Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 14%

Mastervolt

77030500

Ieșire de contact multifuncțională

Le Multipurpose Contact Output Mastervolt est un relais CC programmable pour réseau MasterBus. Il permet de commander un équipement 12/24 V jusqu'à 1 A (ventilateur, alarme, contacteur groupe) en fonction d'événements configurés. La livraison comprend le module, le bornier à vis, le câble MasterBus, le terminateur MasterBus et le manuel d'utilisation.

Prix publicBénéficier du tarif pro

997,03 RON

997,03 RON ~~1.167,23 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tensiune nominală	30 V
Amperaj	1.0
Număr circuite	1.0
Număr de poli	1 pôle
Baterii suportate	0.0
Tip întrerupător baterie	Non applicable
Metodă control întrerupător baterie	Non applicable
Tip resetare siguranță	Non applicable
Tip siguranță automată	Non applicable
Curent nominal continuu al DVSR	0.0
Tip de montaj	Rail DIN
Indice IP	IP21
Tip ecran	Non applicable
Rețea cablată	MasterBus
Certificări	CE
Dimensiuni (L x H x P)	66 x 78 x 32
Greutate	0.08
Configurație contacte	NO-C-NC
Mărime șină DIN compatibilă	30
Afișare limbă	Anglais, Néerlandais, Allemand, Français, Espagnol, Italien, Danois, Suédois, Finnois, Norvégien
Indicator LED de stare	Oui
Manual inclus	Oui
Cablu MasterBus inclus	Oui
Tip conector MasterBus	Connecteur propriétaire MasterBus
Alimentare MasterBus	Non
Consum MasterBus (mW)	132
Terminator MasterBus inclus	Oui
Adâncime produs	32
Înălțimea produsului	78
Tipul produsului	Sortie contact multifonctions
Greutatea netă a produsului	80
Greutatea produsului ambalat	0.3
Lățimea produsului	66
Tensiune maximă a releului	30
Terminal cu șuruburi inclus	Oui
Intervalul de temperatură de depozitare	-30 à 70
Garantie	2

Accessoires

Cablu MasterBus 0,2 m

42,87 RON

42,87 RON ~~51,56 RON~~

Cumpără

Cablu MasterBus 0,5 m

51,34 RON

51,34 RON ~~59,33 RON~~

Cumpără

Cablu MasterBus 1 m

68,28 RON

68,28 RON ~~75,89 RON~~

Cumpără

Cablu MasterBus 3 m

73,85 RON

73,85 RON ~~83,98 RON~~

Cumpără

Cablu MasterBus 6 m

80,66 RON

80,66 RON ~~93,04 RON~~

Cumpără

Cablu MasterBus 10 m

87,94 RON

87,94 RON ~~109,60 RON~~

Cumpără

Cablu MasterBus 15 m

109,92 RON

109,92 RON ~~163,72 RON~~

Cumpără

Cablu MasterBus 25 m

164,37 RON

164,37 RON ~~252,53 RON~~

Cumpără

Cablu MasterBus 100 m

620,49 RON

620,49 RON ~~874,62 RON~~

Cumpără

Terminator MasterBus RJ45

24,06 RON

Cumpără

Description détaillée

Ieșirea de contact multifuncțională Mastervolt este un releu de curent continuu controlat prin magistrala de date MasterBus. Permite comandarea la distanță a echipamentelor de 12/24 V până la 1 A, precum un ventilator, o alarmă sonoră sau un grup electrogen, în funcție de evenimente configurabile pe rețea. Acest modul reprezintă o soluție simplă și fiabilă pentru adăugarea de funcții de control automatizat în instalația electrică de la bord.

Un releu programabil pentru automatizare la bord

Spre deosebire de un releu standard, acest modul se integrează în rețeaua MasterBus și poate fi controlat de orice echipament compatibil (încărcătorul Mass, MasterShunt, distribuitorul de curent continuu). Permite crearea de scenarii de automatizare: declanșarea unui ventilator de compartiment baterie când încărcătorul este în defect, activarea unei alarme sonore în caz de nivel scăzut al bateriei sau comandarea unui contactor pentru grup electrogen. Ieșirea de contact multifuncțională oferă funcții de temporizare (timp de funcționare minim/maxim) și un impuls de pornire de o secundă, esențiale pentru anumite grupuri. Se deosebește de modulele mai complexe de intrare/ieșire (precum Interfața Analogică MasterBus) prin simplitatea și costul redus, fiind dedicat unei singure funcții de comutare.

Instalare și integrare simplificate

Modulul se montează pe șină DIN de 30 mm și se conectează la rețeaua MasterBus prin cablul și conectorul furnizate. Dimensiunile reduse (66 x 78 x 32 mm) și consumul scăzut (132 mW) îl fac discret și economic. Instalarea constă în conectarea magistralei de date și racordarea circuitului de controlat la borna cu șurub (contact uscat NO/NC/COM, 1 A / 30 V CC). Configurarea evenimentelor se realizează de pe un ecran MasterBus sau prin intermediul software-ului MasterAdjust. Livrarea include borna cu șurub, cablul MasterBus, terminatorul MasterBus și manualul de utilizare.

