ECLIPSE SNL100, Neon Flex Light, White, 2.5m - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 9%

Garmin

010-04493-00

ECLIPSE SNL100, bandă Neon Flex albă, 2,5 m

Le bandeau lumineux Garmin ECLIPSE SNL100 Neon Flex blanc de 2,5m offre un éclairage marine dot-free avec une classification IP68 pour l'intérieur et l'extérieur. Flexible avec un rayon de courbure de 120mm, il est idéal pour l'accentuation des lignes de votre bateau et fonctionne sur les systèmes 12V. Il est livré avec des clips de fixation en acier inoxydable et peut être découpé par pas de 25mm.

Prix publicBénéficier du tarif pro

536,40 RON

536,40 RON ~~594,39 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Bandeau lumineux flexible
Consum electric tipic	15 W
Culoare lumină	Blanc
Indice IP	IP68
Variator compatibil	Oui
Densitate LED-uri / metru	60.0
Fascicul orientabil	false
Culoare / finisaj	Blanc
Cut Interval Mm	25
Material carcasă	Polymère résistant aux UV
Installation Environment Type	Intérieur, Extérieur, Zones humides
Installation Restriction Axis	Ne pas plier sur l'axe horizontal ni tordre
Tipul instalației	Montage en surface
Comutator integrat	false
Light Effect Detail	Sans points visibles
Max Power Consumption Current A	1.25 A
Min Bend Radius Mm	120
Interval de tensiune de funcționare	10-15 VDC
Power Consumption Typical Per Meter	6 W/m
Power Source Compatibility	12V DC
Rezistență UV	Oui

Description détaillée

Proiectat pentru iluminatul de accentuare marin, banda luminoasă ECLIPSE SNL100 Neon Flex de la Garmin este o soluție flexibilă de tip neon, în mod specific modelul alb de 2,5 metri. Acest sistem de iluminat LED este destinat instalațiilor interioare și exterioare, inclusiv în zone umede, deși nu este conceput pentru imersie permanentă.

Integrare și performanță luminoasă

Banda ECLIPSE SNL100 oferă un iluminat alb continuu de 5000K, fără puncte vizibile, datorită unei densități de 60 LED-uri albe pe metru. Funcționează la o tensiune de 10 până la 15 VCC, specific pentru sistemele de bord de 12V. Consumul mediu este de 6 W/m, cu un curent maxim de 0,5 A/m la 12 V. Produsul are clasificarea IP68, asigurând protecție totală împotriva prafului și a imersiei temporare în apă.

Flexibilitate și instalare

Fabricată dintr-un material rezistent la UV, banda ECLIPSE SNL100 este flexibilă și permite conturarea suprafețelor curbate datorită unui rază de curbură minimă de 120 mm pe axa verticală. Este important să nu fie răsucită sau îndoită pe axa orizontală pentru a evita deteriorarea benzii LED interne. Această bandă poate fi tăiată la lungimi personalizate în pași de 25 mm, necesitând etanșarea capetelor tăiate. Instalarea este facilitată de un cablaj cu 2 fire și utilizarea clipsurilor de fixare din oțel inoxidabil furnizate. Poate fi controlată printr-un întrerupător simplu de tip pornire/oprire sau, pentru o integrare avansată, printr-un ecran multifuncțional compatibil, un dispozitiv inteligent sau un întrerupător momentan, necesitând în acest caz un centru de comandă ECLIPSE. Spre deosebire de versiunile RGB din gama ECLIPSE, care necesită obligatoriu centrul de comandă, versiunea monocromă SNL100 oferă opțiunea de instalare simplificată cu un întrerupător de bază.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation ECLIPSE SNL100 Neon Flex (EN)

Avis de l'expert

« Marine accent lighting ECLIPSE SNL100: flexibility and integration »

The Garmin ECLIPSE SNL100 strip light stands out as an ideal accent lighting solution for recreational and rigid inflatable boats, where aesthetics and discreet integration are paramount. Its ability to provide continuous light without point-light effects makes it particularly suitable for highlighting deck lines, illuminating a console, or creating a soft ambiance in a cockpit. Unlike traditional LED strips, its "neon flex" construction allows for uniform curvature along the vertical axis, a major advantage for curved surfaces such as gunwales or side decks. However, it is essential to respect its minimum bending radius of 120 mm and avoid bending it along the horizontal axis, as this would compromise the integrity of the internal LED strip. For installations longer than one meter, handling by two people is recommended to avoid any twisting or improper folding during unrolling and installation.

