Airmar R111LH - Sonde bain d’huile 2kW CHIRP (38-75kHz / 130-210kHz) + température – (Fils nus) - Garmin

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 21%

Garmin

010-11643-20

Airmar R111LH - Sondă baie de ulei 2kW CHIRP (38-75kHz / 130-210kHz) + temperatură – (Fire goale)

La sonde Garmin Airmar R111LH est un transducteur CHIRP 2 kW double bande (38-75kHz / 130-210kHz) avec fonction profondeur et température, conçu pour une installation en bain d'huile sur coques en fibre de verre solides. Elle offre une détection ciblée jusqu'à 1829m (6000 pieds) en basse fréquence et 457m (1500 pieds) en haute fréquence sans percer la coque, idéale pour la pêche hauturière et les bateaux rapides. Ce modèle est livré avec son réservoir de montage plastique, un joint, quatre boulons à tête hexagonale avec rondelles de blocage, et un câble de 15m à fils nus.

Prix publicBénéficier du tarif pro

19.150,08 RON

19.150,08 RON ~~24.432,24 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tehnologii de sondeu suportate	CHIRP
Tensiune de funcționare	Alimenté par module sondeur
Frecvențe sonar	38-75, 130-210
Temperatură de funcționare	-10 à 60
Putere de vârf	2000.0
Tip conector sonar	Fils nus
Lungimea cablului	10.0
Afișaje compatibile	Module sondeur Garmin GSD 26; Afficheurs multifonctions Garmin GPSMAP séries 4xxx, 5xxx, 6xxx, 7xxx, 8xxx, 74xx, 76xx (via GSD 26)
Lățimea produsului	225
Înălțimea produsului	231
Adâncime produs	436
Compatibilitate magistrală	Propriétaire (Airmar Xducer ID®)
Rețea cablată	Fils nus (vers module sondeur)
Conectivitate wireless	Non
Tip de montaj	Bain d'huile
Certificări	CE
Domeniu de măsurare temperatură	-10 à 60 °C
Adâncime maximă de citire	1829.0
Material sondă	Plastique
Senzor de temperatură integrat	Oui
Active Area Cm2	144.6
Unghi de acoperire al fasciculului	5-19
Beam Width At 38khz 3db	10 (Avant-arrière) / 19 (Bâbord-tribord)
Beam Width At 75khz 3db	5 (Avant-arrière) / 10 (Bâbord-tribord)
Beam Width High Frequency 3db	De 8° à 4°
Frecvență CHIRP înaltă	130-210
Frecvență CHIRP joasă	38-75
Deadrise Angle Compatibility	Jusqu'à 12° (côté long) / 22° (côté court)
Tip de pescuit	Mer
Material carcasă	Nylon
Hull Material Compatibility	Fibre de verre solide
Senzor de viteză integrat	Non
Q Factor	2.5
Radiating Surface Material	Uréthane
Anul lansării	2020.0
Tank Liquid Type	Propylène glycol (antigel marin/RV non toxique)
Nivel utilizator	Expert
Garantie	2.0

Accessoires

Kit prize RJ45 (set de 2)

72,98 RON

72,98 RON ~~81,02 RON~~

Cumpără

Cablu rețea marin BlueNet 6m

189,97 RON

189,97 RON ~~243,22 RON~~

Cumpără

Description détaillée

Concepută pentru profesioniștii în pescuit și pentru amatorii de navigație exigentă, sonda Airmar R111LH de la Garmin este un transductor CHIRP dublu bandă de 2 kW, optimizat pentru carenele solide din fibră de sticlă. Oferă capacități de detectare a adâncimii și a temperaturii apei, fără a necesita găurirea carenei datorită instalării în baie de ulei sau montaj "pocket".

Performanțe CHIRP Avansate

R111LH funcționează pe două game de frecvențe CHIRP distincte: o frecvență joasă de 38 până la 75 kHz și o frecvență înaltă de 130 până la 210 kHz. Acoperirea extinsă, totalizând 117 kHz lățime de bandă, permite o detectare îmbunătățită a țintelor, o discriminare precisă a fundului și o separare clară între peștii momeală și peștii de sport. Cu o putere de 2 kW, sonda atinge adâncimi maxime de 1829 metri (6000 picioare) în frecvență joasă și de 457 metri (1500 picioare) în frecvență înaltă. Deși unele surse menționează o adâncime maximă generală de 2438 metri (8000 picioare) pentru transductoarele de 2kW, performanțele specifice sunt cele indicate pe bandă de frecvență. Lățimile de fascicul variază de la 19° la 10° (babord-tribord) și de la 10° la 5° (prora-pupă) în frecvență joasă, și de la 8° la 4° în frecvență înaltă, asigurând o acoperire adaptată diferitelor adâncimi și scenarii de pescuit.

