ECLIPSE Strip Lt SL100-Blue-White 2.5m, LS, (60-0489-2500) - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 13%

Garmin

010-04484-00

ECLIPSE Strip Lt SL100-Albastru-Alb 2,5m, LS, (60-0489-2500)

Conçu pour l'éclairage marin discret, le Garmin ECLIPSE Strip Light SL100 est un ruban LED flexible bicolore (bleu et blanc 5000K) de 2.5 mètres, offrant une protection IP68. Recoupable et résistant aux UV, il s'intègre facilement pour un éclairage d'ambiance ou fonctionnel. Il est livré avec un kit d'étanchéité (silicone, embouts) et des clips de fixation.

Prix publicBénéficier du tarif pro

445,30 RON

445,30 RON ~~513,56 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Ruban LED marin
Tensiune de funcționare	10-15 VDC
Consum electric tipic	12.5
Culoare lumină	Bleu, Blanc
Indice IP	IP68
Lungime bandă	2.5
Densitate LED-uri / metru	60.0
Spate adeziv	Oui
Bend Axis Restriction	Vertical uniquement
Cuttable	Oui
Direct Sunlight Exposure Restriction	Oui
Min Bend Radius Vertical Mm	50
Mounting Clips Included	Oui
Instalare profesională recomandată	Oui
Sealing Kit Included	Oui
Strip Height Mm	5.2
Lățime bandă	12.0
Submersion Resistance	Non

Description détaillée

Proiectat pentru iluminatul marin discret și funcțional, Garmin ECLIPSE Strip Light SL100 bicolor de 2,5 metri (referință 010-04484-00) este o soluție flexibilă și robustă. Acest bandă LED integrează 60 diode pe metru, oferind iluminare simultană sau separată în albastru și alb (5000K). Indicele său de protecție IP68 garantează o rezistență completă la apă și praf, fiind adecvat pentru instalații interioare și exterioare, inclusiv în zone umede, deși nu este conceput pentru imersiune permanentă.

Specificații tehnice și flexibilitate de instalare

SL100 funcționează la o tensiune de 10 până la 15 VCC, specific sistemelor de 12V ale ambarcațiunilor, cu un consum tipic de aproximativ 5 wați pe metru per canal (respectiv 0,41A la 12V). Construcția sa din material rezistent la UV și complet încapsulată asigură durabilitate în mediul marin. Cu o secțiune de 10,8mm x 5,2mm, permite o integrare discretă. Poate fi tăiat la punctele marcate pentru a se adapta precis la lungimea dorită, iar capetele sunt sigilate folosind kit-ul furnizat (silicon și capete). Montajul se realizează prin intermediul unei adezive 3M preaplicat, completat cu cleme cu șurub incluse pentru o fixare consolidată, recomandată în special pentru instalațiile exterioare sau zonele supuse vibrațiilor. Banda prezintă un rază minimă de curbură de 50mm pe axa verticală, evitând orice torsiune sau îndoire pe axa orizontală.

Opțiuni de control și poziționare în gamă

Controlul Garmin ECLIPSE Strip Light SL100 bicolor poate fi realizat printr-un simplu întrerupător pornire/oprire/pornire, permițând comutarea între albastru și alb (este important să nu se conecteze cele două canale pentru a se aprinde simultan cu un întrerupător direct). Pentru o gestionare mai avansată, este compatibil cu un ECLIPSE Command Center opțional, oferind atunci control prin intermediul ecranelor multifuncționale (MFD) Garmin sau al dispozitivelor inteligente. Această versatilitate îl poziționează ca o soluție de iluminat intermediară în gama Lumishore/Garmin, oferind mai multe funcționalități decât modelele monocromatice de bază, în timp ce este mai puțin complex decât un sistem RGB care necesită obligatoriu un Command Center. Este ideal pentru iluminatul ambiental sub plat-borduri, în coșuri sau sub mobilierul de cockpit.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation bandeau lumineux ECLIPSE SL100 (EN)

Avis de l'expert

« Garmin ECLIPSE SL100 flexible marine lighting: versatility and discretion »

The Garmin ECLIPSE Strip Light SL100 LED strip is a relevant solution for integrating ambient or courtesy lighting on recreational boats of all sizes. Its flexible design allows it to follow the boat's contours, offering discreet lighting that rigid fixtures cannot match. The blue/white bicolor option is a plus, with blue often preferred for night navigation or subdued ambiance, and white for functional lighting. This duality allows adapting the lighting without requiring a more complex and costly RGB system.