While the SNL100 can be connected to a simple switch for basic on/off operation, its full integration potential is unlocked with the ECLIPSE control center. This enables control via MFD or smartphone, offering increased flexibility for lighting scenarios. It is important to note that for multicolor (RGB) installations, the control center is mandatory. For this monochrome white model, the option of a direct switch simplifies installation for those who do not require advanced control, which can be an advantage in terms of cost and complexity for smaller boats. Finally, the ability to cut the strip at 25 mm intervals provides great adaptability to the specific dimensions of each area to be illuminated, provided that proper waterproofing of the cut end is carried out—a critical step to maintain IP68 protection.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SNL100, bandă Neon Flex albă, 2,5 m

536,40 RON

536,40 RON ~~594,39 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the color of the light emitted by the ECLIPSE SNL100 strip light?

The ECLIPSE SNL100 LED strip emits white light.

What is the total length of this Garmin ECLIPSE SNL100 LED strip?

This light strip is 2.5 meters long.

Is this LED light bar suitable for outdoor marine use?

Yes, the ECLIPSE SNL100 strip is designed for indoor and outdoor installations, including in damp areas. It is made from UV-resistant material. However, it is not designed for permanent immersion in water.

What is the color temperature of the emitted white light?

The strip light provides continuous white lighting with a color temperature of 5000K.

How many LEDs are present per meter on this LED strip?

The strip integrates a density of 60 white LEDs per meter, providing continuous and seamless lighting.

What is the IP rating of this LED strip light?

The product has an IP68 rating, ensuring full protection against dust and temporary immersion in water.

Does the ECLIPSE SNL100 strip produce uniform lighting or are the LED points visible?

Thanks to its density of 60 LEDs per meter, the ECLIPSE SNL100 strip light provides continuous and uniform white lighting, with no visible light points.

What is the average power consumption of this LED strip per meter?

The average power consumption of this LED strip is 6 W per meter.

What is the maximum current consumed per meter at 12 V?

The maximum current consumed by the LED strip is 0.5 A per meter at 12 V.

Is it possible to cut the ECLIPSE SNL100 LED strip to a custom length?

Yes, the strip can be cut to custom lengths. Cutting points are marked and cuts must be made in 25 mm increments.

How to ensure the watertightness of the cut ends of the strip?

A sealing kit is provided with the strip. It is essential to use it to seal the newly cut ends following the specific instructions to ensure proper waterproofing and prevent LED discoloration.

Can the LED strip be bent to follow curved surfaces?

Yes, the strip has flexibility allowing it to conform to curved surfaces. It has a minimum bending radius of 120 mm on the vertical axis. It is important not to bend it on the horizontal axis.

Should the boat's power supply be disconnected before installing the LED light strip?

Yes, it is imperative to always ensure that the vessel's power source and battery are disconnected or isolated before proceeding with the installation.

Is it recommended to have this product installed by a professional?

Yes, it is strongly recommended that a qualified professional performs both the electrical and mechanical installation of the LED strip light.

Can the LED light bar be installed in areas exposed to direct sunlight?

No, although the bezel material is UV-resistant, it must not be installed in areas exposed to direct strong sunlight.

Does it require two people to install long sections of the LED strip?

Yes, it is always recommended to use two people to install lengths of strip over 1 meter. One person for the installation and another to hold and unroll the strip.

What is the required operating voltage range for the ECLIPSE SNL100 display?

The LED light strip operates on a DC voltage range of 10 to 15 V. It is specifically designed for 12 V boat systems.

Is this LED strip compatible with 24V boat electrical systems?

No, the ECLIPSE SNL100 display strip is designed to operate only with 12V systems. It must not be connected to voltages outside the 10-15V DC range, nor directly to AC voltage.