Instalare și Compatibilitate

Acest transductor este proiectat special pentru carenele solide din fibră de sticlă, excluzând carenele cu miez (spumă sau balsa). Instalarea în baie de ulei este facilitată de un rezervor din plastic care poate fi ajustat pentru a compensa un unghi de deriva al carenei de până la 22° pe latura scurtă și 12° pe latura lungă. Această metodă de instalare este deosebit de avantajoasă pentru bărcile rapide, multicoaste sau ambarcațiunile remorcabile, deoarece păstrează integritatea carenei și reduce rezistența hidrodinamică. R111LH este compatibilă cu diverse sisteme de propulsie, inclusiv motoare in-board, I/O, exterior și jet-drive. Livrată cu un cablu de 15 metri (49 picioare) cu fire goale, este gata de integrare cu module sonar compatibile precum Garmin GSD 26, exploatând pe deplin tehnologia Xducer ID® de la Airmar.

Documentations

Type	Nom
	Installation Guide - Airmar In-Hull 2-3kW CHIRP Transducer Installation Instructions
	Installation notice - Installation supplement for Airmar CHIRP transducers
	Technical Drawing - Airmar R599 / R111 Sonar Technical Drawing
	Technical Reference - Airmar CHIRP 38-75 / 130-210 kHz Depth Sounder Specifications
	Technical Brochure - Airmar CHIRP In-Hull Transducers
	Wiring diagram - Airmar transducer wiring diagram
	Wiring diagram - Airmar transducer wiring diagram

Avis de l'expert

Pol CONIN

Responsabil digital

« Airmar R111LH: 2kW CHIRP option without drilling for solid hulls »

The Airmar R111LH transducer is a relevant solution for fiberglass vessels whose owners want 2 kW CHIRP detection capability without compromising hull structural integrity. Its oil-bath installation is a major advantage, particularly for high-speed boats where the drag of a through-hull transducer could be a limiting factor, or for multihulls and towable units where the simplicity of non-drilling installation is appreciated.

This model positions itself as an alternative to through-hull transducers of equivalent power (e.g., Airmar R109LH), offering unique installation flexibility. It is essential to ensure the hull is solid fiberglass, without balsa or foam core, as transmission through non-homogeneous composite materials would significantly degrade acoustic performance. The chosen location must be free of turbulence, away from propellers and water intakes, and in a well-ventilated area to prevent overheating of the propylene glycol in the reservoir, which could impact long-term reliability.

Bare-wire cabling requires expert integration with a compatible fishfinder module, such as the Garmin GSD 26, to fully utilize CHIRP low- and high-frequency capabilities. While offering impressive deep detection performance (up to 1829m at low frequency), there is a slight signal attenuation compared to a directly immersed transducer. However, for many sport and commercial fishing applications in offshore waters, this drawback is largely outweighed by the ease of installation and hull preservation.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Airmar R111LH - Sondă baie de ulei 2kW CHIRP (38-75kHz / 130-210kHz) + temperatură – (Fire goale)

19.150,08 RON

19.150,08 RON ~~24.432,24 RON~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

Carcasă Black Box GPSMAP® 8700

Ref : 010-02094-00

20.503,58 RON

20.503,58 RON ~~27.027,39 RON~~

Garmin

GPSMAP® 723xsv - combinat GPS-sondeu 7" cu cartografie mondială

Ref : 010-02365-02

5.465,37 RON

5.465,37 RON ~~6.806,91 RON~~

Garmin

GPSMAP® 923xsv - combinație GPS-sondă 9" cu hartă mondială

Ref : 010-02366-02

7.728,57 RON

7.728,57 RON ~~9.672,31 RON~~

Garmin

GPSMAP® 1223xsv - combinat GPS-ecograf 12" cu hartă mondială

Ref : 010-02367-02

13.366,91 RON

13.366,91 RON ~~17.619,96 RON~~

Garmin

GPSMAP® 9010xsv - combina GPS-sondeu 10" premium

Ref : 010-03175-02

18.974,96 RON

18.974,96 RON ~~21.626,20 RON~~

Garmin

GPSMAP® 9013xsv - combinat GPS-sondeu 13" premium

Ref : 010-03176-02

25.008,53 RON

25.008,53 RON ~~29.736,05 RON~~

Garmin

GPSMAP® 9017xsv - combinat GPS-ecou sonor 17" de înaltă calitate

Ref : 010-03177-02

36.746,02 RON

36.746,02 RON ~~43.793,15 RON~~

Garmin

GPSMAP® 8410 - ecran traceur 10" cu hartă mondială

Ref : 010-02091-00

12.096,15 RON

12.096,15 RON ~~15.889,95 RON~~

Garmin

GPSMAP® 8416xsv - combinat GPS-ecou 16"

Ref : 010-02093-02

28.401,16 RON

28.401,16 RON ~~36.921,41 RON~~

Garmin

GPSMAP® 8410xsv - combinat GPS-ecograf 10"

Ref : 010-02091-02

13.235,23 RON

13.235,23 RON ~~17.025,33 RON~~

Garmin

GPSMAP® 8412xsv - combinat GPS-ecou

Ref : 010-02092-02

20.051,31 RON

20.051,31 RON ~~24.972,98 RON~~

Garmin

GPSMAP® 8416 - ecran traceur 16"

Ref : 010-02093-00

26.105,68 RON

26.105,68 RON ~~34.056,02 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What are the main features of the Airmar R111LH depth sounder?