Documentations

Type	Nom
	EN - User Manual - Multipurpose Contact Output
	EN - User Manual - Multipurpose Contact Output
	EN - User and Installation Manual - Multipurpose Contact Output

Avis de l'expert

Pol CONIN

Responsabil digital

« A compact smart relay for the MasterBus network »

The Multipurpose Contact Output is a small, very practical module for adding a controlled switching function to a MasterBus network. It is not a revolutionary product, but a reliable and proven basic component. Its main advantage is its simplicity: it replaces a classic relay with programmable control logic. It is ideal for simple tasks such as managing a battery compartment fan, activating an alarm, or controlling a small contactor. Caution: its dry contact is limited to 1 A and is not designed to switch high power directly. For this, it must be used as a pilot for a more powerful contactor. It is an excellent complement to Mass chargers and MasterShunt battery monitors for creating basic automation without breaking the bank.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Ieșire de contact multifuncțională

997,03 RON

997,03 RON ~~1.167,23 RON~~

Complétez votre installation avec des

Équipements complémentaires

Contrôleur de batterie MasterShunt 500 CZone

Mastervolt

Controler baterie MasterShunt 500 CZone

Ref : 77020115

1.779,95 RON

1.779,95 RON ~~1.979,74 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

How do I install the Multipurpose Contact Output on my MasterBus network?

Installing the Multipurpose Contact Output is straightforward. It mounts on a 30 mm DIN rail. Plug the MasterBus cables into the dedicated connector, then connect the wires from your equipment (fan, alarm, etc.) to the screw terminal, following the markings: input (1), normally closed output (2), and normally open output (3). The relay’s maximum current is 1 A.

Is this module compatible with all Mastervolt chargers?

Yes, the Multipurpose Contact Output is compatible with Mastervolt chargers equipped with the MasterBus data bus, such as the ChargeMaster or Mass Charger. It can be configured as a charger status interface (CSI) to trigger an action in case of a fault.

What is the maximum voltage that the relay contact can withstand?

The potential-free contact of the Multipurpose Contact Output can support a maximum voltage of 30 V DC and a maximum current of 1 A. It is designed for 12 V or 24 V applications.

Can I use this module to control a generator set?

Yes, this is a typical use case. The Multipurpose Contact Output can be configured to start and stop a generator. It includes a 1-second start pulse option required for certain generators, as well as minimum and maximum operating time delays.

What types of equipment can I order with this contact output?

You can order any 12/24 V equipment consuming less than 1 A, such as a battery compartment fan, a buzzer, an alarm, a generator set switch, or a power supply. The relay is a dry contact (NO/NC/COM).

How to configure the minimum operating time of the relay?

Configuration is done via the MasterBus menu. You can enable the 'Min. runtime' option and set the duration between 15 minutes and 45 days. The factory setting is 15 minutes.

Is this module compatible with the MasterShunt?

Yes, the Multipurpose Contact Output is compatible with the MasterShunt. You can, for example, configure an event so that the relay activates when the battery level is low, to start a generator.

What is the IP protection rating of this product?

The Multipurpose Contact Output has an IP 21 protection rating, meaning it is protected against access to hazardous parts by a finger and against vertically falling water droplets. It is suitable for installation inside the boat, in a dry location.

Can I change the device name in the MasterBus network?

Yes, you can customize the device name. By default, it is called 'DC Relay', but you can rename it with up to 12 characters via the configuration menu.

What does the LED indicator on the module mean?

The communication LED lights up when the relay state is 'activated'. It allows you to visually check if the relay is operating.

Can the Multipurpose Contact Output be used with a 24 V system?

Yes, the module is designed for 12 V and 24 V systems. The relay contact supports up to 30 V DC, making it perfectly suited for 24 V installations.

How to reset the Multipurpose Contact Output to factory settings?

Factory reset is generally performed via the MasterBus configuration software. Refer to the user manual for the exact procedure, as it may vary depending on the firmware version.

Can I use this module as an interface for a battery level alarm?

Yes, this is a common application. By configuring an event on a MasterShunt or another battery monitor, you can make the Multipurpose Contact Output trigger an audible or visual alarm when the battery voltage reaches a critical threshold.

Is the product delivered with the cable and MasterBus connector?

Yes, the delivery includes a MasterBus cable, a MasterBus connector, a screw terminal block, and the user manual. All the necessary components for a basic installation are provided.

How to set a one-second start pulse for a generator?

In the Multipurpose Contact Output configuration menu, enable the 'Puls. (1sec)' option (1 sec pulse). This will generate a one-second pulse when the relay is activated, which is required for certain generator starters.

Can I use this module to control a battery compartment fan?

Yes, this is a typical use case. You can set up an event on the Mass charger so that the relay activates a fan when the charger is running or in fault mode, to vent gases.