ECLIPSE SL100, Strip Light, White, 2.5m - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 7%

Garmin

010-04481-00

ECLIPSE SL100, bandă luminoasă albă, 2,5 m

La bande lumineuse Garmin ECLIPSE SL100 blanche de 2,5 mètres est une solution d'éclairage marin flexible et discrète, idéale pour les applications intérieures et extérieures grâce à sa protection IP68 et sa résistance aux UV. Opérant sur 12V DC, elle offre un éclairage blanc de 5000 K et peut être coupée à la longueur souhaitée. Ce produit, de la gamme SL100, est livré avec l'adhésif silicone, les embouts de finition et les clips à visser pour une installation complète.

Prix publicBénéficier du tarif pro

398,30 RON

398,30 RON ~~432,27 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Ruban lumineux
Tensiune de funcționare	10-15
Consum electric tipic	12.5
Flux luminos	1250.0
Temperatură culoare	5000.0
Culoare lumină	Blanc
Indice IP	IP68
Lungime bandă	2.5
Densitate LED-uri / metru	60.0
Spate adeziv	Oui
Bend Axis Restriction	Vertical uniquement
Current Consumption Per Meter	0.5
Current Draw Typical Per Meter	0.41
Fuse Requirement	Oui
Min Bend Radius Vertical Mm	50
Consum electric pe metru	6
Power Consumption Typical Per Meter	5
Strip Height Mm	5.2
Lățime bandă	12.0
Rezistență UV	Oui

Description détaillée

Banda luminoasă ECLIPSE SL100 albă de 2,5 metri de la Garmin este o soluție de iluminat marin flexibilă, concepută pentru iluminare decorativă și indirectă pe diverse tipuri de nave. Parte a colecției ECLIPSE de la Lumishore, această bandă luminoasă combină o construcție robustă cu opțiuni versatile de control, deosebindu-se de variantele RGB care necesită un centru de comandă ECLIPSE și module de extensie opționale pentru control complet.

Design și Specificații Tehnice

Cu o lungime de 2,5 metri și o densitate de 60 LED-uri pe metru, SL100 oferă iluminat alb de 5000 K. Funcționează exclusiv pe sisteme 12V DC, cu o tensiune de intrare cuprinsă între 10 și 15V DC. Consumul maxim de energie este de 6 wați pe metru, cu un curent de 0,5 A la 12V. Designul complet încapsulat și etanșat îi conferă o protecție IP68, fiind adecvată pentru instalări interioare și exterioare, inclusiv în zone umede, deși nu este proiectată pentru imersiune permanentă. Banda este fabricată din material rezistent la UV, dar trebuie evitată expunerea directă și intensă la soare pentru a-și păstra durabilitatea. Dimensiunile sale sunt de 10,8 mm lățime și 5,2 mm înălțime.

Flexibilitate și Instalare

Flexibilitatea benzii luminoase ECLIPSE SL100 permite integrarea în spații variate, precum pavăze, sub mobilier sau în spatele panourilor de plafon. Are un raza minim de curbură de 50 mm pe axa verticală, dar este esențial să nu fie îndoită pe axa orizontală sau răsucită. Instalarea este facilitată de posibilitatea de a fi tăiată la punctele marcate și de a fi sigilată cu ajutorul adezivului siliconic și a capetelor furnizate. Montajul se realizează prin benzi adezive 3M sau cleme de înșurubare incluse. Pentru instalări exterioare, în zone umede sau cu raze de curbură strânse, se recomandă utilizarea de fixări mecanice suplimentare la fiecare 250–300 mm. Seria SL100 este disponibilă și în lungimi de 1 metru și 5 metri, oferind opțiuni pentru diferite configurații. Variantele bicolore (albastru și alb) și RGB sunt de asemenea disponibile, cu cerințe specifice de cablare și control pentru acestea din urmă.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation de la bande lumineuse Garmin Eclipse SL100 (EN)

Avis de l'expert

« Marine accent lighting: Garmin ECLIPSE SL100 analysis »

The Garmin ECLIPSE SL100 2.5-meter lighting strip in version 2 is a strategic accent lighting solution for recreational boaters and professionals looking to enhance the aesthetics and functionality of their vessel. Its versatile installation, thanks to vertical-axis flexibility and the ability to be cut to size, makes it particularly suitable for discreet, custom integrations. We recommend it for areas requiring indirect lighting, such as handrails, stair treads, or cockpit perimeters, where it can create ambiance without glare.