The Airmar R111LH transducer is a 2 kW dual-band CHIRP depth and water temperature sounder. It operates on low frequencies from 38 to 75 kHz and high frequencies from 130 to 210 kHz, providing an extended coverage of 117 kHz bandwidth. Installation is done via oil-bath or "pocket" mounting. It is optimized for solid fiberglass hulls.

Which CHIRP frequencies does the Airmar R111LH transducer use?

The Airmar R111LH transducer uses two distinct CHIRP frequency ranges:

A low frequency from 38 to 75 kHz.A high frequency from 130 to 210 kHz.This full coverage provides a total bandwidth of 117 kHz.

Can the Airmar R111LH transducer measure water temperature?

Yes, the Airmar R111LH transducer is equipped to detect water temperature in addition to depth.

What is the maximum detection depth of the R111LH depth sounder?

The R111LH transducer can reach maximum depths of:

1829 metres (6000 feet) at low frequency (38-75 kHz). 457 metres (1500 feet) at high frequency (130-210 kHz).

What is dual-band CHIRP and what are its advantages for this fishfinder?

The dual-band CHIRP means the sounder operates on two distinct frequency ranges (low and high) simultaneously or alternately. For the R111LH, this extended coverage of 117 kHz bandwidth provides improved target detection, more precise seabed discrimination, and clear separation between baitfish and gamefish.

What are the beam widths of the Airmar R111LH transducer?

The Airmar R111LH transducer beam widths vary depending on frequency:

At low frequency (38–75 kHz): from 19° to 10° (port–starboard) and from 10° to 5° (bow–stern). At high frequency (130–210 kHz): from 8° to 4°.

Is the Airmar R111LH transducer suitable for detecting baitfish and gamefish?

Yes, thanks to its advanced CHIRP performance and wide bandwidth, the Airmar R111LH fishfinder provides excellent seabed discrimination and clear separation between baitfish and gamefish.

Which hull type is compatible with the installation of the Airmar R111LH transducer?

The Airmar R111LH transducer is designed for solid fiberglass hulls only. It cannot effectively transmit through cored materials such as foam or balsa wood.

How is the Airmar R111LH transducer installed on the boat?

The Airmar R111LH transducer is designed for an "in-hull" installation (inside the hull), specifically in an oil-filled or "pocket" mount. For the oil-filled mount, it is placed in a reservoir filled with propylene glycol, secured inside the hull.

Is it necessary to drill the hull to install the R111LH oil-bath transducer?

No, the Airmar R111LH transducer does not require hull drilling for in-hull (in-bath) installation. It is mounted inside the hull in a liquid-filled tank.

What precautions should be taken when choosing the installation location for the depth sounder?

When choosing the location, ensure that:

The fiberglass hull is solid (no air bubbles or core materials).The area under the transducer will always be in contact with water.The water flow under the hull is as smooth as possible, with minimal bubbles and turbulence.The transducer beam will not be blocked by the keel or propeller shafts.The location is away from interference sources (propellers, other machinery, other sounders, cables).The area is cool and well-ventilated, away from the engine compartment to prevent overheating of the liquid.

Which oil should be used for the oil bath of the Airmar R111LH depth sounder?

For the oil bath, it is recommended to use propylene glycol. It is a non-toxic antifreeze/coolant suitable for marine applications and recreational vehicles (RV).

What is the maximum deadrise angle acceptable for installing the Airmar R111LH transducer?

The maximum acceptable deadrise angle for installing the Airmar R111LH transducer is 12° on the long side of the tank and 22° on the short side of the tank.

Which materials are recommended for securing the depth sounder transducer to the hull?

To secure the depth sounder transducer to the hull, recommended bonding materials include fiberglass resin (such as Bondo 401 or West Marine #1937762), Marine-Tex epoxy putty, or 3M™ Marine 5200 adhesive/sealant.

Can the Airmar R111LH transducer overheat if not installed correctly?

Yes, CHIRP transducers like the R111LH generate more heat than traditional transducers. Incorrect installation, particularly in a hot area such as the engine compartment, or if the transducer is not fully immersed in liquid, can lead to overheating and probe failure. The liquid temperature in the tank must not exceed 60°C (140°F).

Is the Airmar R111LH depth sounder transducer cable pre-terminated or does it come with bare wires?

The Airmar R111LH transducer is supplied with bare wires. This means it has no pre-installed connector and requires proper wiring and termination to connect to your equipment.

Is this transducer recommended for high-speed boats?

Yes, the Airmar R111LH transducer is recommended for high-speed boats, provided it is installed in an area where the water flow under the hull is as smooth as possible, with minimal bubbles and turbulence.