TIX402, Thru-Hull Flush Underwater Camera - Garmin

TIX402, caméra sous-marine encastrée traversante - visuel officiel Garmin 2

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 13%

Garmin

010-04355-00

TIX402, cameră submersibilă încastrată traversantă

La caméra sous-marine traversante Garmin TIX402 offre une visualisation Full HD 1080p avec un module interchangeable pour une maintenance aisée. Dotée d'une sortie HD-SDI ou composite et d'un boîtier en bronze IP68, elle est conçue pour une intégration directe sur les systèmes 12V CC, se distinguant des solutions IP plus complexes comme la série SY EYE. Le produit inclut le boîtier traversant, le module de caméra HD, l'écrou de blocage, la rondelle et le guide d'installation.

Prix publicBénéficier du tarif pro

7.360,39 RON

7.360,39 RON ~~8.538,07 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tensiune de funcționare	12
Consum electric maxim	3
Consum electric tipic	3
Calibru siguranță recomandat	1
Lățimea produsului	88
Înălțimea produsului	8
Adâncime produs	136
Indice IP	IP68
Rețea cablată	HD-SDI, Vidéo Composite (CVBS)
Conectivitate wireless	Aucune
Tip de montaj	Encastré traversant
Certificări	IP68
Rezoluția fluxului principal	Full HD 1080p
Rezoluția fluxului secundar	SD (NTSC/PAL)
Protocol de streaming	Signal vidéo direct
Dimensiune senzor	1/3
Tip senzor	CCD
Focală obiectiv	3.6
Unghiul de vizualizare	67
Capacitate vizualizare nocturnă	Oui
Sisteme compatibile	Écrans et systèmes de navigation compatibles HD-SDI ou vidéo composite (CVBS)
Tip conector DC	Jack 2.1 mm
Lungimea cablului	0.5
Tip de pescuit	Mer
Senzor de viteză integrat	Non
Senzor de temperatură integrat	Non
Anul lansării	2022
Nivel utilizator	Expert
Garantie	2

Accessoires

Cablu de alimentare/date

187,20 RON

187,20 RON ~~243,09 RON~~

Cumpără

Cablu rețea marin BlueNet 6m

189,88 RON

189,88 RON ~~243,09 RON~~

Cumpără

Kit prize RJ45 (set de 2)

72,94 RON

72,94 RON ~~80,98 RON~~

Cumpără

Description détaillée

Concepută pentru a oferi o vizualizare submersibilă detaliată, camera traversantă încastrată Garmin TIX402 (comercializată și sub referința Lumishore TIX402) este o soluție Full HD 1080p. Este destinată unei instalări discrete pe diverse tipuri de nave, de la ambarcațiuni sportive până la iahturi, oferind capacități de supraveghere și explorare sub linia de plutire.

Performanțe și specificații tehnice

Camera TIX402 integrează o rezoluție Full HD 1080p cu un obiectiv cu distanță focală fixă de 3,6 mm, oferind un unghi de vedere de 67 de grade. Necesită un iluminat minim de 0,01 lux pentru a funcționa eficient în condiții de lumină redusă. Pentru conectivitatea video, furnizează ieșiri HD-SDI (prin conector BNC) și compozit (NTSC/PAL prin conector BNC), permițând o integrare flexibilă cu sistemele de afișare existente. Alimentarea este asigurată de un curent continuu de 12 V, cu un consum electric de 3 W și un curent maxim de 0,25 A.

Concepție și instalare

Carcasa TIX402 este fabricată din bronz de calitate marină și este echipată cu o lentilă din borosilicat BK7 călită, garantând o protecție IP68 împotriva imersiunii și prafului. Dimensiunile compacte includ un diametru al feței de 88 mm (3,47 inci), un profil de 8 mm (0,32 inci) și o lungime a arborelui de 136 mm (5,35 inci). Instalarea traversantă încastrată este posibilă pe pupa, fund sau părțile laterale ale carenei, necesitând o gaură de intrare de 57 mm (2-1/4 inci). Un avantaj semnificativ al acestui model este modulul său de cameră HD interschimbabil și detașabil, permițând întreținerea sau înlocuirea din interiorul navei fără a fi necesară scoaterea acesteia din apă.

