Raymarine Câble d'adaptation (8 vers 25) sonde CP370 sur Axiom RV

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 14%

Raymarine

A80489

Cablu de adaptare (8 către 25) sondă CP370 pe Axiom RV

Câble adaptateur officiel Raymarine A80489 permettant de connecter une sonde 8 broches, compatible avec le module sondeur CP370, sur un écran multifonctions de la gamme Axiom RV équipé d'un port 25 broches. C'est la solution indispensable pour moderniser votre électronique tout en conservant votre sonde existante.

Inclus : Uniquement le câble adaptateur.

Prix publicBénéficier du tarif pro

361,48 RON

361,48 RON ~~421,50 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tip de conector	Raymarine 8 broches vers 25 broches
Tip cablu	Câble adaptateur de sonde
Lungimea cablului	0.5
Rețea compatibilă	Raymarine Sonar (Propriétaire)
Temperatură de funcționare	-25 à +55
Temperatură depozitare	-30 à +70
Direcție adaptor	Sonde 8 broches (CP370) vers MFD 25 broches (Axiom RV)
Aplicație cablu	Adaptation sonde CP370 vers écran Axiom RV
Certificări	CE
Culoare	Noir
Număr de conductori	8.0
Material conductor	Cuivre étamé
Tip conector A	Raymarine 8 broches (Sonde)
Tip conector B	Raymarine 25 broches (Axiom RV)
Mecanism de blocare a conectorului	Bague filetée
Tip curent	DC
Flexibilitate	Flexible
Amplasament instalare	Derrière la console / tableau de bord
Material manta	PVC
Tensiune maximă	30.0
Rază de curbură minimă	50
Consum electric tipic	N/A
Conectoare pre-montate	Oui, 1x 8 broches, 1x 25 broches
Secțiune (AWG)	24.0
Secțiune (mm²)	0.2
Ecranare	Blindé
Tip ecranare	Tresse et feuille
Signal Type Adapted	Sondeur traditionnel / CHIRP (50/200 kHz)
Supported Sonar Frequencies	50 kHz, 200 kHz
Rezistență UV	Oui
Indice de etanșeitate	IPX6
Greutate	0.18
Finisaj conductor	Étamé
Wiring Standard	Raymarine propriétaire

Accessoires

Cablu SeaTalk NG / Devicenet NMEA2000 femelă (400mm)

264,58 RON

264,58 RON ~~291,81 RON~~

Cumpără

Cablu Seatalk NG 0,4m

214,69 RON

214,69 RON ~~226,96 RON~~

Cumpără

Cablu de ramificație SeaTalk NG 1 metru

224,71 RON

224,71 RON ~~259,39 RON~~

Cumpără

Cablu 10m RayNet F către RayNet F

807,42 RON

807,42 RON ~~843,00 RON~~

Cumpără

Description détaillée

Cablul de adaptare Raymarine A80489 reprezintă soluția indispensabilă pentru proprietarii de ambarcațiuni care doresc să modernizeze electronica de navigație. Acesta permite conectarea unei sonde existente, inițial proiectată pentru un modul sonar Raymarine CP370, direct la un ecran multifuncțional din gama Axiom RV. Adaptatorul asigură o tranziție fluentă între generațiile de echipamente, protejând astfel investiția inițială într-o sondă de calitate.

Compatibilitate și conexiune

Acest cablu convertește specific conectorul cu 8 pini al sondelor compatibile cu modulul CP370 într-un conector cu 25 de pini, necesar pentru porturile "RealVision 3D + 1kW" ale MFD-urilor Axiom RV. Prin utilizarea acestui adaptor, păstrați capacitățile sondei tradiționale în timp ce beneficiați de interfața și funcționalitățile avansate ale noului dvs. ecran Axiom RV. Este o soluție plug-and-play care simplifică semnificativ instalarea și evită necesitatea înlocuirii unei sonde deja instalate, o operațiune adesea complexă și costisitoare.

