Sonde TA plastique HD-ID 500W (77/200kHz) et ClearVü™ 500W (455/800 kHz) + température - (8 broches) - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 18%

Garmin

010-01960-01

Sondă HD-ID / ClearVü cu montare prin traversare, plastic, 8 pini

La sonde Garmin 010-01960-01 est une sonde polyvalente à 8 broches, optimisée pour la pêche en eau douce, offrant les technologies sonar traditionnel HD-ID™ (77/200 kHz, 500W) et ClearVü™ (455/800 kHz CHIRP, 500W) avec un capteur de température intégré. Idéale pour les combinés Garmin compatibles, elle permet une visualisation claire des poissons et des structures sous-marines jusqu'à 579 mètres en mode traditionnel et 228 mètres en ClearVü. Ce produit est livré avec son kit de montage pour tableau arrière ou moteur électrique.

Prix publicBénéficier du tarif pro

702,84 RON

702,84 RON ~~859,67 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tehnologii de sondeu suportate	Sonar traditionnel (HD-ID), ClearVü (DownVü)
Frecvențe sonar	77/200 (Traditionnel), 455 (CHIRP ClearVü), 800 (CHIRP ClearVü)
Putere de vârf	500.0
Adâncime maximă de citire	579.0
Material sondă	Plastique
Tip conector sonar	8 broches
Senzor de temperatură integrat	Oui
Afișaje compatibile	Garmin ECHOMAP 50dv, 70dv, GPSMAP 5x7, 8x0, 10x0, 7600xsv Series, GSD 24, GSD 25, ECHOMAP 50s et autres appareils Garmin 8 broches compatibles avec les sonars traditionnel et ClearVü.
Tip de montaj	Tableau arrière, Moteur électrique
Unghi de acoperire al fasciculului	Traditionnel: 45°/15°, ClearVü: 2.5°x53° (455 kHz), 1.6°x29° (800 kHz)
Frecvență CHIRP înaltă	800-840
Frecvență CHIRP joasă	435-475
Clearvu Power W	500
Deadrise Angle Compensation	Réglable via support
Tip de pescuit	Eau douce, Pêche en eaux peu profondes
Senzor de viteză integrat	Non
Max Depth Traditional Sonar M	579
Veselărie de montaj inclusă	Oui
Operating Temperature Range C	-15 à 70
Peak Power W	500
Power Supply Voltage Range V	10-32
Anul lansării	2017.0
Sonar Connector Gender	Mâle
Storage Temperature Range C	-40 à 85
Transducer Form Factor	Mono-élément

Description détaillée

Concepută special pentru pescuitul în ape dulci, sonda Garmin 010-01960-01 este o soluție versatilă pentru amatorii de navigație care caută capacități precise de detecție. Acest model integrează un sonar tradițional HD-ID™ precum și tehnologia de scanare ClearVü™, oferind o vizualizare detaliată a structurilor și a peștilor sub ambarcațiune. Designul său permite instalarea flexibilă pe pupa sau pe un motor electric.

Performanțe detaliate ale sonarului

Sonda Garmin 010-01960-01 livrează o putere de 500 W pentru sonarul tradițional HD-ID™, operând pe frecvențe de 77/200 kHz cu lățimi de fascicul de 45° și respectiv 15°. Această configurație permite atingerea unei adâncimi maxime de 579 metri (1 900 picioare), furnizând arcade de pești clare și separare distinctă a țintelor. În completare, sonarul cu scanare ClearVü™ funcționează cu o putere de 500 W pe frecvențe CHIRP de 455 kHz (435-475 kHz) și 800 kHz (800-840 kHz). Lățimile de fascicul de 2.5°x53° la 455 kHz și 1.6°x29° la 800 kHz permit detectarea obiectelor și structurilor până la 228 metri (750 picioare) adâncime, oferind o imagine aproape fotografică a fundului marin. Un senzor de temperatură integrat cu răspuns rapid completează aceste funcționalități, furnizând date esențiale pentru analiza condițiilor de pescuit.

