ECLIPSE SNL100, Neon Flex Light, 1M - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 8%

Garmin

010-04534-00

ECLIPSE SNL100, bandă Neon Flex, 1 m

Le GARMIN ECLIPSE SNL100 Neon Flex Light 1M est un éclairage LED flexible IP68, conçu pour les applications marines intérieures et extérieures. Ce modèle de 1 mètre, doté de 120 LEDs RGB/m et fonctionnant en 12V DC, offre une lumière continue sans points visibles et peut être coupé à des longueurs personnalisées. Il est livré avec les clips de fixation en acier inoxydable.

Prix publicBénéficier du tarif pro

297,60 RON

297,60 RON ~~324,18 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Bande lumineuse flexible
Consum electric tipic	6
Culoare lumină	Multicolore
Indice IP	IP68
Variator compatibil	Oui
Fascicul orientabil	Non
Bending Axis	Latéral
Culoare / finisaj	Blanc translucide
Cutting Feature	Coupe et scellement
Cut Increment Mm	25
Înălțime	22
Material carcasă	Matériau résistant aux UV
Tipul instalației	Montage en surface
Comutator integrat	Non
Led Per Meter	120
Tip LED	RGB
Length M	1
Min Bend Radius Mm	120
Interval de tensiune de funcționare	10-15V
Power Consumption Typical Per Meter	5
Lățime	16

Description détaillée

Banda luminoasă flexibilă Neon Flex GARMIN ECLIPSE SNL100 de 1 metru este o soluție de iluminat LED concepută pentru aplicații marine, oferind o iluminare continuă fără puncte vizibile. Adaptată pentru medii interioare și exterioare, această bandă luminoasă este complet etanșă, cu certificare IP68, protejând împotriva prafului și a imersiei temporare. Funcționează pe o alimentare de 12V CC, cu o tensiune de intrare cuprinsă între 10 și 15V CC, și consumă aproximativ 6 wați pe metru.

Concepție și flexibilitate specifice

Fabricată dintr-un material rezistent la UV, GARMIN ECLIPSE SNL100 are o construcție "bend-flex" care permite urmărirea contururilor suprafețelor curbate, precum pavăzele, căptușelile de cabină sau T-topurile. Are un rază de curbură minimă de 120 mm pe axa verticală. Este strict interzisă îndoirea pe axa orizontală sau torsiunea pentru a păstra integritatea structurală. Fiecare metru include 120 LED-uri RGB, asigurând o difuzare uniformă a luminii.

Instalare și integrare în sistem

Acest model de 1 metru poate fi tăiat la lungimi personalizate în incremente de 25 mm datorită sistemului "tăiat și etanșat", oferind adaptabilitate pentru necesitățile specifice ale fiecărei instalații. Instalarea este simplificată prin cablare ușoară (2, 3 sau 4 fire, în funcție de versiunea de culoare; pentru acest produs de 1m, este vorba de o versiune RGB care necesită cablare cu 4 fire). Versiunile RGB necesită un ECLIPSE Command Center pentru control complet, în timp ce versiunile monocrom sau bicolore pot fi comandate printr-un întrerupător. Seria SNL100, disponibilă și în lungimi de 2,5 și 5 metri precum și în diferite culori (albastru, alb 5000K, bicolor albastru și alb 5000K sau RGB), se poziționează ca o alternativă flexibilă la iluminatul marin rigid, oferind o estetică modernă și personalizare avansată. Este furnizată cu cleme de fixare din oțel inoxidabil pentru montare sigură.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation ECLIPSE SNL100 Neon Flex (EN)

Avis de l'expert

« Technical analysis: Garmin ECLIPSE SNL100 Neon Flex Light 1M »

The GARMIN ECLIPSE SNL100 flexible LED strip, 1 meter long, is intended for boat owners looking to add subtle, customizable ambient lighting without the constraints of rigid fixtures. Its ability to conform to curves with a 120 mm bending radius makes it particularly suitable for aesthetic applications along interior gunwales, under sun awnings, or as backlighting for panels. It is specifically designed for 12V DC electrical systems, which is the standard on the vast majority of recreational vessels.

Installing this 1-meter model is relatively straightforward, though the cutting and sealing process at the ends requires careful attention to maintain IP68 waterproofing. It is essential not to bend the Neon Flex along its horizontal axis or twist it, as this could damage the internal LED strip. While water-resistant (IP68), it is not designed for permanent submersion, limiting its use to non-immersed areas. Its UV-resistant material ensures good long-term durability, but prolonged exposure to intense sunlight should be avoided to maximize its lifespan. Compared to other supplemental lighting solutions, the SNL100 provides continuous, even light without the "light dots" effect typical of standard LED strips, offering a more high-quality finish.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SNL100, bandă Neon Flex, 1 m

297,60 RON

297,60 RON ~~324,18 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the GARMIN ECLIPSE SNL100, Neon Flex Light?

