threshold 12v	16.0V DC
Product Application Scenario	marine,véhicules récréatifs,systèmes d'alimentation hors réseau
Tipul releului	Relais de charge automatique (ACR)
Start Isolation	Oui
Undervoltage Lockout Threshold 12v	9.5V DC
Undervoltage Lockout Threshold 24v	19.0V DC
Undervoltage Reset Threshold 12v	10.0V DC
Undervoltage Reset Threshold 24v	20.0V DC

Accessoires

Bloc de fusibles SafetyHub 100 - SafetyHub 100 Fuse Block

Bloc de siguranțe SafetyHub 100

710,18 RON

710,18 RON ~~961,44 RON~~

Cumpără

Bloc-fusible terminal MRBF - 30 à 300 A - MRBF Terminal Fuse Block - 30 to 300A

Bloc-fuzibil terminal MRBF - 30 până la 300 A

186,33 RON

186,33 RON ~~214,74 RON~~

Cumpără

Fusible terminal MRBF 100A - MRBF Terminal Fuse - 100A

Bloc de siguranțe ST Blade - 12 circuite cu bară negativă și capac

307,18 RON

307,18 RON ~~429,81 RON~~

Cumpără

MaxiBus 250A avec capot - six goujons 5/16"-18 - MaxiBus 250A BusBar - Six 5/16

MaxiBus 250A cu capac - șase bolțuri 5/16"-18

440,53 RON

Cumpără

Interrupteur de batterie série m 300A rouge unipolaire - m-Series Mini On-Off Battery Switch with Knob - Red

Întrerupător de baterie serie m 300 A roșu unipolar

204,50 RON

204,50 RON ~~250,99 RON~~

Cumpără

Sélecteur de batterie série m 300A rouge 3 positions - m-Series Selector 3 Position Battery Switch - Red

Selector de baterie serie m 300 A roșu 3 poziții

341,82 RON

341,82 RON ~~378,55 RON~~

Cumpără

Presă-etanșă CableClam 0,68"

124,40 RON

124,40 RON ~~144,99 RON~~

Cumpără

Kit de conversion de panneau 360° - 12 à 24 V CC - 360 Panel Conversion Kit - 12 to 24V DC

Kit de conversie panou 360° - 12 la 24 V CC

57,10 RON

Cumpără

Porte fusible ANL 35-300A avec couvercle - ANL Fuse Block with Insulating Cover - 35 to 300A

Port-fuzibil ANL 35-300 A cu capac

132,65 RON

132,65 RON ~~194,31 RON~~

Cumpără

Description détaillée

Proiectat pentru gestionarea automată a sistemelor cu două parcuri de baterii, releul de încărcare automat (ACR) Blue Sea m-Series 7601 asigură o distribuție eficientă a energiei pentru instalațiile de 12V CC sau 24V CC. Acest model este ideal pentru ambarcațiunile cu motor, vehiculele recreative și sistemele de alimentare off-grid care necesită o capacitate de încărcare de până la 65 amperi în regim continuu și 115 amperi în regim intermitent (5 minute).

Caracteristici și performanțe tehnice

Modelul m-Series 7601 se remarcă prin capacitatea sa de a combina automat bateriile în timpul încărcării și de a le izola la descărcare sau la oprire, optimizând astfel disponibilitatea energiei și protejând bateria de pornire. Datorită detectării duble, acesta identifică prezența unei sarcini pe unul sau pe celălalt parc de baterii. Include o funcție de izolare la pornire (SI) care protejează echipamentele electronice sensibile împotriva căderilor și vârfurilor de tensiune la pornirea motorului. Comparativ cu izolatoarele de baterii tradiționale cu diode, ACR-urile precum 7601 oferă o eficiență superioară, generând mai puțină căldură și consumând mai puțină energie de încărcare.

Securitate și instalare

Acest releu este ignifug, conform cerințelor de protecție împotriva aprinderii externe ISO 8846 și SAE J1171, fiind astfel sigur pentru instalare pe ambarcațiuni cu motor pe benzină. Clasificarea IP67 garantează protecție împotriva imersiei temporare până la 1 metru timp de 30 de minute. Pragurile de tensiune pentru combinare sunt de 13,6V CC (30 sec) sau 13,0V CC (2 min) pentru sistemele de 12V, respectiv 27,2V CC (30 sec) sau 26,0V CC (2 min) pentru sistemele de 24V. Deschiderea se realizează la 12,75V CC (30 sec) sau 12,35V CC (10 sec) pentru sistemele de 12V. Este echipat cu borne cu știfturi 1/4"-20 (M6) și acceptă cabluri până la 1/0 AWG, cu o dimensiune recomandată de 6 AWG (16 mm²) pentru a respecta curenții nominali. Un indicator LED integrat furnizează informații vizuale despre starea ACR, inclusiv modurile de încărcare, izolare, tensiune scăzută și defect. Un capac izolant detașabil și un conector rapid 1/4" x .032" pentru împământare sunt incluse pentru a facilita instalarea și protecția bornelor.