Funcționalități avansate și poziționare

Pentru optimizarea calității imaginii, TIX402 integrează Wide Dynamic Range (WDR), reducerea digitală a zgomotului 3D (3D-DNR) și un mod automat de lumină redusă. Aceste tehnologii contribuie la obținerea unor imagini clare și detaliate în medii submersibile variate. Spre deosebire de soluții mai complexe precum camerele IP din seria Lumishore SY EYE IP HD (referințe 60-0428, 60-0249), destinate superiahturilor și infrastructurilor Ethernet PoE, TIX402 se poziționează ca o opțiune de vizualizare HD-SDI/compozit directă. Este adecvată pentru aplicații care necesită transmisie video necomprimată prin cablu coaxial, fiind relevantă pentru o gamă largă de nave care nu solicită o integrare în rețea IP pentru video submersibil. Camera beneficiază de o garanție de 2 ani.

Documentations

Type	Nom
	Installation Manual - Lumi Cam TIX402 Camera Installation Manual
	Technical Document - Lumi Cam TIX402 Camera Specification Sheet
	Installation Manual - install SY Eye IP HD Camera Installation Manual
	Technical document - SY Eye IP HD Camera specification sheet

Avis de l'expert

Pol CONIN

Responsabil digital

« Technical analysis of the TIX402 underwater camera »

The Garmin TIX402 underwater camera, designed for flush-mounted through-hull installation, is a relevant solution for underwater visualization on vessels ranging from sportboats to yachts. Its main advantage lies in its HD module that can be removed from inside the hull. This feature significantly simplifies maintenance or replacement without requiring the vessel to be taken out of the water, a major economic and logistical consideration for owners.

For optimal installation, it is imperative to allow at least 17.8 cm (7 inches) of clearance inside the hull to enable module removal. The mounting must be done on a flat surface and requires precise drilling of 57 mm (2-1/4 inches). It is crucial to ensure proper grounding of the bronze housing to the vessel’s DC bonding system to maintain adequate galvanic protection; otherwise, the warranty may be void. Insulating sleeves are available separately for metal hulls, providing installation flexibility.

While models like the Lumishore SY EYE IP HD series cater to superyachts with IP video solutions, the TIX402 positions itself as a direct HD-SDI/composite option, ideal for integrations requiring uncompressed video transmission over coaxial cable. Each camera must be installed with a dedicated 1A fuse, and all electrical connections must be made in a watertight junction box to prevent water intrusion. Note that this model is powered solely by 12V DC and should be positioned away from high heat sources, such as engine exhausts, to ensure longevity.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

TIX402, cameră submersibilă încastrată traversantă

7.360,39 RON

7.360,39 RON ~~8.538,07 RON~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8410 - ecran traceur 10" cu hartă mondială

Ref : 010-02091-00

12.090,10 RON

12.090,10 RON ~~15.882,00 RON~~

Garmin

GPSMAP® 8416xsv - combinat GPS-ecou 16"

Ref : 010-02093-02

28.386,96 RON

28.386,96 RON ~~36.902,95 RON~~

Garmin

GPSMAP® 9010xsv - combina GPS-sondeu 10" premium

Ref : 010-03175-02

18.965,48 RON

18.965,48 RON ~~21.615,39 RON~~

Garmin

GPSMAP® 9013xsv - combinat GPS-sondeu 13" premium

Ref : 010-03176-02

24.996,03 RON

24.996,03 RON ~~29.721,18 RON~~

Garmin

GPSMAP® 9017xsv - combinat GPS-ecou sonor 17" de înaltă calitate

Ref : 010-03177-02

36.727,65 RON

36.727,65 RON ~~43.771,25 RON~~

Garmin

TD 50, ecran tactil de 5"

Ref : 010-02139-10

2.741,07 RON

2.741,07 RON ~~3.723,31 RON~~

Garmin

Sondă traversantă GDT™ 43 (adâncime/temperatură) și adaptor NMEA 2000

Ref : 010-01749-10

1.370,78 RON

1.370,78 RON ~~1.723,79 RON~~

Garmin

Sondă traversantă Garmin GST™ 43 + GST 10

Ref : 010-04284-00

856,83 RON

856,83 RON ~~1.129,45 RON~~

Receptor GPS și antenă 24xd NMEA 2000, alb

Garmin

Receptor GPS și antenă 24xd NMEA 2000, alb

Ref : 010-02316-10

1.364,24 RON

1.364,24 RON ~~1.723,79 RON~~

Garmin

Antena GPS 24xd HVS NMEA 0183

Ref : 010-02316-00

1.336,96 RON

1.336,96 RON ~~1.723,79 RON~~

Garmin

Antena GPS GA 38

Ref : 010-12017-00

432,33 RON

432,33 RON ~~540,37 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the video resolution of the TIX402 camera?

