ORA THX204, proiector submersibil alb

The ORA THX204 underwater light is equipped with 12 high-power 10 W LEDs, delivering a total of 6,100 lumens. It provides an ultra-wide 110° beam, creating a halo lighting effect around your vessel.

The ORA THX204 model provides intense and reliable white LED lighting, ideal for illuminating the water beneath your boat.

The ORA THX204 light is designed with a robust marine-grade bronze body and a borosilicate glass lens. These high-quality materials provide excellent resistance to marine environments, particularly salt corrosion.

The typical lifespan of the ORA THX204 underwater LED light LEDs is over 50,000 hours, ensuring prolonged and reliable use.

The ORA THX204 device has an IP68 waterproof rating, meaning it is fully protected against continuous immersion in water and against dust, making it perfectly suited for marine environments.

The ORA THX204 light consumes a maximum of 4.9 A at 12 V and 2.4 A at 24 V, with an average power of 59 W. It operates on a DC voltage of 12 V or 24 V, with an operating range of 10.5 to 31 VDC.

For installation of the ORA THX204 light, a 16.5 mm (21/32 in) hole must be drilled through the hull.

For optimal underwater lighting, it is recommended to install the ORA THX204 light between 100 and 300 mm (4 to 12 inches) below the minimum waterline of your boat.

For mechanical installation, you will need the following tools:

A drill and appropriate drill bitsMarine sealant (3M 4200 is recommended or equivalent)A 5 mm Allen keyRags for cleaning

The light must be mounted on a flat (non-curved) hull surface. For underwater installations, it is recommended to mount it only on the transom or on the side of the hull.

Yes, it is strongly recommended that a qualified professional carry out both the electrical and mechanical installation to ensure correct and safe installation.

To ensure watertightness, the exposed inner surface of the hull must be properly sealed to prevent water intrusion. Before inserting the light, apply a generous amount of marine sealant (3M 4200 Marine recommended) in a continuous bead around the sealing groove, on the base of the stem and on the shaft of the light passing through.

When installing three or more lights, equal spacing of 0.75 to 0.9 meters (2.5 to 3 feet) between each light is recommended to achieve uniform and consistent lighting.

The ORA THX204 navigation light is sensitive to temperature. It must not be placed near an exhaust outlet or any other significant heat source to prevent damage or performance degradation.

The ORA THX204 light is compatible with a 12 V or 24 V DC power supply. The operating voltage range is 10.5 to 31 VDC.

This underwater light is suitable for installation on boats up to 23 meters (80 feet) in length.

Yes, each ORA THX204 light must be individually protected by a fuse. Recommended fuse ratings are 6 A for a 12 V DC system and 4 A for a 24 V DC system.

LUMISHORE Ltd guarantees its lighting systems and associated accessories against manufacturing defects for a period of three years from the original purchase date.

The warranty may be voided in the following cases:

Improper use or abuse of the productIncorrect or negligent installationDamage caused by disasters (fire, flood, lightning)Installation by unqualified personnelUnauthorized repair or modificationFailure to comply with installation, maintenance, and usage instructions provided in the product documentation.

LUMISHORE lights require simple cleaning. Regularly check the light body and lens area to ensure they are free of marine growth. For cleaning, we recommend using a soft cloth or a soft-bristle brush. Do not use abrasive cleaning materials, solvents, acids, alkalis, high-pressure cleaners, or sandblasting equipment.