Compas satellite marin MSC™ 10, Compas électronique et récepteur GPS multibande, blanc - Garmin image 1

Compas satellite marin MSC™ 10, Compas électronique et récepteur GPS multibande, blanc - Garmin image 2

Compas satellite marin MSC™ 10, Compas électronique et récepteur GPS multibande, blanc - Garmin image 3

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 22%

Garmin

010-02407-00

Compas satelit marin MSC™ 10, compas electronic și receptor GPS multibandă, alb

Le Garmin Compas satellite marin MSC 10 est un capteur de cap et récepteur GPS multibande (L1/L5) avec AHRS intégré, offrant une précision de cap de 2 degrés RMS et une position sub-métrique. Cette solution technique avancée améliore la navigation et la performance des pilotes automatiques Garmin Reactor.

Appartenant à la gamme MSC, le MSC 10 est un produit actuel et non obsolète. Il est livré avec un câble drop NMEA 2000 de 6 m, un connecteur en T, un joint et le matériel de montage nécessaire.

Prix publicBénéficier du tarif pro

4.419,37 RON

4.419,37 RON ~~5.671,53 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Ahrs Integrated	Oui
Gnss Bands	L1 et L5
Constelații GNSS suportate	GPS, Galileo, GLONASS, BeiDou
Gnss Multiband	Oui
Gnss Receiver Type	Multibande multi-constellations
Heave Accuracy Rms	8
Installation Sealant Recommended	Oui
Magnetic Compass Backup	Oui
Mounting Location Guidelines	Vue dégagée du ciel et de l'horizon, Loin des interférences électromagnétiques (EMI), Loin des objets métalliques ferreux, Au-dessus du chemin du radar (si possible), À plus de 1m d'une antenne VHF, Non ombragé par la superstructure, Non monté à l'intérieur des cabines, Pas directement dans le chemin du radar
Pole Mount Cable Hole Diameter	19
Pole Mount Material Recommendation	Acier inoxydable
Pole Mount Thread Spec	1 pouce OD, 14 filets par pouce
Pole Outer Diameter Compatibility	1
Position Accuracy 95 Percent	3
Position Accuracy Cep	1
Surface Mount Cable Hole Diameter	25
Surface Mount Max Thickness	5 à 30
Surface Mount Screw Hole Diameter	5
Surface Mount Threaded Rod Size	M4 x 0.07 x 45
Surface Mount Torque Range	13.7 à 18.6

Description détaillée

Conceput pentru navigația marină exigentă, Garmin Compas satelit marin MSC™ 10 este un senzor de cap bazat pe GPS și un receptor GPS multibandă. Furnizează informații de cap, poziție, tangaj, ruliu și înălțime a valurilor cu o precizie ridicată pentru sistemele de bord. Spre deosebire de compasurile magnetice tradiționale, MSC 10 nu este afectat de interferențele magnetice, asigurând o fiabilitate constantă a capului. Se deosebește de simplii receptori GPS prin capacitatea sa de a furniza un cap real chiar și la oprire sau la viteză redusă, datorită AHRS-ului integrat.

Precizie și performanțe tehnice

MSC 10 integrează un receptor GNSS multibandă (L1 și L5) și multi-constelații, compatibil cu sistemele GPS, Galileo, GLONASS și BeiDou. Această arhitectură avansată garantează o precizie a capului de 2° RMS și o precizie a poziției sub 1 metru CEP (sub 3 metri pentru 95% din timp în condiții marine tipice). Viteza de actualizare a poziției de 10 Hz permite o urmărire dinamică. Precizia de înălțime a valurilor de 8 cm RMS este un avantaj pentru stabilitatea datelor. AHRS-ul integrat asigură un cap GPS stabil la orice viteză, inclusiv în condiții de valuri mari sau viraje strânse. Acest dispozitiv este un senzor principal ideal pentru piloții automati, precum seria Garmin Reactor, unde îmbunătățește precizia și coerența capului pentru o navigație mai eficientă și economii de combustibil. Contribuie și la trasarea mai precisă a radarului atunci când este asociat cu un radar compatibil.

Integrare și flexibilitate de instalare

Cu compatibilitatea NMEA 2000, Garmin MSC 10 se integrează ușor într-o rețea de bord existentă, transmitând direct datele de cap, tangaj, ruliu și înălțime a valurilor către ploterele cartografice Garmin compatibile. Dispozitivul poate fi montat pe o suprafață plană sau pe un catarg standard cu diametrul exterior de 1 inch și un pas de 14 filete pe inch (catargul nu este inclus). Este necesară o vedere clară a cerului și a orizontului pentru performanțe optime. Pentru situațiile în care semnalul GPS ar putea fi slab sau blocat (sub poduri, lângă structuri înalte), MSC 10 dispune de un magnetometru intern utilizabil ca senzor de rezervă, necesitând o calibrare prealabilă. Instalarea este facilitată de furnizarea unui cablu drop NMEA 2000 de 6 m, a unui conector în T, a unei garnituri și a materialului de montaj (tije filetate M4 x 0,07 x 45, șaibe, piulițe hexagonale). Adezivul este de asemenea inclus pentru montajul pe catarg.

