Deckhand Dimmer - 12V DC 6A - Deckhand Dimmer - 12V DC 6A

Deckhand Dimmer - 12V DC 6A - Dimensioned Drawing

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 11%

Blue Sea Systems

7506-BSS

Variator Deckhand - 12 V CC 6 A

Q: What type of lighting can the Deckhand 7506-BSS dimmer control?

The Deckhand 7506-BSS dimmer is designed to digitally control the brightness of unregulated LED lights, incandescent lights, and halogen lights.

Q: What is the nominal operating voltage of this Blue Sea Systems variable speed drive?

This drive operates at a nominal voltage of 12 V DC.

Q: What is the input voltage range accepted by the Deckhand 7506-BSS autopilot drive?

The Deckhand 7506-BSS drive can operate within a voltage range from 9 V to 16 V DC.

Q: What is the maximum output current capacity of this dimmer?

The maximum output current capacity of the Deckhand 7506-BSS autopilot drive is 6 A.

Q: What is the function of the built-in 'Bulb Saver' in the autopilot?

The 'Bulb Saver' function (bulb saver) is designed to prevent excessive aging of bulbs during the boat's electrical system charging phases.

Q: Does the dimmer store the last brightness setting?

Yes, the Deckhand 7506-BSS autopilot has memory for the last brightness setting used.

Q: What is the operating temperature range of this drive?

The inverter is designed to operate within a wide temperature range, from -40 °C to 85 °C.

Q: What is the maximum leakage current of the device?

The maximum leakage current of the Deckhand 7506-BSS autopilot drive is less than 2 mA.

Q: What type of brightness control is used by the Deckhand dimmer?

The drive uses continuous pulse-width modulation (PWM) control, allowing adjustment from 0 to 100% of the input voltage.

Q: Is this autopilot supplied with a switch?

Yes, the throttle is supplied with a momentary switch (ON)-OFF-(ON).

Le variateur Deckhand 7506-BSS de BLUE SEA est une solution numérique de 12 V CC et 6 A pour le contrôle de l'intensité des éclairages marins (LED non régulées, incandescents, halogènes).

Il offre une modulation PWM continue, une mémoire de réglage, et une fonction "bulb saver", et est livré avec un interrupteur momentané (ON)-OFF-(ON).

Ce modèle, qui remplace les 7501/7502, fait partie de la gamme Deckhand, reconnue pour sa fiabilité et sa conformité aux normes ISO 8846 et SAE J1171.

Tensiune: 12 V

12 V 24 V

Curent: 6 A

6 A 12 A

Prix publicBénéficier du tarif pro

531,68 RON

531,68 RON ~~597,85 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tip interfață de control	Numérique (PWM)
Tip control	Interrupteur momentané (ON)-OFF-(ON)
Sisteme iluminat compatibile	LED non régulées, incandescentes, halogènes
Zone Control	Non
Interval de tensiune de funcționare	9-16
Consum electric tipic	<0.024
Tipul instalației	Montage sur panneau
Dimensiuni produs	82.55 x 88.9 x 44.45
Variator compatibil	Oui
Conținut pachet	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Certificări	CE,ISO 8846,SAE J1171,SAE J1455,SAE J1113
Numele producătorului	BLUE SEA SYSTEMS
Numărul piesei fabricantului	7506
Maximum Output Current	6
Maximum Parasitic Current	2
Tensiune nominală	12
Temperatură maximă de funcționare	85
Temperatură minimă de funcționare	-40
SKU al produsului	7506-BSS

Accessoires

Bloc de fusibles SafetyHub 100 - SafetyHub 100 Fuse Block

Bloc de siguranțe SafetyHub 100

710,18 RON

710,18 RON ~~961,44 RON~~

Cumpără

Bloc de fusibles à lame ST - 6 circuits avec bus négatif et couvercle - ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover

Bloc de siguranțe ST Blade - 6 circuite cu magistrală negativă și capac

249,54 RON

249,54 RON ~~343,86 RON~~

Cumpără

Bloc-fusible terminal MRBF - 30 à 300 A - MRBF Terminal Fuse Block - 30 to 300A

Bloc-fuzibil terminal MRBF - 30 până la 300 A

186,33 RON

186,33 RON ~~214,74 RON~~

Cumpără

MaxiBus 250A avec capot - six goujons 5/16"-18 - MaxiBus 250A BusBar - Six 5/16

MaxiBus 250A cu capac - șase bolțuri 5/16"-18

440,53 RON

Cumpără

Bornier 30A 10 circuits - Terminal Block 30A - 10 Circuit

Cavalier de bornier pentru borniere 30A

5,58 RON

5,58 RON ~~6,43 RON~~

Cumpără

Presă-etanșă CableClam 0,68"

124,40 RON

124,40 RON ~~144,99 RON~~

Cumpără

CableClam with Stainless Steel Dress Cap 0.68" - CableClam with Stainless Steel Dress Cap 0.68

Presă-etanșare CableClam cu capac de finisare din oțel inoxidabil 0.68"

173,62 RON

173,62 RON ~~200,80 RON~~

Cumpără

Adaptor pentru întrerupător basculant serie Rocker

22,84 RON

22,84 RON ~~27,61 RON~~

Cumpără

Panneau de disjoncteur Contura 4 positions - Water Resistant Circuit Breaker Panel 4 Position-Black

Panou de siguranțe Contura 4 poziții

960,47 RON

960,47 RON ~~1.075,70 RON~~

Cumpără

Description détaillée

Proiectat pentru gestionarea iluminatului marin, variatorul Deckhand 7506-BSS de la BLUE SEA SYSTEMS oferă un control numeric precis al intensității luminoase. Acest dispozitiv este compatibil cu iluminatul LED nereglat, incandescent și halogen care funcționează la o tensiune nominală de 12 V CC, cu un interval de funcționare de la 9 V la 16 V.

Caracteristici Tehnice și Performanță

Variatorul Deckhand 7506-BSS utilizează o comandă prin modulație a lățimii impulsurilor (PWM) continuă, permițând reglarea de la 0 la 100 % a tensiunii de intrare. Capacitatea sa maximă de ieșire este de 6 A, în timp ce curentul parazit rămâne sub 2 mA. Funcționează într-un interval extins de temperaturi, de la -40 °C la 85 °C. O funcție de protecție a becului previne îmbătrânirea prematură a acestuia în timpul fazelor de încărcare a sistemului. Acest model dispune și de o memorie pentru ultima setare a luminozității și o ieșire iluminată cu o temporizare ajustabilă între 1 și 5 minute pentru a facilita ieșirea. Picioarele de montare decalate permit instalarea apropiată a mai multor variatoare, iar dispozitivul este livrat cu un întrerupător momentan (ON)-OFF-(ON).

Poziționare și Conformitate

Variatorul Deckhand 7506-BSS se poziționează ca o soluție versatilă de gestionare a iluminatului pentru circuitele marine de putere mică și medie. În gama Deckhand, acesta reprezintă varianta de 12 V CC cu cea mai mică putere (6 A), completată de modelele 7507 (12 A) și 7508 (25 A) pentru necesități superioare, precum și variante de 24 V CC (7504, 7509). Acest variator este conform cu normele de protecție împotriva aprinderii ISO 8846 și SAE J1171 și este marcat CE, garantând fiabilitatea și siguranța în mediu marin. Înlocuiește modelele anterioare 7501 sau 7502 ale mărcii, oferind o funcționalitate îmbunătățită, cu dimensiuni de 82,55 mm lățime și 88,9 mm înălțime.

