Cable adaptateur Raymarine A80484 Axiom DV 9 broches vers 7 broches

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 11%

Raymarine

A80484

Cablu de adaptare (7 pini către 9 pini) pentru conectarea directă a sondei ax7/eSx7 la MFD Axiom DV

Le câble d'adaptation Raymarine A80484 est une pièce de rechange essentielle pour connecter une sonde 7 broches aux écrans multifonctions Axiom DV 9 broches. Il assure la compatibilité entre les sondes des anciennes gammes Raymarine (aX7/eSx7) et les MFD Axiom DV actuels, fonctionnant sous LightHouse 4. Cet accessoire permet de réutiliser votre sonde existante lors d'une mise à niveau de votre écran. Le produit inclut le câble adaptateur 7 broches vers 9 broches.

Prix publicBénéficier du tarif pro

371,29 RON

371,29 RON ~~421,50 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tip de conector	7 broches vers 9 broches
Tip cablu	Câble adaptateur
Lungimea cablului	0.3
Rețea compatibilă	Connexion sonde Raymarine propriétaire
Rețea cablată	Propriétaire Raymarine (sonde)
Tensiune de funcționare	30 V DC
Temperatură de funcționare	-15°C à +55°C
Temperatură depozitare	-20°C à +70°C
Certificări	CE
Tipul produsului	Câble d'adaptation
Modele compatibile	Écrans multifonctions Raymarine Axiom DV, Axiom+, Axiom Pro, Axiom 2 Pro (pour sondes des séries aX7/eSx7)

Accessoires

Sondă de lipit cu fascicul conic HIGH CHIRP, unghi 0/12/20°, CPT-S, cablu 6 m

968,89 RON

968,89 RON ~~1.069,97 RON~~

Cumpără

Rallonge Raymarine A80273 4 m pour sondes CPT-S, CPT100, CPT110 et CPT120

Cablu prelungitor 4 m pentru sonde CPT-S, CPT100, CPT110 & CPT120

260,83 RON

260,83 RON ~~291,81 RON~~

Cumpără

Raymarine Étriers pour montage arrière Axiom R70528 - Comptoir ...

Kit de montaj din spate pentru AXIOM 12" Inclus etriere spate și fixare

311,91 RON

311,91 RON ~~324,23 RON~~

Cumpără

Cablu de ramificație SeaTalk NG 1 metru

224,71 RON

224,71 RON ~~259,39 RON~~

Cumpără

Cablu SeaTalk NG / Devicenet NMEA2000 femelă (400mm)

264,58 RON

264,58 RON ~~291,81 RON~~

Cumpără

Cablu 1.5m SeaTalk NG SPUR F / conector Devicenet NMEA 2000 M

235,27 RON

235,27 RON ~~259,39 RON~~

Cumpără

Cablu 1 metru SeaTalk NG F / DeviceNet (NMEA 2000) F)

294,01 RON

294,01 RON ~~324,23 RON~~

Cumpără

Cablu (antena RayStar 130) racord Seatalk NG 6 metri

384,20 RON

384,20 RON ~~421,50 RON~~

Cumpără

Cablu 10m RayNet F către RayNet F

807,42 RON

807,42 RON ~~843,00 RON~~

Cumpără

Plaque adaptation Raymarine A80529 pour Axiom 12 vers decoupe C120/E120 Classic

Placă de adaptare AXIOM 12 pentru decupaj C120/E120 Classic

572,31 RON

572,31 RON ~~616,04 RON~~

Cumpără

Description détaillée

Proiectat pentru a asigura compatibilitatea între generațiile de echipamente Raymarine, cablul de adaptare A80484 permite conectarea directă a unei sonde cu 7 pini la un afișaj multifuncțional (MFD) Axiom DV echipat cu un port cu 9 pini. Acest cablu este destinat în mod specific utilizatorilor care doresc să conecteze sonde utilizate anterior cu MFD-uri din seria aX7 sau eSx7 la noile ecrane Axiom DV. Astfel, se facilitează o actualizare a sistemului fără a necesita înlocuirea sondei existente.

Compatibilitate și integrare Raymarine

Cablul A80484 se integrează în ecosistemul Raymarine, în special cu MFD-urile Axiom care funcționează sub sistemul de operare LightHouse 4. În timp ce ecranele aX7 și eSx7 sunt modele mai vechi, acest cablu prelungește durata de viață a sondelor compatibile cu 7 pini, permițându-le să fie utilizate cu gama Axiom DV. Această soluție de conectivitate este esențială pentru proprietarii de ambarcațiuni care efectuează o tranziție către tehnologiile DownVision (DV) ale MFD-urilor Axiom, păstrând în același timp senzorii sonar funcționali.

Specificații tehnice: Raymarine A80484

Acest cablu adaptor este o piesă de schimb sau de îmbunătățire pentru sistemele de navigație Raymarine. El convertește o conexiune de sondă de 7 pini către formatul cu 9 pini, necesar pentru ecranele Axiom DV. Această adaptare este crucială pentru exploatarea funcțiilor sonar DownVision pe MFD-urile Axiom care nu dispun de porturi native cu 7 pini. Gama Axiom, incluzând modelele Axiom+, Axiom Pro și Axiom 2 Pro, beneficiază de această flexibilitate de conectare pentru integrarea sondelor existente.

