Sonar în timp real ActiveTarget2 - Sondă unică

When you purchase the ActiveTarget2 transducer alone (reference 000-15962-001), you receive only the transducer with its 7.62-meter cable. The ActiveTarget2 sonar module, specific mounting brackets (such as the transom mount), and compatible multifunction display are not included and must be purchased separately.

No, the ActiveTarget2 transducer is a critical component of the ActiveTarget2 real-time sonar system. It requires the ActiveTarget2 sonar module (sold separately) to function properly and transmit images to your compatible multifunction display.

The ActiveTarget2 transducer is compatible with the following Lowrance multifunction displays:

Lowrance HDS Live
Lowrance HDS Carbon
Lowrance Elite FS
These displays are required to view the real-time sonar images provided by the ActiveTarget2 system.

The ActiveTarget2 transducer weighs 1.21 kg (2.67 lbs).

The ActiveTarget2 transducer comes with a 7.62-metre (25-foot) cable.

Yes, the ActiveTarget2 transducer has an IP67 protection rating. This means it is fully protected against dust and can be submerged in water up to 1 meter deep for 30 minutes without damage.

The ActiveTarget2 transducer is designed to operate within a water temperature range of 0 °C to 35 °C (32 °F to 95 °F).

Yes, it is possible to install two complete ActiveTarget2 systems (two sonar modules and two transducers) on your boat to obtain synchronized dual views. The sonar modules are synchronized using the blue wire of the power cable and operate simultaneously without interference. You can install the transducers on the same electric motor bow thruster to obtain views such as "forward" and "scout".

The ActiveTarget2 system (which includes the transducer and sonar module) requires a 12 to 24 V DC power supply. The operating voltage range is 10.8 V DC to 31.2 V DC.

A 5 A fuse is recommended for the ActiveTarget2 system to ensure its electrical protection.

Yes, the ActiveTarget2 system includes reverse polarity protection, which helps prevent damage in case of incorrect power connection.

The ActiveTarget2 system enables real-time visualization modes for fish and structures. With a single transducer, you can typically switch between modes. With two complete systems, you can achieve synchronized dual views such as "Forward" and "Scout" modes simultaneously on the same screen.

Yes, the ActiveTarget2 transducer is designed to be installed on electric bow thrusters. The specifications mention the possibility of installing two transducers on the same electric bow thruster for dual views.

The ActiveTarget2 transducer represents an evolution of the first-generation ActiveTarget technology. It delivers improvements in image clarity and range, providing sharper and more detailed real-time underwater visualization.

When two ActiveTarget2 systems (two sonar modules and two transducers) are installed for dual views, the sonar modules are synchronized using a dedicated blue wire present in the power cable of each module. This synchronization allows both systems to operate simultaneously without interference.

Yes, the ActiveTarget2 transducer can be mounted on a transom. However, the transom mount is sold separately and is not included with the transducer alone.

The ActiveTarget2 system (including the transducer and sonar module) has a maximum current draw of 1.5 A at 13.8 V.

The ActiveTarget2 transducer can be stored within a temperature range of -30 °C to 70 °C (-22 °F to 158 °F).

No, the ActiveTarget2 transducer is designed specifically to be integrated with Lowrance systems. It is only compatible with certain Lowrance multifunction displays, such as the HDS LIVE, HDS Carbon, and Elite FS series, and cannot be used with displays from other brands.

This transducer is sold separately and cannot operate autonomously. To use it, you must associate it with the ActiveTarget2 sonar module (not included) and a compatible LOWRANCE multifunction display. The combination will provide real-time underwater imaging with high clarity.

Yes, it is entirely possible to install two complete systems (two fishfinder modules and two transducers) on your boat, for example on the same electric motor. This allows you to display synchronized dual views, such as Forward and Scout modes simultaneously on the same screen. Synchronization is achieved via the blue wire of the power cable, ensuring simultaneous operation without interference.

The ActiveTarget2 transducer weighs 1.21 kg and is fitted with a 7.62 m (25 ft) cable, providing ample flexibility for installation. It is designed to withstand harsh marine environments with an IP67 rating and can operate in water temperatures ranging from 0 °C to 35 °C.