Documentations

Type	Nom
	EN - Instructions - Deckhand Dimmer - 12V DC 6A
	EN - Deckhand Dimmer - Deckhand Dimmer - 12V DC 6A

Pièces de rechange

Interrupteur Contura SPDT noir ON-OFF-ON - Contura Switch SPDT Black ON-OFF-ON

Întrerupător Contura SPDT negru ON-OFF-ON

100,96 RON

100,96 RON ~~109,33 RON~~

Cumpără

Bouton-poussoir de réinitialisation uniquement. Disjoncteur à connexion rapide (10A) - Push Button Reset Only Quick Connect Circuit Breaker - 10 Amps

Buton de reset exclusiv. Siguranță termică cu conectare rapidă (10A)

43,59 RON

Cumpără

Disjoncteur à bascule plat série A - unipolaire 5A - A-Series Flat Rocker Circuit Breaker - Single Pole 5A

Intreruptor basculant plat serie A - unipolar 5 A

152,87 RON

152,87 RON ~~165,47 RON~~

Cumpără

Botte de disjoncteur à bouton-poussoir de réinitialisation Noir - Push Button Reset Only Circuit Breaker Boot - Black

Căciulă de siguranță cu buton de rearmare pentru disjunctor Negru

35,01 RON

Cumpără

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Variator Deckhand - 12 V CC 6 A

531,68 RON

531,68 RON ~~597,85 RON~~

Complétez votre installation avec des

Équipements complémentaires

Coupe-batterie à distance ML-RBS avec commande manuelle - 12V DC 500A - ML-RBS Remote Battery Switch with Manual Control - 12V DC 500A

Coupe-batterie à distance ML-RBS avec commande manuelle - 12V DC 500A - Wiring Diagram

Blue Sea Systems

Comutator de baterie la distanță ML-RBS cu comandă manuală - 12 V CC 500 A

Ref : 7700B-BSS

1.328,46 RON

1.328,46 RON ~~1.608,35 RON~~

Sélecteur de batterie e-Series 4 positions - Mounting Diagram

Blue Sea Systems

Selector baterie e-Series 4 poziții

Ref : 9001EB-BSS

342,30 RON

342,30 RON ~~382,79 RON~~

Blue Sea Systems

Ampermetru M2 DC

Ref : 1832-BSS

2.268,61 RON

2.268,61 RON ~~2.519,87 RON~~

Mini OLED DC Voltmeter - Yellow - Mini OLED DC Voltmeter - Yellow

Blue Sea Systems

Mini voltmetru CC OLED - Galben

Ref : 1733-BSS

286,38 RON

286,38 RON ~~348,42 RON~~

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - ML-ACR Automatic Charging Relay with Manual Control - 12V DC 500A

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - Wiring Diagram

Blue Sea Systems

Releu de încărcare automat ML-ACR cu control manual - 12 V CC 500 A

Ref : 7622B-BSS

1.327,17 RON

1.327,17 RON ~~1.958,70 RON~~

12/24V Dual USB 4.8A Chargers - Switch Mount - 12/24V Dual USB 4.8A Chargers - Switch Mount

Blue Sea Systems

Încărcătoare dublu USB 12/24 V 4,8 A - Pentru montare pe întrerupător

Ref : 1039-BSS

260,48 RON

260,48 RON ~~312,06 RON~~

Dash Socket 12V DC with Watertight Cap - Dash Socket 12V DC with Watertight Cap

Dash Socket 12V DC with Watertight Cap - Socket Dimensioned Drawing

Blue Sea Systems

Priza tablou de bord 12 V CC cu capac etanș

Ref : 1011-BSS

75,44 RON

75,44 RON ~~84,99 RON~~

Kit de conversion de panneau 360° - 12 à 24 V CC - 360 Panel Conversion Kit - 12 to 24V DC

Blue Sea Systems

Kit de conversie panou 360° - 12 la 24 V CC

Ref : 4113-BSS

57,10 RON

Alarme Floyd Bell Turbo Série - Floyd Bell Turbo Series Alarm

Blue Sea Systems

Alarma Floyd Bell Turbo Series

Ref : 1070B-BSS

158,23 RON

158,23 RON ~~189,11 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What type of lighting can the Deckhand 7506-BSS dimmer control?

