ECLIPSE SL100, Strip Light, Blue, 2.5m - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 7%

Garmin

010-04478-00

ECLIPSE SL100, bandă luminoasă albastră, 2,5 m

Conçue pour l'éclairage décoratif et indirect, la bande lumineuse Garmin ECLIPSE SL100 bleue de 2,5 mètres est une solution flexible et étanche (IP68) pour tout bateau 12V DC. Résistante aux UV et entièrement encapsulée, elle s'installe facilement en intérieur comme en extérieur. Les clips de fixation à visser sont inclus pour une installation sécurisée.

Prix publicBénéficier du tarif pro

399,26 RON

399,26 RON ~~432,27 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Bande lumineuse
Tensiune de funcționare	12
Consum electric tipic	12.5
Culoare lumină	Bleu
Indice IP	IP68
Variator compatibil	Oui
Lungime bandă	2.5
Densitate LED-uri / metru	60.0
Spate adeziv	Oui
Bend Axis	Vertical
Current Consumption Per Meter	0.41
Rază de curbură minimă	50
Interval de tensiune de funcționare	10-15
Consum electric pe metru	5
Tip alimentare	DC
Recommended Installation Environment	Intérieur et extérieur (zones humides)
Strip Thickness	5.2
Strip Width	12.0
Rezistență UV	Oui

Description détaillée

Banda luminoasă ECLIPSE SL100 de la Garmin, în varianta sa albastră de 2,5 metri (referință 010-04478-00), este o soluție de iluminat marin flexibilă, concepută pentru o integrare discretă. Oferă iluminat decorativ și indirect, ideal pentru gurnele, sub mobilier sau în spatele panourilor de plafon. Acest model monocrom albastru se deosebește de variantele bicolore (albastru și alb) sau RGB din gama ECLIPSE, care necesită utilizarea unui ECLIPSE Command Center pentru gestionarea completă a culorilor și efectelor. ECLIPSE SL100 albastră este poziționată pentru aplicații care necesită o lumină de accent simplă și eficientă.

Concepție și Specificații Tehnice

Fabricată din materiale rezistente la UV și complet încapsulată, banda luminoasă ECLIPSE SL100 este adaptată pentru medii marine interioare și exterioare, cu o clasificare IP68 care asigură protecție împotriva prafului și imersiunii temporare, deși nu este proiectată pentru imersiune permanentă. Integrează 60 LED-uri pe metru și funcționează exclusiv pe sisteme de 12V CC, cu o plajă de tensiune de 10 până la 15V CC. Consumul său tipic este de 5 wați pe metru, adică un curent de 0,41A la 12V pe metru. Alte lungimi, precum 1 metru și 5 metri, sunt disponibile și în aceeași gamă pentru a se adapta diferitelor nevoi de instalare.

Instalare și Flexibilitate

Cu dimensiunile de 10,8 mm înălțime și 5,2 mm adâncime, această bandă luminoasă oferă o flexibilitate minimă de îndoire de 50 mm pe axa verticală, evitând orice torsiune sau îndoire pe axa orizontală. Instalarea poate fi realizată prin tăierea la lungimea dorită, capătul tăiat trebuind să fie sigilat cu siliconul furnizat. Montajul se realizează cu ajutorul benzilor adezive 3M și/sau a clipsurilor pentru înșurubare furnizate, pentru o fixare mecanică consolidată, recomandată în special în exterior sau în zone umede. Banda luminoasă ECLIPSE SL100 poate fi controlată printr-un întrerupător simplu de pornire/oprire, un întrerupător momentan, un ecran multifuncțional compatibil sau un dispozitiv inteligent.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation de la bande lumineuse Garmin Eclipse SL100 (EN)

Avis de l'expert

« Marine lighting ECLIPSE SL100: Simplified integration and reliability »

The Garmin ECLIPSE SL100 LED strip is a supplemental lighting solution that stands out for its ability to blend discreetly into deck or cabin layouts. Its flexible design, with a minimum vertical bend radius of 50 mm, allows it to follow the contours of the boat, providing effective indirect lighting without being intrusive. Unlike the two-color or RGB versions in the ECLIPSE range, this single-color blue model does not require integration with an ECLIPSE Command Center, simplifying wiring and installation for more basic setups. This simplicity is an asset for owners seeking a "plug-and-play" solution for accent lighting.

The most critical aspect of installation is the cutting and sealing of the ends. It is essential to follow the instructions precisely to maintain the IP68 rating of the strip, particularly the application of the provided silicone. For enhanced durability in outdoor environments or areas subject to vibrations, using the screw-in mounting clips in addition to the adhesive is highly recommended. This ensures reliable mechanical retention against the stresses of the marine environment. This type of strip is particularly suitable for mid-sized boats where a decorative touch is desired without excessive system complexity. It should be noted that, while IP68-rated, it is not designed for permanent submersion, limiting its use to deck areas or interior spaces protected from prolonged immersion.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SL100, bandă luminoasă albastră, 2,5 m

399,26 RON

399,26 RON ~~432,27 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the color of this ECLIPSE SL100 LED strip?

