Bandă LED 60 leduri/m 5m 12V alb cald

This Mantagua LED strip emits a warm white light. Its color temperature is 3100 K, creating a warm and welcoming ambiance.

This LED strip is supplied as a 5-meter roll.

This LED strip integrates 60 LEDs per meter, ensuring uniform illumination along its entire length.

This tape uses 3528-type LEDs, known for their efficiency and reliability in lighting applications.

The Mantagua LED strip provides a luminous flux of 190 lumens per meter (190 lm/m), offering sufficient lighting for interior spaces.

This LED strip consumes 3.6 watts per meter (3.6 W/m), making it an energy-efficient lighting solution.

The estimated lifespan of this LED strip is 50,000 hours, provided a DC/DC regulator is used to stabilize the power supply and prevent voltage fluctuations.

This LED strip offers a 120° beam angle, ensuring wide and even light distribution, ideal for ambient or functional lighting.

The dimensions of this LED strip are 8 mm in width, 5000 mm (5 meters) maximum length, and 3 mm in thickness.

Yes, this product is an LED strip, which means it is inherently flexible and can be installed along curved surfaces or in tight spaces, making it easy to integrate into various layouts.

Yes, this LED strip is cuttable every 5 cm. This allows you to precisely adjust its length to your installation requirements.

This LED strip features a self-adhesive design, allowing for easy and quick installation on most clean and dry surfaces.

Yes, the tape comes with 10 cm of pre-installed electrical wires at each end, ready to be connected to your power system.

Yes, it is imperative to respect polarity when connecting this LED strip to ensure proper operation and avoid any damage. The wires are usually marked to facilitate this connection.

Using a DC/DC regulator is strongly recommended with this LED strip. It stabilizes the power supply and prevents voltage fluctuations, which optimizes the strip's lifespan up to 50,000 hours.

This LED strip requires a 12VDC power supply to operate correctly.

No, this LED strip has an IP20 protection rating. This means it is designed specifically for indoor use in dry, sheltered areas, away from direct moisture or water splashes.

Yes, this LED strip is perfectly suited for installation in interior boat environments such as cabins, saloons, or dry walkways, where it will not be exposed to direct moisture.

The main difference lies in the protection rating (IP). This tape (IP20) is designed for indoor use and offers no water protection. In contrast:

IP65 tapes are splash-proof and dust-resistant, suitable for damp indoor areas.IP68 tapes are fully waterproof and can be temporarily submerged, making them ideal for outdoor use or very humid environments.The 01201 model is a cost-effective and high-performance solution for dry indoor areas.

Yes, since it operates on 12VDC, this LED strip is compatible with most standard marine electrical systems that provide this voltage. Just ensure your system can supply the required power (3.6 W/m).