The Deckhand 7506-BSS dimmer is designed to digitally control the brightness of unregulated LED lights, incandescent lights, and halogen lights.

What is the nominal operating voltage of this Blue Sea Systems variable speed drive?

This drive operates at a nominal voltage of 12 V DC.

What is the input voltage range accepted by the Deckhand 7506-BSS autopilot drive?

The Deckhand 7506-BSS drive can operate within a voltage range from 9 V to 16 V DC.

What is the maximum output current capacity of this dimmer?

The maximum output current capacity of the Deckhand 7506-BSS autopilot drive is 6 A.

What is the function of the built-in 'Bulb Saver' in the autopilot?

The 'Bulb Saver' function (bulb saver) is designed to prevent excessive aging of bulbs during the boat's electrical system charging phases.

Does the dimmer store the last brightness setting?

Yes, the Deckhand 7506-BSS autopilot has memory for the last brightness setting used.

What is the operating temperature range of this drive?

The inverter is designed to operate within a wide temperature range, from -40 °C to 85 °C.

What is the maximum leakage current of the device?

The maximum leakage current of the Deckhand 7506-BSS autopilot drive is less than 2 mA.

What type of brightness control is used by the Deckhand dimmer?

The drive uses continuous pulse-width modulation (PWM) control, allowing adjustment from 0 to 100% of the input voltage.

Is this autopilot supplied with a switch?

Yes, the throttle is supplied with a momentary switch (ON)-OFF-(ON).

What are the physical dimensions of the Deckhand 7506-BSS autopilot drive?

The dimensions of the Deckhand 7506-BSS variable frequency drive are:

Width: 3.25 inches (82.55 mm)Height: 3.5 inches (88.9 mm)

Is this variable frequency drive compliant with safety and regulatory standards?

Yes, the Deckhand 7506-BSS inverter is CE marked and compliant with the ignition protection requirements of ISO 8846 and SAE J1171.

Can I use this dimmer with LED lights that are already dimmed?

No, this dimmer is specifically designed to control the intensity of unregulated LED lights. It may not function correctly or could damage regulated LEDs.

Is this variable speed drive compatible with a 24 V DC electrical system?

No, model 7506-BSS is designed for 12 V DC systems. For 24 V DC systems, other Deckhand models are available, such as PN 7504 or 7509.

Can this dimmer be used with other types of bulbs than LED, incandescent or halogen?

The dimmer is specifically designed for unregulated LED, incandescent, and halogen lighting. Use with other types of bulbs is not guaranteed and may not function correctly.

How does the delayed backlight output function work?

The illuminated output function keeps the lights on for an adjustable duration after the dimmer is turned off. Here’s how to set it:

1-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash. The lights will stay on for 1 minute. 2-to-5-minute delay: After the first flash, hold the switch in the high (illuminated) position for 1 to 4 seconds. Release the switch after 2 to 5 flashes. The lights will stay on for 1 minute per flash, up to a maximum of 5 minutes.

Is it possible to install multiple Deckhand drives side by side?

Yes, the Deckhand 7506-BSS autopilot drive unit has offset mounting feet that allow installation of multiple units very close to each other.

Does the dimmer support multiple switch locations for brightness control?

Yes, the Deckhand 7506-BSS drive unit is designed to support multiple switch locations, providing installation flexibility.

How to adjust the delay for the backlighting function?

To set the delay for the illuminated output function:

For a 1-minute delay: Hold the switch in the high (illuminated) position for 2 seconds until the lights flash once. Release the switch.
For delays of 2 to 5 minutes: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash, then release the switch after the number of flashes corresponding to the desired number of minutes (e.g., 3 flashes for 3 minutes).

What are the main connections for installing the Deckhand drive?

The main connections of the Deckhand dimmer are as follows:

+12V DC (red): Positive power supply.Ground (black): Ground.Lamp (blue): Connection to lighting.Up Input (white): Input to increase brightness.Down Input (gray): Input to decrease brightness.A (ON)-OFF-(ON) switch is included for brightness control.