Instalare și conectivitate

Sonda este echipată cu un cablu de 6 metri (20 picioare) și un conector cu 8 pini, asigurând compatibilitate cu combinatoarele și traceoarele de hartă Garmin compatibile. Designul său permite montarea pe pupa pentru unghiuri între 0° și 70° sau pe motorul electric. Kit-ul de montare inclus facilitează instalarea pe diverse configurații de ambarcațiuni. Comparativ cu sondele monofrecvență sau doar tradiționale, această sondă se poziționează ca o opțiune echilibrată care oferă atât detecția clasică a peștilor, cât și vizualizarea detaliată a fundului, fără a atinge capacitățile de scanare laterală (SideVü) sau performanțele sondelor complexe "totul într-unul" precum seria GT50 sau GT52, nici performanțele în adâncime mare ale sondelor CHIRP dedicate. Este optimizată pentru medii de apă dulce, unde intervalele sale de frecvențe și adâncimi sunt deosebit de eficiente.

Documentations

Type	Nom
	Gabarit de montage - Gabarit de montage GT (EN)
	Notice d'installation - Guide de placement de la sonde (EN)
	Notice d'installation - Instructions d'installation sonde tableau arrière/moteur électrique (EN)

Avis de l'expert

Pol CONIN

Responsabil digital

« Analysis of the Garmin HD-ID and ClearVü 500W depth sounder for freshwater »

The Garmin 010-01960-01 transducer is a relevant solution for recreational boaters and freshwater anglers seeking an effective compromise between traditional detection and structural visualization. Its dual-frequency HD-ID beam (77/200 kHz) reliably detects fish schools and arches, while the ClearVü technology (455/800 kHz) provides near-photographic imaging of submerged structures, deadwood, and bottom variations. This combination is particularly useful for identifying fish-holding zones in moderate depths typical of lakes and rivers.

Installation on the transom or electric motor is a major advantage for flexibility. For transom mounting, it is critical to follow Garmin’s recommendations regarding positioning relative to the propeller and hull-generated turbulence. A 38 cm (15 in) offset from the propeller is recommended, along with installation on the starboard side if the propeller rotates clockwise, or port side if it rotates counterclockwise, to ensure a clean water flow for the sonar signal. For electric motor mounting, cable routing must be done carefully to avoid pinching during motor deployment or stowage. Although designed for relatively straightforward installation, precise positioning is key to achieving the optimal performance promised by these sonar technologies. This model is well-suited for small to mid-sized boats operating at moderate speeds, where clean water flow requirements can be more easily met than at high speeds.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Sondă HD-ID / ClearVü cu montare prin traversare, plastic, 8 pini

702,84 RON

702,84 RON ~~859,67 RON~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8416xsv - combinat GPS-ecou 16"

Ref : 010-02093-02

28.401,16 RON

28.401,16 RON ~~36.921,41 RON~~

Garmin

GPSMAP® 8410 - ecran traceur 10" cu hartă mondială

Ref : 010-02091-00

12.096,15 RON

12.096,15 RON ~~15.889,95 RON~~

Garmin

Antena GPS 24xd HVS NMEA 0183

Ref : 010-02316-00

1.337,63 RON

1.337,63 RON ~~1.724,65 RON~~

Receptor GPS și antenă 24xd NMEA 2000, alb

Garmin

Receptor GPS și antenă 24xd NMEA 2000, alb

Ref : 010-02316-10

1.364,92 RON

1.364,92 RON ~~1.724,65 RON~~

Garmin

Antena GPS GA 38

Ref : 010-12017-00

432,54 RON

432,54 RON ~~540,64 RON~~

Garmin

cardă microSD™/SD™: HXUS030R-Southeast Caribbean

Ref : 010-C0731-20

848,89 RON

848,89 RON ~~919,08 RON~~

Garmin

BlueChart® g3 HXEU008R - Golful Biscaya

Ref : 010-C0766-20

817,69 RON

817,69 RON ~~919,08 RON~~

Garmin

BlueChart® g3 HXEU009R - Portugal și nord-vestul Spaniei

Ref : 010-C0767-20

815,70 RON

815,70 RON ~~919,08 RON~~

Europa Centrală și de Vest - Hărți marine

Garmin

Europa Centrală și de Vest - Hărți marine

Ref : 010-C1354-30

1.205,46 RON

1.205,46 RON ~~1.351,62 RON~~

Garmin

Europa Centrală și de Vest - Hărți marine

Ref : 010-C1354-40

1.758,59 RON

1.758,59 RON ~~1.892,26 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

Which sonar technologies does this Garmin transducer use?