The TIX402 underwater camera delivers Full HD 1080p resolution. It also includes features such as Wide Dynamic Range (WDR) and 3D Digital Noise Reduction (3D-DNR) for optimal image quality.

What is the field of view of this underwater camera?

The TIX402 camera is equipped with a fixed 3.6 mm focal length lens providing a 67-degree field of view.

What materials is the TIX402 camera housing made of?

The TIX402 camera housing is made of marine-grade bronze, ensuring durability and resistance to the marine environment. The lens is made of hardened borosilicate glass BK7.

Is the TIX402 camera suitable for low-light conditions?

Yes, the TIX402 camera is designed to operate in low-light conditions. It features an automatic low-light mode and requires a minimum illumination of only 0.01 Lux.

What are the main dimensions of the TIX402 camera?

Main dimensions of the TIX402 camera are:

Housing face diameter: 88 mm (3.47 in)Housing profile height (protrusion): 8 mm (0.32 in)Shaft (rod) length: 136 mm (5.35 in)

What is the weight of the TIX402 underwater camera?

The TIX402 underwater camera weighs approximately 1.2 kg (2.6 lb).

What types of video outputs does the TIX402 camera provide?

The TIX402 camera provides two types of video output:

An HD-SDI output via a BNC connector. A Composite (SD) output via a BNC connector. These options allow flexibility in connecting to different display systems.

What hole diameter is required to install the TIX402 camera?

For installing the TIX402 camera, a 57 mm (2-1/4 inches) diameter hole must be drilled through the hull. Note that this size may vary if insulation sleeves are used.

On which types of hulls can the TIX402 camera be installed?

The TIX402 camera can be installed on GRP (glass-reinforced plastic or fiberglass) and wooden hulls. For installations on metal hulls, insulation sleeves are available and must be used.

At what depth below the water surface should the camera be installed?

Ideally, the TIX402 camera should be installed between 150 and 250 mm (6 to 10 inches) below the water surface. While this depth is not critical, it is recommended for optimal performance.

What type of sealing product is recommended for installation?

It is recommended to use an approved adhesive such as 3M 4200 Marine or a similar product. It must be applied generously and continuously around the circumference of the sealing groove and on the through-hull fitting stem.

Is it necessary to allow free space inside the hull for this camera?

Yes, it is essential to ensure there is a clearance of more than 17.8 cm (7 inches) inside the hull. This space is required to be able to remove the camera module if needed.

Should the TIX402 camera be grounded (bonded)?

Yes, all Lumishore cameras, including the TIX402, must be connected to the vessel’s DC bonding system to provide protection against electrolytic/galvanic corrosion. A grounding connection is provided on the housing.

Is the TIX402 camera supplied with a fuse?

Yes, the TIX402 HD camera module comes with an external fuse holder and two fuses. The correct fuse for a 12-volt power supply is a 1 A fuse. Each camera must be fused individually.

Is it possible to remove the camera module after it has been installed?

Yes, the TIX402 is an "interchangeable" camera, meaning the camera module can be removed from inside the hull. However, removal should only be done after consulting Lumishore and solely in case of camera failure or module upgrade.

Are there any precautions to take regarding the installation temperature of the camera?

Yes, the camera is sensitive to temperature. It must not be exposed to temperatures above 65°C (150°F). For example, avoid installing it near hot engine components or where exhaust emissions could be sprayed onto the camera.

What are the power supply requirements for the TIX402 camera?

The TIX402 camera operates exclusively on 12 Volts DC. Its power consumption is 3W, with a maximum current draw of 0.25 A per module.

Can the TIX402 camera be connected to any display?

The TIX402 camera has HD-SDI and Composite (SD) video outputs. It can be connected directly to a display compatible with these inputs. For HDMI displays, an HD-SDI to HDMI converter may be required.

What is the warranty duration for the TIX402 camera?

The TIX402 underwater camera is covered by a 2-year warranty. It is important to note that poor grounding of the cameras or unauthorized removal of the internal module will void the Lumishore warranty.