Integrating the SL100 into existing 12V DC systems is straightforward, and its compatibility with various control modes (MFD, switch) offers useful flexibility. It is critical to follow installation guidelines, particularly regarding bend radius and the use of mechanical fasteners in addition to adhesive for demanding environments. While UV-resistant and IP68-certified, it is not designed for prolonged submersion; positioning must therefore be above the waterline. Compared to the RGB version, the white SL100 is simpler to install and control, requiring no dedicated ECLIPSE control hub, making it a cost-effective and efficient choice for reliable monochrome lighting.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SL100, bandă luminoasă albă, 2,5 m

398,30 RON

398,30 RON ~~432,27 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the color and color temperature of this LED strip?

This Garmin ECLIPSE SL100 light strip emits a white light with a color temperature of 5000 K.

What is the length of the ECLIPSE SL100 light strip?

The ECLIPSE SL100 light strip has a length of 2.5 meters.

Is this LED strip waterproof and suitable for outdoor installation?

Yes, the LED strip is fully encapsulated and sealed, providing IP68 protection. It can be installed indoors or outdoors, including in wet areas. However, it is not designed for permanent submersion in water.

What is the required power supply voltage for this LED strip?

The ECLIPSE SL100 LED light bar is designed to operate exclusively on 12V DC boat systems. It can operate within a voltage range of 10 to 15V DC. Do not connect it to voltages outside this range or directly to AC voltage.

What is the power consumption of the LED strip?

The maximum power consumption of the LED strip is 6 watts per meter. Typical current draw is 0.5 A at 12V.

Can I bend the light strip to fit curved surfaces?

Yes, the belt has a minimum bending radius of 50 mm (1.968 inches) only in the vertical axis. It is important not to bend it in the horizontal axis or twist it.

How can I cut the LED strip to the desired length?

To cut the light strip:

Unroll the strip on a flat surface and identify the end to cut.Measure and mark the required length, ensuring you only cut at the marked cut points.Use a pair of scissors to cut the strip with a single cutting motion at the center of the cut tabs.

Should the end of the light strip be sealed after cutting it?

Yes, it is essential to seal the cut end to maintain waterproof properties. The process involves peeling 20mm of the adhesive backing, lightly scoring the adhesive 10mm from the end, removing the tape to expose the silicone, filling the end cap halfway with the supplied silicone adhesive, then attaching the cap. Allow 24 hours to cure before handling.

How to mount the LED strip on a surface?

The light strip comes with a 3M adhesive backing. Clean the mounting surface thoroughly with isopropyl alcohol (IPA) to ensure it is free of dust and dirt. Then, remove the adhesive film and press the strip firmly, applying pressure only along the edges (not on the LEDs). Allow the adhesive to set for 24 hours before turning on the strip.

Are mechanical fastenings required for installation?

For outdoor installations in wet areas or with tight bend radii, it is recommended to use mechanical fasteners (mounting clips) in addition to the adhesive layer. These fasteners should be placed every 250 to 300 mm and/or on each side of a bend, avoiding alignment with the LEDs.

Can I install this LED strip myself?

A qualified professional should perform the electrical and mechanical installation to ensure correct and safe installation.

Is the LED strip UV-resistant?

Yes, the LED strip is made from UV-resistant material. However, it must not be installed in areas exposed to direct and intense sunlight to preserve its long-term durability.

What are the dimensions of the light strip?

The light strip has a width of 10.8 mm and a height of 5.2 mm.

How to connect the LED strip to a switch?

For a simple connection, the single-channel LED strip can be wired to a power switch. The red wire of the strip connects to +12V (via a fuse), and the black wire connects to the switch, which in turn connects to ground (GND).

Is this LED strip compatible with an ECLIPSE control unit?

Yes, the ECLIPSE SL100 white LED strip is compatible with an ECLIPSE control unit. For installation with the control unit, the red wire of the ECLIPSE cable harness must be connected to the red wire of the strip, and the blue and white wires of the ECLIPSE harness must be connected to the black wire of the strip.

Can I mix different types of LED strips (single, dual, RGB) on the same zone output of an ECLIPSE control panel?

No, it is important not to add single-color, dual-color, and RGB lights to the same zone output. Use a separate zone output for each type of light strip.

Are there any precautions to take when handling the light strip?

Yes, during installation, unroll the strip carefully from the spool and do not let it fall or twist. Do not apply pressure on the LED area; press only on the edges of the strip. Do not pull, stretch, twist, or bend the strip along the horizontal axis. For lengths over one meter, it is recommended to use two people.

What happens if the cut end of the LED strip is not properly sealed?

If the adhesive is not properly removed from the sealing end or if the sealing process is not performed correctly, this could compromise the waterproofing properties of the assembly and risk voiding the warranty.