This Garmin ECLIPSE SL100 light strip is blue in color. It provides simple and effective accent lighting.

What is the length of the ECLIPSE SL100 LED light strip?

The ECLIPSE SL100 light strip has a length of 2.5 meters.

Is this LED light strip suitable for outdoor use on a boat?

Yes, the ECLIPSE SL100 LED strip is made from UV-resistant materials and is fully encapsulated, making it suitable for interior and exterior marine environments. However, it must not be installed in areas of direct strong sunlight.

What is the waterproof rating of the ECLIPSE SL100 LED strip?

The ECLIPSE SL100 LED light bar has an IP68 rating. This ensures protection against dust and temporary immersion, but it is not designed for permanent submersion in water.

Can the light strip be cut to fit a specific length?

Yes, the LED strip can be cut at the marked cutting points. It is essential to seal the cut end with the supplied silicone adhesive to maintain the product's waterproofing.

How to install the ECLIPSE SL100 LED strip light?

Installation takes place in several steps:

Clean the mounting surface thoroughly with IPA.
Remove the 3M adhesive backing and press the strip firmly into place, applying pressure only to the edges (not on the LEDs).
For outdoor installations, wet areas, or tight radii, it is recommended to use mechanical fasteners (mounting clips) in addition to the adhesive.
Allow the adhesive to set for 24 hours before powering on the light strip.

Are additional fastenings required for installation in outdoor environments or wet areas?

Yes, for outdoor installations in humid areas or with tight bending radii, it is recommended to use mechanical fastenings (mounting clips) in addition to the adhesive layer. These fastenings should be spaced 250 to 300 mm apart.

What is the minimum curvature that the LED strip can withstand?

The ECLIPSE SL100 light strip has a minimum bending radius of 50 mm (1.968 inches) on the vertical axis only. It is imperative not to bend it on the horizontal axis or twist it.

What precautions should be taken when handling or installing the LED strip?

During handling and installation, it is important to:

Do not let the strip fall or twist.Do not apply pressure on the LED area, only on the edge of the strip.Do not pull, stretch, twist or bend the strip on the horizontal axis.Always use two people to install lengths over 1 meter.Unroll the strip flat in a straight line and do not let it bend, twist or bunch up.

What type of surface is recommended for installing the adhesive tape?

The mounting surface must be perfectly clean, free of dust and dirt. It is recommended to clean it thoroughly with isopropyl alcohol (IPA) before applying the 3M adhesive tape.

What is the required supply voltage for this LED strip?

The ECLIPSE SL100 LED light bar is designed to operate exclusively on 12V DC boat systems. It can function within a voltage range of 10 to 15V DC. Never connect it to voltages outside this range or directly to AC power.

Can I connect this LED strip to a 24V electrical system?

No, this LED strip is designed to operate only with 12V DC boat systems. Connecting it to a 24V system could damage it.

Does this single-color LED light bar require an ECLIPSE Command Center?

No, this single-color blue version of the ECLIPSE SL100 light strip does not require an ECLIPSE Command Center to operate. It can be wired directly to an on/off switch. However, it can be connected to a Command Center if desired, following the specific wiring diagrams.

How many LEDs are there per meter on this LED strip?

The ECLIPSE SL100 LED strip integrates 60 LEDs per meter, providing uniform and efficient lighting.

What is the power consumption of the ECLIPSE SL100 LED strip?

The typical power consumption of the ECLIPSE SL100 LED strip is 5 watts per meter. This corresponds to a current draw of 0.41 amperes at 12V per meter.

Is this LED light strip UV-resistant?

Yes, the ECLIPSE SL100 LED strip is made from UV-resistant materials. However, it is recommended not to install it in areas exposed to strong, prolonged direct sunlight.

What should I do after cutting the light strip to the correct length?

After cutting the light strip, it is crucial to seal the cut end. Peel back 20 mm of the adhesive backing, mark and remove the adhesive tape to expose the silicone, then fill the end cap halfway with the supplied silicone adhesive and secure it. Allow to cure for 24 hours before handling.

Is it necessary to hire a professional for the installation of this LED strip?

A qualified professional should strongly be involved in the electrical and mechanical installation of the ECLIPSE SL100 LED strip to ensure proper and safe installation.

Can I mix single-color and RGB LED strips on the same zone of an ECLIPSE Command Center?

No, single-color, dual-color, and RGB LED strips must not be connected to the same zone output on an ECLIPSE Command Center. Each type of LED strip requires a dedicated zone output.

What is the main purpose of the ECLIPSE SL100 light strip?

The ECLIPSE SL100 LED light strip is designed to provide decorative and indirect lighting. It is ideal for creating an ambiance on the gunwales, under furniture, or behind ceiling panels on your boat.