Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 13%

Navico

000-14027-001

Sondă Bullet Skimmer

La sonde NAVICO Bullet Skimmer (000-14027-001) est un transducteur tableau arrière essentiel pour les sondeurs Lowrance Hook² 4 et 4X, offrant un sonar broadband 200 kHz avec capteur de température. Conçue pour une installation simple et une couverture large, elle s'intègre parfaitement aux systèmes Autotuning des séries HOOK, Elite et Reveal. La sonde est livrée avec son câble intégré de 6 mètres.

Prix publicBénéficier du tarif pro

387,66 RON

387,66 RON ~~447,66 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tehnologii de sondeu suportate	CHIRP, Sonar 2D
Frecvențe sonar	83/200 kHz
Temperatură de funcționare	0°C à +50°C
Adâncime maximă de citire	304.0
Material sondă	Plastique
Tip conector sonar	Propriétaire Navico
Lungimea cablului	6.0
Senzor de temperatură integrat	Oui
Afișaje compatibile	Afficheurs Lowrance et Simrad compatibles CHIRP 83/200 kHz
Indice IP	IPX7
Conectivitate wireless	Non
Tip de montaj	Tableau arrière, moteur électrique avant, balayage au travers de la coque
Certificări	CE
Domeniu de măsurare temperatură	0°C à +50°C
Unghi de acoperire al fasciculului	38° à 83 kHz, 17° à 200 kHz
Frecvență CHIRP înaltă	200 kHz
Tip de pescuit	Mer, lac, rivière, traîne
Senzor de viteză integrat	Non
Nivel utilizator	Débutant
Garantie	2.0

Accessoires

Antena GPS ZG100

1.489,80 RON

1.489,80 RON ~~1.900,63 RON~~

Cumpără

Păsuire carenă, accesoriu P17

489,86 RON

489,86 RON ~~653,99 RON~~

Cumpără

Description détaillée

Sonda NAVICO Bullet Skimmer (000-14027-001) este un transductor de tablou de bord conceput special pentru a optimiza detectarea peștilor și cartografierea fundului pe combinatele Lowrance HOOK². Ideală pentru modelele HOOK² 4 și HOOK² 4X, această sondă oferă o soluție fiabilă și performantă pentru pescuitul de coastă și în ape dulci, poziționându-se ca o alternativă economică și eficientă față de transductoarele mai complexe precum TripleShot sau SplitShot, care integrează tehnologiile DownScan și SideScan. Spre deosebire de acestea, Bullet Skimmer se concentrează pe un sonar broadband standard, fără suport CHIRP, pentru o utilizare simplificată.

Performanțe Sonar și Specificații Tehnice

Sonda Bullet Skimmer funcționează pe o frecvență de 200 kHz, unele variante suportând și 83/200 kHz pentru un sonar standard. Oferă un unghi de fascicul de 40 de grade la 200 kHz, asigurând o acoperire sonar de aproximativ două ori mai mare decât transductoarele tradiționale. Această caracteristică facilitează localizarea peștilor și a structurilor subacvatice. Adâncimea maximă atinsă este de 152 metri (500 picioare) la 200 kHz, fiind astfel perfect adaptată aplicațiilor tipice de pescuit. Un senzor de temperatură integrat furnizează date esențiale pentru analiza condițiilor de pescuit. Sonda cântărește 0,11 kg (0,24 lbs) fără cablu, fiind echipată cu un cablu de 6 metri (19,5 picioare) cu un conector specific Hook² 4x, asigurând o integrare transparentă cu unitățile compatibile.

Concepție și Instalare

Fabricată dintr-o carcasă din plastic de calitate marină, durabilă și etanșă, sonda NAVICO Bullet Skimmer este proiectată pentru a rezista în medii marine de apă dulce și sărată. Temperatura de funcționare variază de la 0°C la +50°C, iar temperatura de depozitare de la -30°C la +70°C. Opțiunile de montaj sunt versatile, incluzând tabloul de bord, motorul electric din față sau o instalare prin carenă. Pentru un montaj optim, se recomandă un flux de apă neperturbat, evitând zonele din spatele virurilor de degajare. Găurile de ghidaj recomandate pentru șuruburi au diametrul de 10 mm, cu Ø 3,7-4,0 mm (5/32") pentru materiale moi precum placajul și Ø 4,1-4,7 mm (3/16") pentru materiale rigide precum fibră de sticlă sau lemn dur. Integrarea cu funcția Autotuning a sonarelor HOOK² simplifică experiența utilizatorului prin ajustarea automată a setărilor pentru performanțe optime.

Documentations

Type	Nom
	EN - Guide d'installation - Bullet Skimmer Sonde
	FR - Guide d'installation - Bullet Skimmer Sonde

Avis de l'expert

Pol CONIN

Responsabil digital

« Bullet Skimmer Fishfinder: the essential for Lowrance Hook² »

The NAVICO Bullet Skimmer transducer (reference 000-14027-001) is an efficient and affordable solution for users of the Lowrance HOOK² range, including the 4 and 4X models. Its specificity lies in its standard broadband sonar approach at 200 kHz (or 83/200 kHz), which, while not supporting CHIRP technology, offers a 40-degree beam coverage. This beam width is a clear advantage for rapid echo detection, doubling the scanning area compared to traditional transducers and making it easier to identify fish schools and submerged structures down to 152 meters. The inclusion of a temperature sensor is an added benefit for analyzing water layers. Its installation in the transom is simplified thanks to its robust marine-grade plastic design, capable of withstanding freshwater and saltwater environments, with a 6-meter cable. For optimal deployment, it is crucial to ensure positioning in a laminar water flow, away from turbulence generated by the hull. This is a strategic choice for those seeking reliability and ease of use for basic fishing needs, without the complexity of advanced imaging technologies.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Sondă Bullet Skimmer

