ST60+ Placă de circuit imprimat WIND PCB/DIAL ASSY

This is the main electronic board coupled with the dial assembly, specifically designed for the Raymarine ST60+ Wind anemometer display.

This component resolves common faults such as:

Analog needle malfunction or freezing.LCD screen display issues.Loss of communication with the network or wind sensor.

Yes, part number A28004-P includes both the printed circuit board (PCB) and the dial assembly (DIAL ASSY) for the ST60+ Wind instrument.

Absolutely, this is an original Raymarine spare part, which guarantees quality and reliability identical to your original equipment.

Yes, this part is designed for ST60 displays. The printed circuits of the ST60 and ST60+ generations share the same internal design, with differences being mainly cosmetic.

No, each type of instrument has its own electronic circuit board. This model is exclusively for the ST60+ Wind display (anemometer and vane anemometer).

Replacement requires opening the housing and handling sensitive electronic components. While it is possible to do it yourself, it is strongly recommended to have a qualified technician perform the work to avoid damaging the part.

When reassembling your ST60+ Wind display, it is crucial to check the condition of the housing's waterproof gasket. If it is worn, it must be replaced, and the screws must be tightened evenly to prevent water ingress.

Yes, since you are replacing the electronic core of the display, it will be necessary to perform a new calibration of your wind transducer / vane anemometer (alignment of apparent wind and alarm settings) by following the manual of your ST60+.

Yes, if the LCD screen of your ST60+ Wind instrument is unreadable, damaged, or leaking liquid crystals (black spots), replacing this complete assembly (PCB + dial with screen) will resolve the issue.

Yes, the printed circuit board includes the necessary components to ensure bidirectional communication via the SeaTalk 1 network used by Raymarine instruments of this generation.

The ST60+ range has not been manufactured by Raymarine for several years. Spare parts such as this circuit board are therefore classified as obsolete, and their availability is limited to the remaining stock on the market.

The assembly includes the dial mechanism (DIAL ASSY), but you will generally need to carefully retrieve and reinstall the physical needle from your old display onto the new mechanism.

Yes, the printed circuit board manages all the functions of the display, including power supply and control of the night-time backlighting of the LCD screen and the analog dial.

Unscrew the rear housing, carefully disconnect the ribbon cables (without pulling sharply) and remove the PCB retaining screws. Work on a clean, static-free surface.

No, this circuit is specifically programmed to interpret the analog signals from Raymarine wind sensors at masthead compatible with the ST60/ST60+ series.

You will mainly need small precision crosshead screwdrivers to open the housing and detach the printed circuit board. A precision tweezers can also be useful for handling small internal connection ribbons.

Absolutely. Replacing only the faulty circuit of your ST60+ Wind Wind transducer allows you to preserve your current installation, maintaining the same aesthetics and SeaTalk compatibility without having to invest in a next-generation system.

If the needle is offset, you must perform the wind transducer alignment procedure (linearization) detailed in the Raymarine ST60+ Wind user manual, typically by sailing head-to-wind.

The PCB is factory-treated (tropicalized varnish) to resist marine environments. However, the integrity of the display housing and its gasket is what ensures the overall waterproofing of the unit.