ECLIPSE SNL100, Neon Flex Light, Blue, 2.5m - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 7%

Garmin

010-04490-00

ECLIPSE SNL100, bandă Neon Flex albastră, 2,5 m

Ce bandeau flexible LED Garmin ECLIPSE SNL100 bleu de 2,5m offre un éclairage marin sans points visibles, résistant aux UV et certifié IP68 pour les systèmes 12V. Issu de la gamme ECLIPSE SNL100, il se distingue par sa capacité à être découpé sur mesure tous les 25 mm pour une intégration précise. Le produit est fourni avec un kit de scellement et des clips de fixation en acier inoxydable.

Prix publicBénéficier du tarif pro

552,37 RON

552,37 RON ~~594,39 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Bandeau lumineux flexible
Consum electric tipic	12.5
Culoare lumină	Bleu
Indice IP	IP68
Variator compatibil	Oui
Densitate LED-uri / metru	60.0
Fascicul orientabil	Non
Unghi de fascicul	180
Bend Orientation	Horizontal
Culoare / finisaj	Bleu
Material carcasă	Polymère résistant aux UV
Illumination Effect	Continu, sans points visibles, effet néon
Mediu instalare	Intérieur, Extérieur, Zones humides
Tipul instalației	Montage en surface
Comutator integrat	Non
Length Meters	2.5
Max Current Per Meter	0.5
Rază de curbură minimă	120
Interval de tensiune de funcționare	10-15
Power Consumption Typical Per Meter	5
Dimensiuni produs (L x l x H)	2500 x 16 x 22
Rezistență UV	Oui

Description détaillée

Proiectat pentru iluminatul marin interior și exterior, bandă luminoasă flexibilă Garmin ECLIPSE SNL100 oferă o iluminare continuă și fără puncte vizibile, imitând estetica neonului. Acest model specific, cu o lungime de 2,5 metri, emite o lumină albastră și este optimizat pentru sistemele electrice de 12V, acceptând o plajă de tensiune de 10 până la 15V CC. Cu o densitate de 60 LED-uri pe metru, asigură o difuzare luminoasă omogenă.

Integrare și performanțe electrice

Fiecare metru de bandă Garmin ECLIPSE SNL100 consumă aproximativ 5 wați în utilizare tipică și până la 0,5 amperi maxim. Construcția sa complet capsulată și turnată, combinată cu un difuzor fără puncte, îi conferă o robustețe adaptată mediului marin. Are clasificarea IP68, asigurând protecție completă împotriva prafului și imersiune temporară, deși nu este proiectată pentru imersiune permanentă. Materialul rezistent la UV menține durabilitatea chiar și în condiții de expunere solară directă, deși se recomandă instalarea la adăpost de lumina directă intensă a soarelui.

Flexibilitate și instalare

Designul flexibil al benzii permite adaptarea acesteia la suprafețe curbate cu un rază de curbură minimă de 120 mm pe axa verticală. Nu trebuie îndoită pe axa orizontală și nici răsucită. Construcția sa "tăiată-la-lungime" oferă o mare adaptabilitate: poate fi tăiată la fiecare 25 mm și sigilată cu ajutorul kitului de silicon furnizat, permițând o personalizare precisă a lungimii. Instalarea se realizează cu ajutorul clipurilor din oțel inoxidabil, de fixat la fiecare 300 mm, cu clipuri suplimentare pentru curbe strânse. Acest model monocrom albastru se distinge de variantele bicolore sau RGB din gama ECLIPSE SNL100 prin simplitatea instalării cu 2 fire, necesitând doar un întrerupător pornit/oprit direct, spre deosebire de modelele RGB care necesită un ECLIPSE Command Center pentru funcționare și control prin MFD sau dispozitiv inteligent.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation des bandeaux lumineux flexibles ECLIPSE SNL100

Avis de l'expert

« Garmin ECLIPSE SNL100 flexible lighting: flexibility and neon effect for 12V »

The Garmin ECLIPSE SNL100 flexible strip light in 2.5-meter blue is a versatile lighting solution for recreational boaters seeking to combine aesthetics and functionality. Its neon-style design with no visible points creates continuous lighting effects, ideal for courtesy lighting in cockpits, under coachroofs, or to highlight interior cabin lines. It is particularly suited to owners of mid-sized sailboats and powerboats looking for a discreet, integrated supplementary lighting solution.