In terms of installation, the ability to be cut to length is a major advantage, enabling precise customization of the strip's length. It is crucial to respect the marked cut points and to carefully seal the ends with the provided kit to maintain the IP68 rating of the product. Using both the adhesive and mounting clips is highly recommended, especially in areas exposed to vibrations or constant moisture. While direct connection via a switch is possible for both colors, integration with an ECLIPSE Command Center provides a superior user experience through Garmin MFDs, enabling centralized control and more advanced lighting scenarios. It is imperative, however, not to bend the strip along the horizontal axis to avoid damaging the internal circuits, and to ensure the boat's electrical system is correctly 12V DC.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE Strip Lt SL100-Albastru-Alb 2,5m, LS, (60-0489-2500)

445,30 RON

445,30 RON ~~513,56 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the length of this Garmin ECLIPSE LED strip?

This Garmin ECLIPSE SL100 light strip is supplied in a 2.5-meter length.

Which lighting colors are available for this LED strip?

This specific model of the ECLIPSE SL100 LED light strip provides dual-color lighting, in blue and white (5000K). It allows simultaneous or separate illumination of these two colors.

Is this LED strip waterproof and dustproof?

Yes, the Garmin ECLIPSE SL100 LED strip has an IP68 protection rating. This means it is fully resistant to water and dust, making it suitable for both indoor and outdoor installations, including wet areas. However, it is not designed for permanent submersion.

What is the required supply voltage for this LED strip?

The ECLIPSE SL100 LED light strip is designed to operate with 12V boat systems only. It can function within a direct current (DC) voltage range of 10 to 15 Volts. It must not be connected to voltages outside this range or directly to an alternating current (AC) voltage.

Can I cut the LED strip to a shorter length?

Yes, the LED light strip can be cut at marked points to precisely fit the desired length. A kit is provided to seal the cut ends.

How to seal the ends of the LED strip after cutting it?

To seal a cut end, first remove about 20 mm of the adhesive backing and lightly score the adhesive 10 mm from the end. Then peel the tape from the score line to expose the silicone. Fill the end cap halfway with the supplied silicone adhesive, then fit the cap and wipe off excess adhesive. Allow to cure for 24 hours before handling.

What is the power consumption of this LED strip light?

The typical power consumption of this LED strip is about 5 watts per meter and per channel. The typical current draw is 0.41 ampere at 12V per channel.

How is the light strip mounted on the surface?

Installation is primarily done using a 3M adhesive pre-applied on the tape. For reinforced fixing, particularly recommended for outdoor installations or wet areas, screws and clips are also included.

What precautions should I take when installing the LED strip?

Before installation, ensure the vessel's power source and battery are disconnected or isolated. It is recommended not to install the strip in areas exposed to strong direct sunlight. Do not bend the strip along the horizontal axis or twist it. For lengths over one meter, it is advisable to install with two people. Do not apply pressure on the LEDs, only on the edges of the strip.

Can the ribbon be bent to fit curves?

Yes, the tape has a minimum bending radius of 50 mm (1.968 inches) on the vertical axis. It is important not to bend it on the horizontal axis or twist it.

Can the blue and white channels of the LED strip be lit simultaneously?

No, it is important not to wire the blue and white channels so that they light up at the same time. The strip is designed for simultaneous or separate illumination, but the wiring must be done in a way that does not activate both channels simultaneously via a single simple switch.

Is it necessary to use mechanical fasteners for outdoor installation?

Yes, for outdoor installations, wet areas, or tight bends, it is recommended to use mechanical fastenings (screw clips) in addition to the adhesive layer. These fastenings should be spaced 250 to 300 mm apart and/or placed on each side of a bend, avoiding alignment with the LEDs.

What is the durability of the LED light strip in a marine environment?

The LED strip is made from UV-resistant material and is fully encapsulated, ensuring good durability in the marine environment. Its IP68 rating also contributes to its robustness against water and dust.

Is the LED light strip compatible with an ECLIPSE Command Center?

Yes, this bicolor LED strip can be controlled by an ECLIPSE Command Center. Specific wiring diagrams are provided for this setup. It is important to consult the Command Center installation manual for complete instructions and note that single-color, bicolor, and RGB lights must not be added to the same zone output.

What are the width and thickness of the LED strip?

The light strip section is 10.8 mm wide by 5.2 mm thick, allowing for discreet integration.

How long should the 3M adhesive be left to dry before using the tape?

It is recommended to let the 3M adhesive cure for 24 hours before turning on the LED strip to ensure optimal adhesion.

How to prepare the mounting surface before adhesive installation?

Before applying 3M adhesive, the mounting surface must be thoroughly cleaned with isopropyl alcohol (IPA) to ensure it is free of dust and dirt.

Is the LED light strip designed to be installed by a professional?

A qualified professional should perform the electrical and mechanical installation to ensure correct and safe installation.

Which type of boat electrical system is compatible with this LED light strip?

This LED strip is specifically designed to work with 12V boat systems. It is compatible with direct current (DC) voltages ranging from 10 to 15 Volts.