Mini bară omnibus de masă comună 100 A - 6 borne

A common ground busbar is a centralized connection point for all ground wires (negatives) of the various electrical equipment on a boat or vehicle. It organizes and simplifies wiring by grouping ground connections in one location, making troubleshooting easier and improving the reliability of the electrical system.

This mini busbar is designed to handle a maximum cumulative current of 100 amperes (A). It is important not to exceed this value to ensure the safety and proper operation of your electrical installation.

This busbar is equipped with 6 terminals, allowing you to connect up to six different ground circuits to a common point.

The ISO 8846 certification, issued by the International Marine Certification Institute (IMCI), confirms that this busbar is protected against ignition of surrounding flammable gases. This feature is critical for marine electrical installations, as it reduces the risk of fire or explosion on board, in compliance with the Recreational Craft Directive 94/25/EC.

Yes, absolutely. This product is ISO 8846 certified by IMCI and meets the requirements of the Recreational Craft Directive 94/25/EEC (as amended by 2003/44/EC), attesting to its compliance and safety for marine applications.

Improved organization of the ground wiring. Increased reliability of the electrical system. Easier troubleshooting and maintenance thanks to centralized connections. Enhanced safety due to its marine certification against gas ignition. A compact and space-saving solution, ideal for limited spaces.

Yes, the Blue Sea Systems busbar range offers busbars with different capacities and numbers of terminals. For example, for more extensive mass distribution needs, there are models such as the BusBar 20 Gang (references 2307, 2312) or the MiniBus 5 x 8-32 (reference 2314), which provide more connection points or capacities suited to more complex systems.

Yes, this compact busbar is particularly well suited to small to medium-sized electrical systems. Its compact design and 100 A capacity make it an ideal solution for consolidating grounds for a limited number of devices in spaces where space is a critical factor.

No, this mini bus bar model is not supplied with protective caps or covers. It is designed to be installed as-is in a suitable environment.

The primary function of a ground busbar is to collect and distribute the return currents (negative) from all electrical devices back to the battery or the main ground point of the system. Conversely, a positive busbar distributes the positive current from the battery to the various devices. Both are essential for an organized and secure electrical installation.

Yes, as a product certified for marine environments, this busbar is designed to withstand harsh conditions, including corrosion. Blue Sea Systems products intended for this use are manufactured with materials and finishes suited to ensure long service life and reliable performance in wet and salty environments.

This busbar is typically mounted using screws. It features mounting holes for this purpose. It is recommended to secure it on a flat and stable surface, in a dry and easily accessible location for maintenance and wiring.

For reliable and secure connections, it is recommended to use ring terminals (or crimp terminals) of the appropriate size for the terminal screws. Ensure the terminals are properly crimped onto the cables to guarantee good conductivity and avoid false contacts.

Yes, it is imperative to disconnect all power sources, including the main battery, before installing or making any modifications to the electrical system. This prevents the risks of short circuits, electric shock, or equipment damage.

The terminals on this busbar are fitted with #8-32 threaded studs. Therefore, you must use ring terminals with a hole matching this screw size to ensure a secure and optimal connection. Wire gauge must be selected based on the connected circuit's amperage, without exceeding the busbar's total capacity of 100 A.

The busbar must be installed in a dry location, protected from water splashes and easily accessible for connections and maintenance. Ideally, it should be located near the equipment it powers or the main ground point to minimize cable length and optimize organization.

Yes, ground bus bars like this one are generally passive and are not limited by system voltage (12V, 24V or even 48V DC) as long as the cumulative current capacity of 100 A is not exceeded. They serve as a common connection point for the ground return, regardless of the operating voltage of the connected devices.

Yes, this bus bar is a standard wiring component. It is designed to accept ground connections from any electronic or electrical device, regardless of brand, as long as individual and cumulative current requirements and physical connections (terminals) are appropriate.

Although specifically certified and optimized for the marine environment, this busbar can be used in other applications requiring a common and organized power distribution, such as in recreational vehicles (motorhomes), off-grid solar systems, or other DC electrical installations where a robust and reliable solution is required.

No, this busbar is specifically designed for direct current (DC) electrical systems, such as those found in boats, vehicles, and battery systems. It is not suitable for mass distribution in alternating current (AC) systems.