LUX SL180, Strip Light, CRGBW, 1800mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 8%

Garmin

010-04379-00

LUX SL180, bandă de iluminat, CRGBW, 1800mm

Conçu pour l'éclairage d'ambiance marin, le bandeau lumineux Garmin LUX SL180 de 1800 mm offre un éclairage CRGBW à spectre complet avec blanc tunable (2700K-6500K). Certifié IP68 et résistant aux UV, il est compatible uniquement avec les modules drivers Lumishore LUX pour une intégration système fiable. Les clips de fixation à vis sont inclus pour une installation sécurisée.

Prix publicBénéficier du tarif pro

695,65 RON

695,65 RON ~~756,88 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Bande lumineuse
Tensiune de funcționare	23-25
Consum electric tipic	9
Culoare lumină	Multicolore (CRGBW)
Indice IP	IP68
Variator compatibil	Oui
Lungime bandă	1.8
Spate adeziv	Oui
Compatible Driver Module	Lumishore LUX Strip Light Driver modules
Cuttable	Non
Fastener Spacing Cm	25-30
Mediu instalare	Intérieur, Extérieur, Zones humides
Minimum Bend Radius Vertical	50
Tip de montaj	Adhésif 3M, Fixations mécaniques, Clips de montage
Consum electric pe metru	5
Instalare profesională recomandată	Oui
Salt Fog Tested	Oui
Warranty Period Years	3

Description détaillée

Banda de iluminat LUX SL180 de Garmin, cu lungimea de 1800 mm, este o soluție versatilă de iluminat marin concepută pentru a crea o ambianță luminoasă personalizată la bord. Această bandă CRGBW oferă un spectru complet de culori, incluzând roșu, verde, albastru și un alb reglabil între alb rece și alb cald (2700K la 6500K).

Concepție și specificații tehnice

Cu o construcție complet etanșă și certificare IP68, LUX SL180 este potrivit pentru instalare atât în interior, cât și în exterior, inclusiv în zone umede, deși nu este proiectat pentru imersie permanentă. Fabricat din materiale rezistente la UV și testat împotriva ceții saline, este destinat mediului marin. Consumul este de 5 wați pe metru, iar tensiunea de intrare variază între 23 și 25V. Flexibilitatea este limitată la un rază de curbură de 50 mm pe axa verticală; nu trebuie îndoit pe axa orizontală sau răsucit. Este livrat în lungimi predefinite și sigilat la fabrică pentru a menține conformitatea IP68; nu trebuie tăiat.

Integrare și instalare

LUX SL180 este proiectat special pentru a fi utilizat cu modulele de comandă Lumishore LUX pentru benzi de iluminat. Această cerință asigură compatibilitate optimă și menținerea garanției produsului. Controlul iluminatului se realizează prin intermediul unui MFD Garmin compatibil, a unui ecran Lumishore, a unui dispozitiv inteligent sau a unui întrerupător momentan. Pentru instalare, banda utilizează un adeziv 3M, completat cu cleme de fixare cu șurub pentru instalările exterioare, zone umede sau raze de curbură strânse. Clipse metalice din oțel inoxidabil sunt disponibile opțional pentru canalele de montaj înguste. Comparativ cu soluțiile LED mai generice, LUX SL180 se poziționează ca un component al unui sistem integrat de iluminat, oferind gestionarea avansată a culorilor și durabilitate adaptată aplicațiilor marine solicitante.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation des bandeaux lumineux LUX SL90 & SL180 IP68

Avis de l'expert

Pol CONIN

Responsabil digital

« Technical analysis of the Garmin LUX SL180 CRGBW LED strip light »

The Garmin LUX SL180 LED strip stands out for its full integration within the Lumishore ecosystem, a key consideration for any modern marine lighting installation. Its primary use case is creating sophisticated ambient lighting capable of transforming the atmosphere of a space thanks to its CRGBW spectrum and tunable white. It is ideal for boat owners seeking discreet and high-performance lighting, integrated under gunwales, behind ceiling panels, or beneath furniture, where it remains mostly concealed.

Regarding installation, it is critical to note the requirement to use exclusively the Lumishore LUX LED strip driver module. This dependency limits integration flexibility with third-party systems but ensures optimal performance and compatibility within the Garmin/Lumishore ecosystem. Handling the strip requires caution: its 1800 mm length suggests installation by two people to avoid any twisting or bending on the horizontal axis, which could damage the product. Using mechanical fasteners in addition to the 3M adhesive is strongly recommended for outdoor applications or areas subject to stress (humidity, tight bending radii), ensuring long-term durability. This model is not designed to be cut, meaning precise length planning is required before purchase, unlike other generic LED strips.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SL180, bandă de iluminat, CRGBW, 1800mm

695,65 RON

695,65 RON ~~756,88 RON~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8410 - ecran traceur 10" cu hartă mondială

Ref : 010-02091-00

12.096,15 RON

12.096,15 RON ~~15.889,95 RON~~

Garmin

GPSMAP® 8416xsv - combinat GPS-ecou 16"

Ref : 010-02093-02

28.401,16 RON

28.401,16 RON ~~36.921,41 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What colors are available for the Garmin LUX SL180 LED strip?

