LUX SL180, Strip Light, CRGBW, 4200mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 11%

Garmin

010-04400-00

LUX SL180, bandă luminoasă, CRGBW, 4200mm

La bande lumineuse Garmin LUX SL180 CRGBW de 4200mm offre un éclairage marin personnalisable avec un spectre complet de couleurs et un blanc réglable de 2700K à 6500K. Certifiée IP68 et résistante aux UV, elle est conçue pour les installations au-dessus de l'eau. Elle est livrée en longueurs prédéfinies et scellées en usine, elle ne doit pas être coupée. Faisant partie de la collection Lumishore LUX, elle nécessite un driver de bande Lumishore LUX pour fonctionner et est livrée avec des clips à vis pour l'installation, mais sans kit d'étanchéité pour découpe.

Prix publicBénéficier du tarif pro

1.530,12 RON

1.530,12 RON ~~1.730,07 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Bande lumineuse
Tensiune de funcționare	23-25 V
Consum electric tipic	21 W
Culoare lumină	Multicolore
Indice IP	IP68
Variator compatibil	Oui
Lungime bandă	4.2
Densitate LED-uri / metru	180.0
Spate adeziv	Oui
Adhesive Setting Time Hours	24
Application Environment	Au-dessus de la ligne de flottaison
Can Be Cut	Non
Compatible Driver Module	Module de pilote Lumishore LUX Strip Light
Construction Type	Entièrement encapsulée et potée
Light Diffuser Type	Anti-point
Min Bend Radius Vertical	50
Optional Mounting Clip Material	Acier inoxydable
Recommended Fastener Spacing Cm	25-30
Recommended Installation Personnel	2

Description détaillée

Concepută pentru integrarea în sistemele de iluminat marin, banda luminoasă LUX SL180 de la Garmin este o soluție de iluminat CRGBW (alb rece, roșu, verde, albastru, alb cald) care oferă un spectru complet de culori și lumină albă reglabilă. Cu o lungime de 4200 mm, această bandă face parte din colecția Lumishore LUX, dezvoltată special pentru aplicații de iluminat inteligent deasupra apei pe nave. Banda luminoasă LUX SL180 este livrată în lungimi predefinite și sigilate la fabrică; nu trebuie tăiată. Nu este furnizat niciun kit de etanșare pentru tăiere, deoarece banda nu trebuie tăiată.

Specificații tehnice și flexibilitate

LUX SL180 integrează 180 LED-uri CRGBW pe metru, oferind o temperatură de culoare albă reglabilă între 2700K și 6500K. Această versatilitate o diferențiază de benzile LED RGB sau soluțiile monocromatice. Construcția sa complet capsulată și turnată, cu un difuzor anti-punct, asigură o distribuție uniformă a luminii. Clasificată IP68, este protejată împotriva prafului și a imersiunii temporare, fiind adecvată pentru instalări interioare și exterioare deasupra liniei de plutire. Fabricată din materiale rezistente la UV și testată în ceață salină, LUX SL180 este proiectată pentru mediul marin. Funcționează la o tensiune de 23 până la 25 V prin intermediul unui modul de driver pentru benzi Lumishore LUX, consumând o putere de 5 wați pe metru. Raza minimă de curbură este de 50 mm pe axa verticală, facilitând instalarea în spații curbate, cu condiția să nu fie îndoită pe axa orizontală sau răsucită. Acest produs este compatibil doar cu modulele de driver pentru benzi Lumishore LUX, asigurând o integrare optimă în ecosistemul de iluminat Garmin/Lumishore.

Control și instalare

Controlul benzii luminoase LUX SL180 poate fi realizat prin intermediul unui ecran multifuncțional (MFD) compatibil, al unui ecran Lumishore, al unui dispozitiv inteligent sau al unui întrerupător momentan. Pentru controlul prin MFD, ecran Lumishore sau dispozitiv inteligent, este necesar un centru de comandă EOS-LUX. Această flexibilitate depășește sistemele de iluminat marin de bază, care sunt adesea limitate la întrerupătoare fizice. Instalarea se realizează cu ajutorul benzilor adezive 3M și al clipsurilor cu șurub furnizate. Pentru instalări exterioare sau în zone umede, se recomandă utilizarea de fixări mecanice suplimentare față de adeziv. Clipsuri din oțel inoxidabil sunt disponibile opțional pentru canalele de montaj înguste. Garanția de 3 ani certifică conformitatea produsului cu standardele Lumishore. Comparativ cu soluții mai simple, precum luminile de curtoazie fixe sau benzile LED generice non-marine, LUX SL180 oferă personalizare a atmosferei luminoase și robustețe adaptate cerințelor specifice ale ambarcațiunilor de agrement și de croazieră.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation des bandeaux lumineux LUX SL90 & SL180 IP68

Avis de l'expert

Pol CONIN

Responsabil digital

«
Non-cuttable CRGBW marine-grade LED strip light for integration
»

The Garmin LUX SL180 light strip is a versatile lighting solution for above-water marine applications. Its main advantage lies in its full-spectrum CRGBW capability, enabling varied lighting ambiences, from functional warm white (2700K) to stimulating cool white (6500K), including colored hues. This flexibility is particularly valuable for both interior and exterior boat layouts, where lighting enhances both safety and comfort.

