Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

ObsolèteEpuizat

Navico

000-11148-001

DEPRECIAT - Suport antenă ZG100

Le support d'antenne Navico (réf. 000-11148-001) est une pièce de rechange officielle conçue pour la fixation des antennes GPS/compas B&G ZG100 et Simrad GS25. Il permet un montage rigide en surface ou sur mât standard, indispensable pour préserver la précision des données de cap et de position à 10 Hz. Ce produit inclut uniquement la base de montage de remplacement pour ces deux modèles spécifiques.

Prix publicBénéficier du tarif pro

156,76 RON

156,76 RON ~~194,54 RON~~

TTC Expediere calculată la momentul plății.

Stoc redus

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Culoare	Blanc
Modele compatibile	B&G ZG100, Simrad GS25, Lowrance Point-1
Finisare	Mat
Tipul instalației	Vissé
Conținut kit	Support de montage, Visserie
Material	Plastique de qualité marine
Tip de montaj	Montage en surface, Montage sur mât
Tipul produsului	Support de montage
Greutate	0.072

Accessoires

Antena GPS ZG100

1.489,06 RON

1.489,06 RON ~~1.899,68 RON~~

Cumpără

Antena GPS GS-25

1.533,27 RON

1.533,27 RON ~~1.899,68 RON~~

Cumpără

Description détaillée

Suportul de antenă 000-11148-001 este o piesă de instalare și de schimb original Navico, dezvoltată special pentru antenele GPS și busolele B&G ZG100 precum și echivalentele lor Simrad GS25. Acest element mecanic este indispensabil pentru asigurarea unei fixări rigide a senzorului de navigație, condiție esențială pentru exploatarea cu precizie înaltă a datelor de atitudine și poziționare.

O construcție adaptată senzorilor de înaltă frecvență

Antenele ZG100 și GS25 integrează un receptor GPS/GLONASS cu 32 de canale cuplat cu o busolă electronică, furnizând actualizări de poziție la 10 Hz și o precizie de cap de +/- 3°. Pentru ca pilotul automat și instrumentele NMEA 2000 să primească informații fiabile privind rata de girație și ruliul/pichetul (precise la +/- 1°), antena nu trebuie să sufere vibrații parazite. Acest suport original elimină jocurile mecanice care pot apărea cu fixări generice, garantând astfel stabilitatea absolută a senzorului, chiar și în condiții de mare agitată.

Opțiuni de montaj și integrare

Cu o greutate de doar 72 de grame, acest suport respectă formatul compact al antenei (90 mm diametru). Este proiectat pentru a oferi o flexibilitate totală de instalare pe punte sau pe portic. Structura sa permite atât montajul la nivel (flush mount) pentru o integrare discretă, cât și fixarea pe un catarg standard (pole mount) pentru a ridica antena și a optimiza recepția sateliților prin degajarea liniei de vizibilitate. Este piesa de schimb exactă furnizată la achiziția inițială a antenelor ZG100 și GS25.

Documentations

Type	Nom
	EN - Installation Guide - ZG100 Antenna Mount

Avis de l'expert

Pol CONIN

Responsabil digital

« The essential base for optimal heading accuracy »

A high-quality antenna mount is essential when using a combined GPS/compass sensor like the ZG100 or GS25. These antennas provide heading data with an accuracy of +/- 3° and a refresh rate of 10 Hz. Any vibration or play in the mount can introduce calculation errors for the autopilot. This original Navico mount ensures absolute rigidity, whether installed on a surface or a standard mast, guaranteeing accurate transmission of attitude data (roll/pitch to +/- 1°) over the NMEA 2000 network.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

DEPRECIAT - Suport antenă ZG100

156,76 RON

156,76 RON ~~194,54 RON~~

Complétez votre installation avec des

Équipements complémentaires

Navico

Calculator automat pilot NAC-3

Ref : 000-13250-001

8.060,19 RON

8.060,19 RON ~~11.227,80 RON~~

B&G Traceur de carte Zeus S 7" - photo 2

B&G

Plotter cartografic Zeus S 7"