Documentations

Type	Nom
	EN - Diagnostic Flowchart - m-Series Automatic Charging Relay - 12-24V DC 65A
	EN - Dimension Drawing - m-Series Automatic Charging Relay - 12-24V DC 65A
	EN - Instructions - m-Series Automatic Charging Relay - 12-24V DC 65A
	EN - Choose The Right ACR - m-Series Automatic Charging Relay - 12-24V DC 65A
	EN - Certificate - m-Series Automatic Charging Relay - 12-24V DC 65A

Avis de l'expert

Pol CONIN

Responsabil digital

« Technical analysis: Blue Sea m-Series 7601 automatic charging relay »

The Blue Sea m-Series 7601 automatic charge relay (ACR) is a key component for optimizing energy management on vessels equipped with two battery banks, typically a starter battery and a house battery. Its ability to operate on 12V or 24V DC systems with a continuous current of 65A makes it a reliable solution for medium-sized alternators, commonly found on outboard motors or small inboard engines. This model is particularly relevant for recreational boaters seeking fully automatic charging without manual intervention.

One of the 7601’s major advantages is its Start Isolation (SI) function. This feature effectively protects sensitive onboard electronics by temporarily isolating the house circuit from the starter circuit, preventing harmful voltage fluctuations. Installation is straightforward for a marine electrician, requiring positive connections with appropriate fuses, grounding, and the optional SI line connection. It is critical to follow the recommended cable sizes (minimum 6 AWG) and ensure installation in a protected location, though its IP67 certification provides good resistance to marine environments.

Compared to higher-capacity models in the same series (such as the 7610/7611 at 120A or the 7620/7622 at 500A), the 7601 is specifically suited for applications where alternator output does not exceed 65A, offering a balance between performance, compactness, and cost. It does not replace a battery switch for emergency starting but optimizes daily charging. It is therefore ideal for cruising sailboats or small motorboats where simplicity and reliability in charge management are priorities, without the constraints of a more complex or oversized system. It is important to note that this model is not designed to handle engine starting currents.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Releu de încărcare automat serie m - 12/24 V CC 65 A

521,39 RON

521,39 RON ~~563,80 RON~~

Complétez votre installation avec des

Équipements complémentaires

Mini Add-A-Battery Kit - 65A - Mini Add-A-Battery Kit - 65A

Blue Sea Systems

Kit de adăugare baterie Mini - 65 A

Ref : 7649-BSS

840,58 RON

840,58 RON ~~927,12 RON~~

Blue Sea Systems

Ampermetru M2 DC

Ref : 1832-BSS

2.268,61 RON

2.268,61 RON ~~2.519,87 RON~~

Mini ampèremètre OLED- Max 100A - Mini OLED Ammeter - Yellow

Blue Sea Systems

Mini ampermetru OLED – Max. 100A

Ref : 1732B-BSS

518,39 RON

518,39 RON ~~631,58 RON~~

Panneau de disjoncteur Contura 4 positions - Water Resistant Circuit Breaker Panel 4 Position-Black

Blue Sea Systems

Panou de siguranțe Contura 4 poziții

Ref : 8372-BSS

960,47 RON

960,47 RON ~~1.075,70 RON~~

Panneau de disjoncteur Contura 8 positions - Water Resistant Circuit Breaker Panel 8 Position-Black

Blue Sea Systems

Panou de siguranțe Contura 8 poziții

Ref : 8371-BSS

1.662,77 RON

1.662,77 RON ~~1.836,71 RON~~

Panneau de disjoncteur étanche WeatherDeck® 12V DC - Gris 8 positions - WeatherDeck® 12V DC Waterproof Circuit Breaker Panel - Gray 8 Positions

Blue Sea Systems

Panou de întrerupător etanș WeatherDeck® 12 V CC - Gri 8 poziții

Ref : 4378-BSS

1.183,26 RON

1.183,26 RON ~~1.396,18 RON~~

Tableau électrique 12 volts CC 4 positions

Blue Sea Systems

Tablou electric 12 volți CC 4 poziții

Ref : 1216-BSS

1.424,33 RON

1.424,33 RON ~~1.769,05 RON~~

12/24V Dual USB 4.8A Chargers - Switch Mount - 12/24V Dual USB 4.8A Chargers - Switch Mount

Blue Sea Systems

Încărcătoare dublu USB 12/24 V 4,8 A - Pentru montare pe întrerupător

Ref : 1039-BSS

260,48 RON

260,48 RON ~~312,06 RON~~

12/24V DC Dual USB Charger 4.8A with Intelligent Device Recognition - 12/24V DC Dual USB Charger 4.8A with Intelligent Device Recognition

Blue Sea Systems

Încărcător dublu USB 12/24 V CC 4,8 A cu recunoaștere inteligentă a dispozitivelor

Ref : 1045-BSS

271,53 RON

271,53 RON ~~319,51 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is an automatic charge relay (ACR) and how does the Blue Sea m-Series 7601 work?