387,66 RON

387,66 RON ~~447,66 RON~~

Complétez votre installation avec des

Équipements complémentaires

B&G Traceur de cartes Zeus 3S 12" avec carte de base du monde

B&G Traceur de cartes Zeus 3S 12" avec carte de base du monde - photo 2

B&G

Plotter cartografic Zeus 3S 12" cu hartă de bază mondială

Ref : 000-15412-002

21.528,72 RON

21.528,72 RON ~~25.802,20 RON~~

B&G Pack Zeus 3S, traceur 9", Radar HALO 20+

B&G Pack Zeus 3S, traceur 9", Radar HALO 20+ - photo 2

B&G

Pachet Zeus 3S, traceur 9", radar HALO 20+

Ref : 000-15563-001

22.364,75 RON

22.364,75 RON ~~29.237,40 RON~~

Lowrance

Eagle 7" (Lowrance)

Ref : 000-16230-001

2.129,31 RON

2.129,31 RON ~~2.718,42 RON~~

Lowrance

Traceur Elite FS 7

Ref : 000-15702-001

4.603,02 RON

4.603,02 RON ~~5.508,21 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What are the main features of the NAVICO Bullet Skimmer depth sounder?

The NAVICO Bullet Skimmer (000-14027-001) transducer is a transom-mounted depth sounder designed specifically for fish detection and bottom mapping. It uses standard broadband sonar and operates at a frequency of 200 kHz. It also includes a temperature sensor for essential data.

What is the operating frequency of this depth sounder?

The Bullet Skimmer transducer operates at a single frequency of 200 kHz for standard broadband sonar. This model does not support 83/200 kHz or CHIRP frequencies.

Does the Bullet Skimmer transducer support CHIRP technology?

No, the NAVICO Bullet Skimmer (000-14027-001) sonar focuses on standard broadband sonar and does not support CHIRP technology.

What is the maximum depth this depth sounder can reach?

The Bullet Skimmer transducer can reach a maximum depth of 152 meters (500 feet) when operating at 200 kHz.

What is the beam angle of the Bullet Skimmer depth sounder?

The Bullet Skimmer transducer offers a 40-degree beam angle at 200 kHz, providing sonar coverage approximately twice as wide as traditional transducers.

Does the NAVICO Bullet Skimmer transducer include a temperature sensor?

Yes, the Bullet Skimmer fishfinder is equipped with an integrated temperature sensor, providing essential data for analyzing fishing conditions.

What are the operating and storage temperatures of the depth sounder?

The transducer can operate within a temperature range of 0°C to +50°C (32°F to +122°F) and be stored between -30°C and +70°C (-22°F to +158°F).

What is the maximum speed at which the boat can travel for optimal performance of the depth sounder?

The Bullet Skimmer transducer is designed to operate optimally up to a maximum speed of 60 knots (approximately 70 mph).

Which displays is the NAVICO Bullet Skimmer depth sounder compatible with?

The NAVICO Bullet Skimmer transducer is specifically designed and optimized for Lowrance HOOK² combos. It is ideal for HOOK² 4 and HOOK² 4X models.

What type of connector does this transducer have?

The Bullet Skimmer transducer is equipped with a specific Hook² 4x connector, ensuring seamless integration with compatible Lowrance HOOK² displays.

Is this depth sounder suitable for freshwater and coastal fishing?

Yes, this transducer is ideal for inshore fishing and freshwater use, providing a reliable and high-performance solution for these environments.

What are the mounting options available for the Bullet Skimmer depth sounder?

The Bullet Skimmer transducer offers several mounting options:

On the boat's transom.On an electric bow thruster.Through-hull mounting (shoot-thru-hull).

What is the ideal mounting location for the depth sounder on the boat?

The ideal mounting location for the transducer is in an area where the water flow is undisturbed, to ensure optimal performance and accurate sonar readings.

Are there any areas to avoid when mounting the depth sounder?

Yes, it is not recommended to mount the transducer beyond the chine, as this could disrupt water flow and affect sonar performance.

What are the recommended hole diameters for installation?

The recommended pilot hole diameters for screws of 10 mm diameter depend on the hull material:

For soft materials (e.g., plywood): Ø 3.7–4.0 mm (5/32"). For rigid materials (e.g., fiberglass, acrylic, hardwood): Ø 4.1–4.7 mm (3/16").

Can the transducer be installed in "shoot-thru-hull" mode (through the hull) on all types of hulls?

No, shoot-thru-hull transducers cannot operate effectively through wooden hulls.

Should a sealing product be used during installation?

Yes, it is recommended to apply a high-quality marine-grade sealant/adhesive, suitable for use above or below the waterline, to the mounting holes to ensure watertightness and the durability of the installation.

Is this transducer an alternative to DownScan or SideScan transducers?

Yes, the Bullet Skimmer transducer is a cost-effective and efficient alternative to more complex transducers like TripleShot or SplitShot, which include DownScan and SideScan technologies. It focuses on standard broadband sonar for simplified use.