The LUX SL180 light strip is supplied in predefined, factory-sealed lengths and must not be cut, which limits its integration flexibility compared to cuttable solutions. No sealing kit for cutting is provided since the strip must not be cut. Installation requires a Lumishore LUX strip driver module, necessitating planning for wiring and integration into an existing or new Lumishore system.

While the 3M adhesive backing is convenient for smooth, dry surfaces, using screw clips is strongly recommended, or even essential, for wet, outdoor, or vibration-prone areas. Handling 4.2-meter strips requires caution, particularly to respect the 50 mm vertical bend radius and avoid any twisting that could damage the LEDs or the sealing. This product is ideal for owners seeking an advanced, integrable, and customizable marine lighting solution rather than a generic decorative LED strip not designed for this environment.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SL180, bandă luminoasă, CRGBW, 4200mm

1.530,12 RON

1.530,12 RON ~~1.730,07 RON~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8410 - ecran traceur 10" cu hartă mondială

Ref : 010-02091-00

12.096,15 RON

12.096,15 RON ~~15.889,95 RON~~

Garmin

GPSMAP® 8416xsv - combinat GPS-ecou 16"

Ref : 010-02093-02

28.401,16 RON

28.401,16 RON ~~36.921,41 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the length of the Garmin LUX SL180 light bar?

The Garmin LUX SL180 light strip has a predefined length of 4200 mm (4.2 meters).

What colors are available for the LUX SL180 LED strip?

The LUX SL180 LED strip is CRGBW type. This means it provides a full color spectrum (red, green, blue) as well as two types of white: cool white (Cold White) and warm white (Warm White).

Can the color temperature of the white light on this LED strip be adjusted?

Yes, the color temperature of the white light is adjustable from 2700K (warm white) to 6500K (cool white), providing versatile lighting options.

Is the LUX SL180 light bar waterproof?

Yes, the LUX SL180 LED strip is rated IP68. This means it is fully protected against dust and can withstand temporary immersion in water. It is suitable for indoor and outdoor installations above the waterline but is not designed for permanent submersion.

How many LEDs does the LUX SL180 LED strip contain per meter?

The LUX SL180 light strip integrates 180 CRGBW LEDs per meter.

Is this LED light strip UV and salt spray resistant?

Yes, the LUX SL180 LED strip is made from UV-resistant materials and has been salt-mist tested, making it suitable for marine environments.

What type of diffuser is used on the LUX SL180 LED strip?

The LUX SL180 LED strip features an anti-hotspot diffuser, ensuring uniform light distribution without visible hotspots.

Is it possible to cut the LUX SL180 light strip to fit a specific length?

No, the LUX SL180 LED strip is supplied in predefined lengths sealed at the factory to meet IP68 standards. It must never be cut. No sealing kit for cutting is provided.

How to install the LUX SL180 LED strip?

Installation can be done in several ways:

3M adhesive: Clean the surface, remove the adhesive’s protective film, and press the strip firmly by applying pressure only to the edges. Allow the adhesive to set for 24 hours before turning on the strip.Mechanical fasteners: For outdoor installations, wet areas, or tight bends, it is recommended to use mechanical fasteners in addition to the adhesive. These fasteners should be placed every 25 to 30 cm or on each side of a bend.Mounting clips (optional): Stainless steel metal clips can be provided by Lumishore for narrow mounting channels.

What is the flexibility of the LUX SL180 LED strip?

The light strip has a minimum bending radius of 50 mm in the vertical axis only. It must not be bent in the horizontal axis nor twisted.

What precautions should be taken before installing the LED strip?

Before any installation, ensure the power source and the vessel's battery are disconnected or isolated. It is also recommended that a qualified professional performs the electrical and mechanical installation.

Where should the LUX SL180 light strip NOT be installed?

Although UV-resistant, the light strip must not be installed in areas exposed to strong direct sunlight. It is also not designed for permanent immersion in water.

What is the power consumption of the LUX SL180 LED strip?

The LUX SL180 LED light strip consumes 5 watts per meter.

What is the required input voltage for the LUX SL180 LED strip?

The LED strip requires an input voltage of 23 to 25V. It must be used only with Lumishore LUX LED strip controller modules.

Which lighting control systems is the LUX SL180 LED strip compatible with?

The LUX SL180 LED strip is designed for use exclusively with Lumishore LUX LED strip controller modules. It must not be connected to other third-party lighting control products or controllers, as this will void the warranty.

Is the LUX SL180 light strip supplied with its pilot?

The LUX SL180 light strip is designed to be used in conjunction with Lumishore LUX light strip controllers. The controller is not included with the light strip itself and must be purchased separately.

What is the warranty duration for the LUX SL180 LED light strip?

Lumishore Ltd guarantees its lighting systems, including the LUX SL180 LED strip, against manufacturing defects for a period of three years from the original purchase date.

In which cases can the warranty of the LUX SL180 LED strip be voided?

The warranty may be voided in cases of misuse, abuse, incorrect installation (non-compliance with installation guidelines), negligence, damage caused by disasters (e.g., fire, flood, storm, and lightning), installation by unqualified personnel, unauthorized repair or modification, or use of unapproved installations. Using third-party autopilots not from Lumishore will also void the warranty.

Is the LED strip ready to use or are additional accessories required?

The LED strip is supplied in pre-defined lengths and factory-sealed. However, it requires a Lumishore LUX LED strip controller module to operate, which is not included and must be purchased separately. Mechanical fasteners or mounting clips may be needed for some installations and are not included by default.