The Blue Sea m-Series 7601 automatic charge relay (ACR) is designed to automatically manage dual-battery bank systems. It combines batteries during charging for efficient power distribution and isolates them during discharge or shutdown, protecting the starter battery and optimizing energy availability.

What are the continuous and intermittent current ratings of this charge relay?

This automatic charge relay has a continuous current capacity of 65 amperes. Its intermittent current capacity is 115 amperes, maintained for 5 minutes.

Is the Blue Sea m-Series 7601 relay suitable for 12V and 24V systems?

Yes, the Blue Sea m-Series 7601 automatic charge relay is designed to operate with 12V DC or 24V DC electrical systems.

What are the main functions of the m-Series 7601 charge relay?

Main functions include automatic battery combining during charging, battery isolation during discharge, dual charge detection on either battery bank, and a Start Isolation (SI) function to protect sensitive electronic equipment.

How does the m-Series 7601 charge relay ensure the safety of electronic equipment during engine start-up?

The relay includes a soft-start isolation function (SI) that protects sensitive electronic equipment from voltage drops and spikes that can occur during engine start-up.

What is the efficiency of the m-Series 7601 charge relay compared to traditional battery isolators?

Compared to traditional diode-based battery isolators, the m-Series 7601 charge relay offers higher efficiency. It generates less heat and consumes minimal charging energy.

Is this relay spark-proof for use on gasoline-powered boats?

Yes, this relay is flame-resistant and compliant with external ignition protection requirements per ISO 8846 and SAE J1171, making it safe for installation on gasoline-powered boats.

What is the water and dust protection rating of this charging relay?

The Blue Sea m-Series 7601 automatic charge relay is rated IP67, providing protection against temporary immersion up to 1 meter for 30 minutes.

Where is the best place to install the m-Series 7601 charge relay?

To prevent corrosion of wires and connection terminals, it is recommended to install the relay in a dry and protected location if possible. Avoid locations directly above battery banks.

What is the recommended torque for the stud terminal bolts?

The recommended torque for terminal studs is 60 in-lbs (6.8 Nm).

What type of cable and fuse should I use to connect the charge relay?

For a continuous load capacity of 65 amps, it is recommended to use a minimum cable size of 6 AWG (16mm²) and a 90A-100A fuse. The maximum supported cable size is 1/0 AWG (50mm²).

How to connect the start isolation line (SI)?

The starter isolation line (SI) must be connected to the terminal or wire running from the ignition switch to the starter solenoid. This connection must be energized only during starting and must be fused with an inline fuse of one to ten amps.

Can the m-Series 7601 charge relay be used for engine starting currents?

No, the m-Series 7601 charge relay is not designed to handle starting currents. If batteries must be combined for emergency starting, a battery switching system with a combining/parallel function must be used.

How to connect positive battery banks to the relay?

Connect the positive terminal of one battery bank to one of the 1/4"-20 studs, and the positive terminal of the other battery bank to the other 1/4"-20 stud. Both positive connections must be made through appropriately sized circuit protection (fuse).

How to connect the ground (GND) terminal of the relay?

The quick-connect terminal marked GND (ground) must be connected to the DC system ground via an inline fuse rated at 1 ampere. This prevents fault currents in this wire.

What is the maximum alternator output supported by this charging relay?

This automatic charge relay can support alternators up to 65 amperes.

What are the voltage thresholds for the relay to combine the batteries in a 12V system?

For a 12V system, the relay will combine the batteries if the voltage at either terminal is higher than 13.6V DC for 30 seconds or higher than 13.0V DC for 2 minutes.

At what voltage are the batteries isolated in a 24V system?

For a 24V system, the batteries are isolated when the voltage at either terminal drops below 25.5V DC for 30 seconds or below 24.7V DC for 10 seconds.

Does the relay have undervoltage or overvoltage protection?

Yes, the relay includes undervoltage protection (lockout at 9.5V DC for 12V systems and 19V DC for 24V systems) and overvoltage protection (lockout at 16.0V DC for 12V systems).