The GARMIN ECLIPSE SNL100, Neon Flex Light, is a 1-meter flexible LED lighting solution designed specifically for marine applications. It provides continuous illumination without visible hotspots and is suitable for both indoor and outdoor environments.

Is the GARMIN ECLIPSE SNL100 suitable for outdoor or humid environments?

Yes, this LED strip is fully sealed with IP68 certification, protecting it against dust and temporary immersion. It can be installed indoors or outdoors, including in damp areas, but is not designed for permanent submersion in water.

What is the power consumption of this LED strip light?

The GARMIN ECLIPSE SNL100 light strip consumes approximately 6 watts per meter.

What material is the LED strip made of and is it UV-resistant?

The LED light strip is made from UV-resistant material, ensuring durability even when exposed to sunlight. However, it is recommended not to install it in areas of direct strong sunlight.

Does the GARMIN ECLIPSE SNL100 produce continuous lighting or visible light points?

The GARMIN ECLIPSE SNL100 is designed to provide continuous and uniform illumination, with no visible bright spots, thanks to its 120 RGB LEDs per meter.

What is the length of the Garmin Eclipse SNL100 LED light strip?

The GARMIN ECLIPSE SNL100 LED light bar has a length of one meter (1M).

What are the physical dimensions of the Neon Flex LED strip?

The light strip has a width of 16 mm and a height of 22 mm.

Can I cut the GARMIN ECLIPSE SNL100 LED strip to a custom length?

Yes, this model can be cut to custom lengths in 25 mm increments thanks to its 'cut-and-seal' design. It is imperative to cut only at the marked cut points and to use the provided sealing kit to ensure waterproofing.

How should the light strip be handled during installation?

It is important to carefully unroll the Neon Flex along its entire length and let it relax for about an hour before installation. Do not drop it, twist it, or apply excessive pressure. It is recommended to use two people to install lengths over one meter.

What is the flexibility of the GARMIN ECLIPSE SNL100 LED strip and how can it be bent?

The light strip features a 'bend-flex' design that allows it to follow the contours of curved surfaces. It has a minimum bending radius of 120 mm on the vertical axis (meaning it bends along its widest face). It is critical not to bend it on the horizontal axis (along its narrowest edge) or twist it to preserve its structural integrity.

Are there any precautions to take before starting the electrical installation?

Yes, it is crucial to always ensure that the vessel's power source and battery are disconnected or isolated before proceeding with installation. It is also strongly recommended that a qualified professional performs the electrical and mechanical installation.

Where should I NOT install the ECLIPSE Neon Flex LED strip?

Although the Neon Flex is UV-resistant, it must not be installed in areas exposed to strong direct sunlight. Additionally, while it can be installed in damp areas, it is not designed to be permanently submerged in water.

Is it recommended to use a professional for installation?

Yes, it is strongly recommended that a qualified professional carries out the electrical and mechanical installation of the LED strip to ensure a correct and safe installation.

How should I seal the cut ends of the LED strip?

After cutting the light strip at a marked cut point, you must use the provided sealing kit. It is recommended to wrap the Neon Flex during this process to retract the printed circuit board (PCB), which will prevent the sealant from covering the LEDs and avoid their discoloration.

Are there specific instructions for unrolling the light strip before installation?

Yes, you must fully unroll the Neon Flex from the spool and let it relax flat for at least one hour before installation. Do not allow it to bend, twist, or bunch up.

Is it necessary to have several people to install Neon Flex lengths?

Yes, it is recommended to use two people to install Neon Flex lengths longer than one meter: one person for installation and another to hold and unroll the light strip.

What type of power supply is required for the GARMIN ECLIPSE SNL100?

The GARMIN ECLIPSE SNL100 is designed to operate exclusively with 12V DC boat systems. It can operate within a voltage range of 10 to 15V DC.

Is the GARMIN ECLIPSE SNL100 compatible with AC power systems?

No, it is imperative not to connect the GARMIN ECLIPSE SNL100 to voltages outside the 10–15V DC range, nor to connect it directly to AC voltage (alternating current).

Is a specific controller required for the RGB version of this LED strip?

Yes, the RGB version of Neon Flex MUST be used in conjunction with an ECLIPSE Command Center and optional extension modules for operation and control.

Can I mix different types of lights (monochrome, bicolor, RGB) on the same zone output of the Command Center?

No, it is important not to add monochrome, bicolor, and RGB lights to the same Command Center zone output. You must use a separate zone output for each type of lighting.