Ref : 000-15217-001

5.153,36 RON

5.153,36 RON ~~6.802,38 RON~~

NAC-2 Calculateur de pilote automatique Simrad - 000-13249-001 - Nauti Boutique

Navico

Calculator pilot automat NAC-2

Ref : 000-13249-001

5.167,56 RON

5.167,56 RON ~~6.393,53 RON~~

Simrad

Simrad NSX 3012 12"

Ref : 000-15223-001

14.814,07 RON

14.814,07 RON ~~17.826,27 RON~~

Lowrance

Traceur Elite FS 7

Ref : 000-15702-001

4.600,72 RON

4.600,72 RON ~~5.505,46 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

Which antennas are compatible with this mount?

This mount is specifically designed as an OEM part for the following GPS and compass antennas:

B&G ZG100Simrad GS25It ensures a perfect fit for these models.

Can I use this mount for my Lowrance Point-1 antenna?

Yes, although primarily marketed for the B&G ZG100 and Simrad GS25 models, this mount is also compatible with the Lowrance Point-1 antenna, as all three models share the same base and mounting format.

Is it possible to use this mount for an antenna from another brand such as Garmin or Raymarine?

No, this is not recommended. This mount is molded and designed specifically for the dimensions and mounting points of Navico antennas (B&G ZG100, Simrad GS25). Using an unsuitable mount would compromise the antenna's stability and data accuracy.

Is this mount an original manufacturer part?

Yes, this is an original Navico installation and spare part. It guarantees a perfect fit and durability in line with the brand's standards.

What types of mounting are possible with this bracket?

This mount is versatile and allows two types of installation on your vessel:

Surface mounting (flush mount): for a discreet integration directly on the deck or roof.Pole mounting (pole mount): for installation on a standard antenna mast support to elevate the antenna and optimize satellite reception.

Why is it so important to use this official mount for my antenna?

Using the official mount is critical to ensure the absolute stability of your ZG100 or GS25 antenna. These sensors provide high-frequency data (10 Hz) on heading, yaw rate, roll, and pitch. Any vibration or mechanical play, common with generic fasteners, can distort this data and degrade the performance of your autopilot and instruments.

Does the mount design account for the antenna cable routing?

Yes, the mount is designed to allow clean and protected routing of the NMEA 2000 cable from the antenna, whether for surface or mast mounting, ensuring a tidy installation.

Is this mount identical to the one originally supplied with the new antenna?

Yes, absolutely. This is the exact replacement part supplied in the box when purchasing a new B&G ZG100 or Simrad GS25 antenna.

What is the manufacturer reference for this product?

The manufacturer reference (SKU or part number) for this antenna mount is 000-11148-001.

Are special tools required to install this mount?

No, no special tools are required. Installation only needs basic tools such as a screwdriver and a drill for mounting holes on your boat. The choice of drill bits and bits will depend on the screws you select based on your mounting surface.

Is it possible to mount the antenna directly on the deck without this bracket?

No, the ZG100 or GS25 antenna cannot be properly installed without this mount. The mount is the essential interface part that ensures stable and secure mechanical attachment between the antenna base and the boat surface.

What is the main function of this antenna mount?

The primary function of this mount is to ensure a rigid and vibration-free attachment of the GPS/compass antenna. This stability is essential for the sensor to provide navigation data (position, heading, attitude) of extreme precision to your instruments and autopilot.

Is the mount designed for installation on a standard antenna mast?

Yes, the mount is designed for attachment to a standard marine antenna mast. This raises the antenna to clear the line of sight to satellites and thus improve GPS signal quality.

What are the dimensions of the antenna this mount can accommodate?

This mount is designed for antennas with a base diameter of 90 mm (3.54 inches), which precisely matches the dimensions of the B&G ZG100 and Simrad GS25 models.