Documentations

Type	Nom
	Notice d'installation - Instructions d'installation Compas satellite marin MSC 10 (EN)
	Gabarit de montage - Gabarit de montage Compas satellite marin MSC 10 (EN)
	Reference technique - Référence technique pour produits Garmin NMEA 2000 (EN)

Avis de l'expert

Pol CONIN

Responsabil digital

« Analysis of the Garmin MSC 10 satellite compass: heading accuracy and AHRS integration »

The Garmin MSC 10 marine satellite compass is an advanced technical solution for vessels requiring heading and position accuracy superior to traditional fluxgate compasses. Its practical value is particularly high for racing sailboats and high-performance powerboats, where heading stability is critical for autopilot efficiency and the reliability of navigation and radar detection systems.

This model stands out with its multi-band GNSS receiver (L1 and L5) and multi-constellation capability, providing enhanced signal robustness and sub-meter positioning accuracy, even in complex environments. The integration of the AHRS (Attitude Heading Reference System) is a major asset, enabling the MSC 10 to deliver a stable and consistent heading, including at very low speeds or when stationary, where a standard GPS providing COG (Course Over Ground) would be insufficient. This capability is essential for dynamic positioning systems and chart stabilization.

From an installation perspective, the flexibility of surface or mast mounting (1" OD) is appreciated, though careful attention must be given to selecting a location with a clear 360° view of the sky and horizon. The backup magnetic compass function, while requiring calibration and interference checks, adds a useful layer of redundancy. However, it is imperative to understand that magnetic heading accuracy will always be lower than satellite heading accuracy, and it should only be considered as a fallback solution. For optimal performance, the GPS mode remains the standard. NMEA 2000 integration is standard and greatly simplifies interfacing with other Garmin or third-party equipment.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Compas satelit marin MSC™ 10, compas electronic și receptor GPS multibandă, alb

4.419,37 RON

4.419,37 RON ~~5.671,53 RON~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8410 - ecran traceur 10" cu hartă mondială

Ref : 010-02091-00

12.096,15 RON

12.096,15 RON ~~15.889,95 RON~~

Garmin

GPSMAP® 8416xsv - combinat GPS-ecou 16"

Ref : 010-02093-02

28.401,16 RON

28.401,16 RON ~~36.921,41 RON~~

Garmin

Set standard de direcție electronică Reactor 40™ fără GHC™ 20

Ref : 010-00705-90

10.647,31 RON

10.647,31 RON ~~12.970,40 RON~~

Garmin

GHC™ 50 Instrument pentru pilot automat marin

Ref : 010-02731-00

3.482,22 RON

3.482,22 RON ~~4.590,20 RON~~

Garmin

Cofret Reactor™ 40 pentru direcții electronice cu instrument GHC™ 50

Ref : 010-02794-03

12.866,43 RON

12.866,43 RON ~~15.673,60 RON~~

Garmin

Afișaj multifuncțional GMI 20 - 4''

Ref : 010-01140-00

2.562,93 RON

2.562,93 RON ~~3.238,58 RON~~

Garmin

Transponder AIS 800 emițător-receptor

Ref : 010-02087-00

5.332,02 RON

5.332,02 RON ~~7.028,52 RON~~

Garmin

Radiotelefon VHF marin 315i

Ref : 010-02047-01

3.677,99 RON

3.677,99 RON ~~4.536,16 RON~~

Garmin

Sondă traversantă GDT™ 43 (adâncime/temperatură) și adaptor NMEA 2000

Ref : 010-01749-10

1.371,46 RON

1.371,46 RON ~~1.724,65 RON~~

Europa Centrală și de Vest - Hărți marine

Garmin

Europa Centrală și de Vest - Hărți marine

Ref : 010-C1354-30

1.205,46 RON

1.205,46 RON ~~1.351,62 RON~~

Garmin

Cutie Reactor™ 40 pentru Yamaha® Helm Master® cu instrument GHC™ 50

Ref : 010-02794-04

15.076,23 RON

15.076,23 RON ~~19.187,94 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What navigation information does the Garmin MSC 10 satellite compass provide?

The Garmin MSC 10 satellite compass is a heading sensor based on GPS and a multi-band GPS receiver. It provides heading, position, heave, pitch, and roll data with high accuracy for onboard systems.

What is the heading and position accuracy provided by the MSC 10?

The MSC 10 provides a heading accuracy of 2 degrees RMS. Its position accuracy is less than 1 meter CEP (less than 3 meters for 95% of the time in typical marine use).

