Faisceau alimentation vehicule Thales Iridium Certus

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 2%

Iridium

S24597

Cablu vehicul Power Harness 20FT

Câble véhicule Power Harness 20FT pour raccordement technique pour électronique marine, adapté aux installations Iridium. Longueur indiquée : 20 ft.

Prix publicBénéficier du tarif pro

1.541,84 RON

1.541,84 RON ~~1.574,86 RON~~

TTC Expediere calculată la momentul plății.

Stoc redus

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Segment cablu	Câbles constructeur marine
Tip cablu	Câble alimentation
Compatibility Scope	Référence exacte de l’équipement à vérifier avant commande
Marcă compatibilă	Iridium
Environment	Installation nautique
Installation Advice	prévoir un cheminement propre, sans tension mécanique sur les fiches
Installation Check	la référence constructeur, le connecteur et la longueur nécessaire à bord
Length	20 ft
Length Ft	20
Product Usage	Antenne et communications
Signal Type	Power
Skysat Usage	raccordement technique pour électronique marine

Description détaillée

Cablu vehicul Power Harness 20FT este un cablu de alimentare conceput pentru conectare tehnică la electronice marine. Completează o instalație existentă sau înlocuiește un cablu uzat, păstrând o referință compatibilă cu electronicele marine.

Fișa este atașată familiei Cabluri constructor marină. Lungime indicată: 20 ft. Semnal sau protocol: Power. Compatibilitatea trebuie confirmată cu echipamentul Iridium exact înainte de comandă.

Pentru o montare sigură, asigură-te că traseul este curat, fără tensiuni mecanice asupra conectorilor. Verifică și referința constructorului, tipul conectorului și lungimea necesară la bord înainte de a închide trecerile de cablu.

Avis de l'expert

Pol CONIN

Responsabil digital

« Skysat Review - Power Harness 20FT Vehicle Cable »

Skysat advice: select this cable starting from the device to be connected, not just the available length. Check the connector, pinout, and the actual routing inside the boat before ordering.

When the cable runs through the mast, roof, or wet area, leave a service loop, protect the connections, and avoid intermediate splices. This prevents many difficult diagnostics after installation.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Cablu vehicul Power Harness 20FT

1.541,84 RON

1.541,84 RON ~~1.574,86 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Câble véhicule Power Harness 20FT used for?

The Power Harness 20FT vehicle cable is used to ensure the following function: technical connection for marine electronics. It is intended for installations where you want to maintain a reference adapted to the equipment rather than an approximate cable.

Which equipment is it compatible with?

Compatibility depends on the exact model of the Iridium device. Before ordering, check the connector, pinout, and the documentation of the equipment to be connected.

What needs to be checked before installation?

Check the manufacturer reference, connector, and required length on board. Also plan for the actual cable routing, bulkhead penetrations, and service margins at the ends.

How to install it cleanly on board?

plan a clean routing path with no mechanical tension on the connectors. Connectors must not be under pull stress, and exposed joints must be protected from moisture.

Is the indicated length always sufficient?

The indicated length is 20 ft. Measure the actual passage inside the boat before ordering, adding the necessary margin for bends, drops, and service loops.

Why choose an OEM reference?

A manufacturer reference limits the risks of wiring errors, connector mismatches, or signal level issues. This is particularly important for Iridium links, radar, antenna, marine bus, or data connections.