The main advantage of this model lies in its flexibility and ability to be cut to size every 25 mm, a feature that greatly simplifies adaptation to specific spaces. The provided sealing kit is essential for maintaining waterproofing after cutting. Installation is made easier by stainless steel mounting clips, but it is crucial to respect the minimum 120 mm bend radius on the vertical axis and never bend it horizontally or twist it to preserve its structural and optical integrity. For single-color installations like this blue model, a simple 12V switch connection is sufficient, offering straightforward integration. While it is IP68 rated, it is important to note that it is not designed for permanent submersion, and it should be positioned in areas where it will not be constantly underwater.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SNL100, bandă Neon Flex albastră, 2,5 m

552,37 RON

552,37 RON ~~594,39 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the color of this Garmin ECLIPSE SNL100 LED strip?

This specific model of the Garmin ECLIPSE SNL100 light bar emits a blue light.

What is the total length of the light strip?

The Garmin ECLIPSE SNL100 LED light bar has a length of 2.5 meters.

Can the ECLIPSE SNL100 LED light bar be installed outdoors on a boat?

Yes, the ECLIPSE SNL100 LED strip is fully encapsulated and potted, making it suitable for installation indoors as well as outdoors, including in damp areas.

What is the IP rating of the light strip?

The LED strip has an IP68 rating. This ensures full protection against dust and temporary immersion resistance. However, it is not designed for permanent submersion.

What is the power consumption of this LED light strip?

Each meter of the Garmin ECLIPSE SNL100 LED strip consumes approximately 5 watts in typical use, and up to a maximum of 0.5 amperes per meter.

What is the required supply voltage for the ECLIPSE SNL100 LED strip?

The LED strip is designed to operate exclusively with 12V DC electrical systems. It accepts an input voltage range of 10 to 15V DC.

Can I connect this LED strip to a 24V electrical system?

No, the ECLIPSE SNL100 LED light bar is specifically designed to operate with 12V DC systems only. It must not be connected to voltages outside the 10–15V DC range, nor to AC voltage.

Can the LED strip be cut to a shorter length?

Yes, the LED strip can be cut at specific marked points. It is important to use scissors and follow the cutting method indicated in the installation guide to ensure proper waterproofing. A sealing kit is provided for the cut ends.

How should I handle the light bar during installation to avoid damaging it?

Never unroll it by pulling one end. Do not drop it or allow it to twist. Do not apply excessive pressure. Do not pull, stretch, twist, or bend it vertically. For lengths over one meter, it is recommended to use two people for installation. Always unroll it flat and in a straight line.

Is the LED light strip flexible and can it be bent?

Yes, the LED strip is flexible and can adapt to curved surfaces. It has a minimum bending radius of 120 mm (4.724 inches) on the vertical axis. It must not be bent on the horizontal axis or twisted.

Where should I not install the ECLIPSE SNL100 LED strip?

Although the material is UV-resistant, it is recommended not to install the LED strip in areas exposed to strong direct sunlight to preserve its longevity. It is also not designed for permanent submersion in water.

Is the LED strip UV-resistant?

Yes, the LED strip is made from UV-resistant material, which helps preserve its longevity even when exposed to direct sunlight. However, it is recommended to install it out of direct intense sunlight.

How to connect the LED strip to the power supply?

For a single-color LED strip like this one, connect the RED wire of the strip to the 10.5-15V power source and the BLACK wire to ground (GND). It is recommended to install an appropriate fuse for the circuit.

Is this LED strip compatible with an ECLIPSE Command Center?

Yes, the ECLIPSE SNL100 single-color LED strip can be connected to an ECLIPSE Command Center. For a complete installation and control via the Command Center, consult the Command Center installation manual.

How many LEDs are there per meter on this LED strip?

The Garmin ECLIPSE SNL100 LED strip has a density of 60 LEDs per meter, ensuring uniform light diffusion.

Does the light bar provide continuous lighting without visible light points?

Yes, the ECLIPSE SNL100 LED light bar is designed to provide continuous and seamless illumination, mimicking the aesthetics of neon.

What is the minimum bending radius for this LED strip?

The minimum bending radius for the ECLIPSE SNL100 LED strip is 120 mm (4.724 inches) on the vertical axis. It must not be bent on the horizontal axis nor twisted.

Is this LED strip designed to be permanently submerged in water?

No, although the LED light bar has an IP68 rating and can be installed in wet areas, it is not designed to be permanently submerged in water. It is resistant to temporary immersion.

Should a qualified professional install the LED strip light?

Yes, it is recommended that a qualified professional carry out the electrical and mechanical installation of the light strip to ensure correct and safe installation.

What are the physical dimensions of the light strip (excluding length)?

The light strip has a width of approximately 16 mm (0.622 in) and a height of approximately 22 mm (0.862 in) at its widest point. The illuminated section has a thickness of approximately 14 mm (0.547 in) and the base 8 mm (0.313 in).