Is the MSC 10 compass sensitive to magnetic interference?

No, unlike traditional magnetic compasses, the MSC 10 satellite compass is not affected by magnetic interference, ensuring consistent heading reliability.

Can the MSC 10 maintain a precise heading even when stopped or at low speed?

Yes, thanks to its integrated AHRS (Attitude Heading Reference System), the MSC 10 can provide a stable GPS heading at all speeds, including when stationary or at low speed, as well as during heavy pitching in rough seas or tight turns.

Which GNSS systems are supported by the MSC 10 multiband receiver?

The MSC 10 integrates a multi-band GNSS receiver (L1 and L5) and multi-constellation, supporting GPS, Galileo, GLONASS, and BeiDou systems.

What is the update frequency of the MSC 10 compass position?

The MSC 10 compass position update rate is 10 Hz, enabling precise dynamic tracking.

What is the heave accuracy of the MSC 10?

The MSC 10 provides a heave accuracy of 8 cm RMS, which is an asset for data stability.

Is it necessary to have an NMEA 2000 network to install the MSC 10 compass?

Yes, the MSC 10 compass provides heading data to your existing NMEA 2000 network. If your boat does not have one, you will need to install one.

What are the important considerations for choosing the mounting location for the MSC 10 compass?

For optimal performance, the compass must have an unobstructed view of the sky and horizon in all directions. It must not be mounted in the shadow of the boat’s superstructure, a radome antenna, or the mast. Avoid mounting it inside or near cabins, close to the engine, or other sources of electromagnetic interference (EMI). If a radar is present, it should be mounted above the radar’s beam path if possible, and more than 1 meter (3 feet) away from a VHF radio antenna.

Can the MSC 10 compass be mounted on a flat surface or on a mast?

Yes, the MSC 10 compass can be mounted on a flat surface or fixed to a standard 1-inch diameter stainless steel threaded mast with 14 threads per inch (mast not included). The cable can be routed inside or outside the mast.

What tools are required for installing the MSC 10 compass?

Required tools include:

A drillA 19 mm (3/4 in) bit for the mast cable holeA 5 mm (3/16 in) bit for surface-mount screw holesA 25 mm (1 in) hole saw for the surface-mount cable holeA #2 Phillips screwdriverA 35 mm (1 3/8 in) wrenchA torque wrench with a 7 mm (9/32 in) socketAdditional NMEA 2000 network components if requiredMarine sealant (optional)

Is it mandatory to calibrate the MSC 10 compass after installation?

The heading based on GPS signals does not require calibration. However, the MSC 10 includes an internal magnetic compass that can be used as a backup to avoid loss of heading data in areas where GPS signals are blocked or weak (under bridges, near tall structures, in covered docks). Calibration of this backup magnetic compass is highly recommended if you plan to use it.

What should I do if I don't have a Garmin chartplotter for calibrating the backup magnetic compass?

If you do not have a Garmin chartplotter connected to the NMEA 2000 network or if you are connected to a third-party display, you will need to use the basic calibration procedure. This procedure involves navigating the boat in slow, tight circles in a calm, open water area.

Which items are included in the package for NMEA 2000 compass connection?

The compass comes with a NMEA 2000 T-connector and a 6-metre (20-foot) NMEA 2000 drop cable. These two components are used to connect the compass to your existing NMEA 2000 network.

Is the MSC 10 compass compatible with existing NMEA 2000 networks?

Yes, the MSC 10 compass is designed to connect to an existing NMEA 2000 network and provides heading data to that network. It uses NMEA 2000 micro connectors compatible with other NMEA 2000 components.

What is the required supply voltage for the NMEA 2000 network to which the MSC 10 is connected?

The NMEA 2000 network must be powered by a 12 V direct current source (12 Vdc). NMEA 2000 devices must operate between 9 and 16 Vdc.

Can I use the MSC-10 with displays or navigation systems from other brands?

Yes, the MSC 10 can be connected to an NMEA 2000 network and operate with third-party displays or navigation systems. For calibrating the backup magnetic compass with a third-party device, a basic calibration procedure is available.

Is the MSC 10 compass compatible with Garmin chartplotters for calibration?

Yes, if the MSC 10 compass is connected to the same NMEA 2000 network as a compatible Garmin chartplotter, you can perform a calibration procedure based on the menu via the chartplotter's interface for the backup magnetic compass.

What is the maximum length of an NMEA 2000 drop cable to connect the MSC 10?

An NMEA 2000 drop cable, such as the one included with the MSC 10, is limited to a maximum length of 6 meters (20 feet).

Can the MSC 10 compass power a NMEA 2000 network?

No, the MSC 10 compass is a device that connects to the NMEA 2000 network and draws its power from it. The NMEA 2000 network must be powered by a dedicated power cable, typically connected to a 12 Vdc source via a switch.