This Garmin transducer integrates two distinct sonar technologies:

The traditional HD-ID™ sonar, which provides clear fish arches and excellent target separation.The ClearVü™ scanning technology, which delivers near-photographic images of structures and fish beneath the vessel.

What are the frequencies and power ratings of the traditional HD-ID™ sonar?

The HD-ID™ traditional sonar of this sounder operates at 500 W power on frequencies of 77 kHz and 200 kHz. The corresponding beam widths are 45° for 77 kHz and 15° for 200 kHz.

What are the frequencies and power ratings of the ClearVü™ scanning sonar?

The ClearVü™ scanning sonar of this depth sounder uses 500 W of power on CHIRP frequencies of 455 kHz (range 435–475 kHz) and 800 kHz (range 800–840 kHz). The beam widths are 2.5°×53° at 455 kHz and 1.6°×29° at 800 kHz.

What is the maximum detection depth for HD-ID™ and ClearVü™ technologies?

The traditional HD-ID™ sonar can reach a maximum depth of 579 meters (1,900 feet). The ClearVü™ scanning sonar can detect objects and structures down to 228 meters (750 feet) in depth.

Does this transducer measure water temperature?

Yes, this transducer is equipped with a built-in fast-response temperature sensor that provides water temperature data.

Which type of fishing environment is this fishfinder primarily designed for?

This transducer is specifically designed for freshwater fishing, providing precise detection capabilities suited to this environment.

What is the connector type of this Garmin transducer?

This depth sounder is equipped with an 8-pin connector, ensuring compatibility with compatible Garmin displays.

What are the possible mounting types for this transducer?

This transducer is designed for versatile installation. It can be mounted on the transom of your boat or on an electric motor (trolling motor).

Which tools are required for installation on the transom?

For installation on the transom, you will need the following tools:

A #2 Phillips screwdriverA drillBits: 4 mm (5/32 in), 3.2 mm (1/8 in), and 25 mm (1 in)Masking tapeMarine sealant

How to choose the best location for installing the transducer on the transom?

For optimal performance, the transducer must be mounted parallel to the waterline and extend 3.5 mm (0.125 in) below a fiberglass hull or 10 mm (0.375 in) below an aluminum hull. It must be positioned as close as possible to the centerline of the transom, at least 38 cm (15 in) from the propeller, and away from any turbulence sources (strakes, fittings, water intakes).

How to avoid interference with the sonar signal?

To reduce interference, it is recommended to route the transducer cable away from ignition wires, batteries and service wires, trolling motor wires, and high-energy wires (radar, audio amplifier, autopilot pump). If the transducer cable must cross a power cable, orient them at 90 degrees.

Should antifouling paint be applied to the depth sounder?

Yes, if your boat spends a lot of time in the water, it is recommended to lightly sand the transducer and mounting hardware with a fine abrasive pad, clean them with isopropyl alcohol, then apply a water-based antifouling paint to prevent marine growth.

What is the required hole diameter if I need to run the cable through the transom?

If you use the 8-pin cable of this depth sounder, you will need to drill a 25 mm (1 inch) diameter hole through the transom for the cable to pass through. Make sure to apply marine sealant to seal the hole.

Does cutting the depth sounder cable void the warranty?

Yes, it is important not to cut the transducer cables, as this would void the warranty of your product.

How to test the installation of the depth sounder on the transom?

After installation, launch the boat and power on the display unit. Drive slowly, then gradually increase speed while monitoring the display. If the sonar signal is lost or degraded, note the speed. Adjust the transducer depth in small increments (about 3 mm / 1/8 in) if the signal improves while turning, or reposition the transducer as needed.

Is this transducer compatible with all hull materials?

Yes, transom-mount transducers like this one are compatible with all hull materials. They require constant contact with the water and are mounted on the outside of the transom.

Do I need to update the software on my Garmin display after installing this transducer?

Yes, it is necessary to update the software of your Garmin display when installing this transducer to ensure compatibility and optimal performance.

How to install the transducer on an electric motor (trolling motor)?

For installation on an electric motor, attach the mounting bracket to the transducer using the provided screws and star washers. Route the cable inside the bracket to an appropriate cable exit to prevent pinching. Then secure the bracket to the electric motor body using cable ties, positioning the transducer parallel to the bottom and securing the cable along the motor shaft with waterproof tape.