The Garmin LUX SL180 LED strip offers a full spectrum of colors (CRGBW), including cyan, red, green, blue, as well as tunable white. The white can be adjusted from cool white to warm white, with a color temperature range from 2700K to 6500K.

What is the length of the Garmin LUX SL180 LED strip?

The Garmin LUX SL180 LED light bar has a predefined length of 1800 mm (1.8 meters). It is supplied in factory-sealed lengths and must not be cut.

What is the power consumption of the LUX SL180 LED strip light?

The LUX SL180 LED strip consumes 5 watts per meter.

Is the LUX SL180 LED light bar waterproof?

Yes, the LUX SL180 LED strip is fully sealed and IP68 certified. It can be installed indoors or outdoors, including in wet areas. However, it is not designed for permanent immersion in water.

What materials are used to manufacture the LUX SL180 light strip?

The LUX SL180 LED strip is made from UV-resistant materials and has been tested in salt spray, making it suitable for marine environments.

Can I cut the LUX SL180 LED strip to fit a specific length?

No, the LUX SL180 LED strip is supplied in predefined, factory-sealed lengths to maintain its IP68 rating. It must not be cut under any circumstances.

What is the color temperature range for the white of the LUX SL180 strip?

The LUX SL180 LED light bar offers tunable white with a color temperature range from 2700K (warm white) to 6500K (cool white).

How can the LUX SL180 LED strip be bent or curved?

The display's flexibility is limited to a minimum bending radius of 50 mm on the vertical axis only. It must not be bent on the horizontal axis or twisted.

Where can I install the LUX SL180 LED strip on my boat?

The LUX SL180 strip can be installed indoors or outdoors, including in damp areas, thanks to its fully sealed design and IP68 certification. However, it must not be installed in areas exposed to direct sunlight or submerged permanently in water.

How to install the LUX SL180 LED strip light?

The strip can be mounted in several ways:

3M adhesive: Remove the adhesive backing and press firmly along the edges of the strip (avoid applying pressure on the LEDs). Allow the adhesive to cure for 24 hours.Mechanical fasteners: For outdoor installations, wet areas, or tight bends, it is recommended to use mechanical fasteners (mounting clips) in addition to the adhesive. These clips should be spaced every 25 to 30 cm and/or on each side of a bend.Stainless steel mounting clips (optional): Metal clips can be provided for narrow mounting channels.

Are there specific recommendations for outdoor installation?

Yes, for outdoor installation or in damp areas, it is strongly recommended to use mechanical fastenings (mounting clips) in addition to the adhesive layer to ensure optimal and durable mounting of the light strip.

Should the surface be prepared before installing the strip with adhesive?

Yes, it is essential to thoroughly clean the mounting surface with isopropyl alcohol (IPA) to ensure it is free of dust and dirt before applying the adhesive.

How long should you wait after adhesive installation before turning on the strip light?

It is recommended to allow the adhesive to set for 24 hours before turning on the LED strip to ensure maximum adhesion.

Should you avoid pressing on the LEDs during installation?

Yes, during installation, do not apply pressure on the LED area. Press only the edges of the strip to secure it properly.

Does the installation of the LUX SL180 strip require multiple people?

For band lengths over 1 meter, it is recommended that two people carry out the installation: one person to secure the band and another to hold and unroll it carefully.

What type of controller is required for the LUX SL180 LED strip?

The LUX SL180 LED strip is specifically designed to be used exclusively with Lumishore LUX LED strip driver modules. It is mandatory to use this type of driver to ensure proper operation and maintain the validity of the warranty.

Can I use a driver or controller from another brand with the LUX SL180 display?

No, the LUX SL180 LED strip must be connected only to Lumishore LUX LED strip driver modules. Using third-party lighting control products or drivers will void the product warranty.

What is the required input voltage range for the LUX SL180 LED light bar?

The LUX SL180 LED strip operates with an input voltage range of 23 to 25V. It is critical to use only Lumishore LUX LED strip driver modules to meet this voltage requirement.

What is the warranty duration for the Garmin LUX SL180 LED light bar?

Garmin (via Lumishore) warrants its lighting systems, including the LUX SL180 strip, against manufacturing defects for a period of three years from the original purchase date.

What conditions could void the warranty of the LUX SL180 display?

The warranty may be voided in case of misuse, abuse, incorrect installation, negligence, inadequate shipping, damage caused by disasters (fire, flood, lightning), installation by unqualified personnel, unauthorized repair or modification, or unapproved installations. Failure to comply with installation guidelines, maintenance, and usage instructions provided in the installation document also constitutes a breach of warranty conditions, including use with third-party drivers.