Poziționare în gama Raymarine

Spre deosebire de adaptoarele în Y sau de cablurile de extensie, A80489 are o funcție de conversie foarte specifică. Se deosebește de alte cabluri precum A80488 (care adaptează o sondă CP370 la un Axiom DV) prin conectorul său cu 25 de pini, dedicat exclusiv modelelor Axiom RV. Este o piesă esențială pentru a garanta retrocompatibilitatea în cadrul ecosistemului Raymarine, permițând o modernizare progresivă a sistemului dvs. de navigație și detectare a peștilor.

Avis de l'expert

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Cablu de adaptare (8 către 25) sondă CP370 pe Axiom RV

361,48 RON

361,48 RON ~~421,50 RON~~

Complétez votre installation avec des

Équipements complémentaires

Raymarine

Kit de montaj din spate pentru AXIOM 12" Inclus etriere spate și fixare

Ref : R70534

311,91 RON

311,91 RON ~~324,23 RON~~

Raymarine

Placă de adaptare AXIOM 12 pentru decupaj C120/E120 Classic

Ref : A80529

572,31 RON

572,31 RON ~~616,04 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What exactly is this A80489 adapter cable used for?

This A80489 adapter cable connects an existing marine transducer with an 8-pin connector (originally designed for a Raymarine CP370 sounder module) to a Raymarine Axiom RV series multifunction display, which has a 25-pin sounder port.

I have a transducer that was connected to a CP370 module. Can I connect it to my new Axiom RV using this cable?

Yes, that is precisely the function of this adapter. It was designed to allow users to keep their CP370-compatible transducer (8-pin connector) when upgrading to an Axiom RV display (25-pin port), thus avoiding the need to replace the transducer.

By using this adapter, will I have RealVision 3D functions with my old transducer?

No. This adapter allows your traditional transducer to display classic 2D fishfinder data on your Axiom RV display. It cannot add features that the transducer does not already have. To use DownVision, SideVision, or RealVision 3D technologies, you must use a transducer specifically designed for them.

Is the installation of this cable complicated?

No, installation is very simple and 'plug-and-play'. Simply connect the cable from your transducer (8-pin connector) to the corresponding end of the adapter, then screw the other end (25-pin connector) into the 'RealVision 3D' port located at the rear of your Axiom RV display.

Do I need to perform any specific configuration on my Axiom RV after connecting the cable?

Generally, the Axiom RV display automatically detects the type of connected transducer. However, it is recommended to check in the sounder settings that the correct transducer model is selected from the list to ensure optimal performance.

Will water temperature data be transmitted?

Yes, if your original transducer (CP370-compatible) is equipped with a temperature sensor, this adapter will transmit temperature data to your Axiom RV display without any issues.

Can I use this cable to connect a transducer from another brand than Raymarine?

This adapter is specifically designed for the Raymarine ecosystem. It is intended to connect Raymarine transducers (or Airmar-compatible transducers for Raymarine) with an 8-pin connector to Raymarine Axiom RV displays. Use with other brands is not guaranteed and could damage your equipment.

Is the connection watertight and secure?

Yes, both connectors are equipped with a threaded locking ring that ensures a secure and watertight connection, designed to withstand marine environments and vibrations.

What is the advantage of using this cable instead of replacing the transducer?

The main advantage is economic and practical. It allows you to keep your existing depth sounder, which is often expensive and complex to install (especially through-hull models), while benefiting from the performance and interface of a latest-generation multifunction display.

Will this adapter work with a CHIRP transducer?

This adapter will work with traditional transducers (non-CHIRP or single-function CHIRP) that were compatible with the CP370 module. It will transmit the transducer signal to the Axiom RV, which will be able to interpret it.

How to identify the depth sounder port on my Axiom RV?

At the rear of your Axiom RV display, the depth sounder port is clearly identified. It is the largest round connector, with 25 pins, often labeled 'TRANSDUCER' or 'RealVision 3D'.

Is this cable necessary if I buy a new RealVision 3D transducer with my Axiom RV?

No. If you purchase a new Raymarine RealVision 3D transducer, it will come with the appropriate 25-pin connector for direct connection to your Axiom RV. This A80489 adapter cable is only needed if you want to reuse an old 8-pin transducer.