Documentations

Type	Nom
	FR - Manuel d'utilisation - Câble d'adaptation (7 broches vers 9 broches) sonde branchement direct ax7/eSx7 MFD sur AXIOM DV

Avis de l'expert

Pol CONIN

Responsabil digital

« Compatibility solution for Raymarine 7-pin transducers to Axiom DV »

The Raymarine A80484 adapter cable is a critical component for boat owners planning to upgrade their navigation system. It addresses a common need: reusing a functional Raymarine 7-pin transducer with an Axiom DV series MFD, which uses a 9-pin connector. This solution avoids the expense of a new transducer when only the multifunction display is being replaced.

From an installation standpoint, this cable offers notable simplicity. It connects directly between the existing transducer and the new Axiom DV MFD without requiring complex wiring modifications or specific software configurations at the adapter level. Its role is purely electrical and pinout-related. It is particularly relevant for recreational boaters or anglers equipped with older-generation DownVision transducers compatible with aX7 or eSx7 MFDs who wish to leverage the performance and user interface of Axiom displays.

It is important to note that the A80484 is a pinout adapter. It does not add new sonar capabilities to a non-DownVision transducer but ensures data transmission from a 7-pin DV transducer to a 9-pin Axiom DV MFD. Its application is therefore specific and does not extend to transducers from other brands or different pinout configurations.

Durabilité

Facilité d'installation

Rapport performance / prix

Pièces de rechange

Cablu prelungitor 4 m pentru sonde CPT-S, CPT100, CPT110 & CPT120

260,83 RON

260,83 RON ~~291,81 RON~~

Cumpără

Kit de montaj din spate pentru AXIOM 12" Inclus etriere spate și fixare

311,91 RON

311,91 RON ~~324,23 RON~~

Cumpără

Placă de adaptare AXIOM 12 pentru decupaj C120/E120 Classic

572,31 RON

572,31 RON ~~616,04 RON~~

Cumpără

Sondă de lipit cu fascicul conic HIGH CHIRP, unghi 0/12/20°, CPT-S, cablu 6 m

968,89 RON

968,89 RON ~~1.069,97 RON~~

Cumpără

Cablu 10m RayNet F către RayNet F

807,42 RON

807,42 RON ~~843,00 RON~~

Cumpără

Câble Adaptateur Femelle Devicenetraymarine A06045

Cablu adaptor STNG magistrală femelă către DeviceNet femelă 400 mm

224,44 RON

224,44 RON ~~259,39 RON~~

Cumpără

Interfață Micro-Talk fără fir Micronet către SeaTalkNG (Wind Wireless)

1.664,03 RON

1.664,03 RON ~~1.945,39 RON~~

Cumpără

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Cablu de adaptare (7 pini către 9 pini) pentru conectarea directă a sondei ax7/eSx7 la MFD Axiom DV

371,29 RON

371,29 RON ~~421,50 RON~~

Complétez votre installation avec des

Équipements complémentaires

Raymarine

AIS 700 CLASĂ B cu SPLITTER de antenă integrat

Ref : E70476

7.055,29 RON

7.055,29 RON ~~7.749,14 RON~~

Raymarine

Indicator Digital i50 Tridata

Ref : E70060

3.065,36 RON

3.065,36 RON ~~3.534,13 RON~~

Raymarine

Afișaj multifuncțional Raymarine i70s

Ref : E70327

3.663,82 RON

3.663,82 RON ~~3.858,36 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Raymarine A80484 adapter cable used for?

The Raymarine A80484 adapter cable is designed to connect a Raymarine 7-pin transducer, originally used with aX7 or eSx7 series multifunction displays (MFD), to an Axiom DV MFD that requires a 9-pin connection. It allows you to keep your existing transducer when upgrading your system.

With which Raymarine Axiom display models is the A80484 cable compatible?

This cable is compatible with Raymarine Axiom series multifunction displays (MFD) featuring a 9-pin port for DownVision (DV) transducers. This includes specifically the Axiom, Axiom+, Axiom Pro, and Axiom 2 Pro models.

Which Raymarine transducers can be connected via this adapter cable?

The A80484 cable allows connection of Raymarine transducers equipped with a 7-pin connector. These transducers were typically used with multifunction displays (MFD) from the Raymarine aX7 and eSx7 series.

Does this cable allow me to use the DownVision function on my Axiom DV display?

Yes, cable A80484 is specifically designed to facilitate the operation of DownVision (DV) sonar functions on Axiom MFDs. It allows an existing 7-pin transducer to transmit the data required to Axiom DV displays, which require a 9-pin connection for this technology.

How is the A80484 adapter cable connected?

The A80484 adapter cable plugs in directly. It has one connector for the 7-pin transducer and another for the 9-pin port on the Raymarine Axiom DV multifunction display (MFD). Installation is straightforward and requires no special tools beyond standard connections.

Why should I use cable A80484 instead of buying a new depth sounder?

Using cable A80484 is an economical and practical solution if you upgrade your multifunction display (MFD) to an Axiom DV model and already have a functional Raymarine 7-pin transducer. It extends the lifespan of your existing transducer by making it compatible with the new Axiom DV display technologies, avoiding the cost and effort of replacing the transducer.

What are the connector types on the Raymarine A80484 adapter cable?

The Raymarine A80484 adapter cable is equipped with a 7-pin female connector to connect to the existing transducer and a 9-pin male connector to plug directly into the transducer port on the Axiom DV multifunction display (MFD).

Is A80484 cable compatible with LightHouse 4 OS on Axiom MFDs?

Yes, cable A80484 is designed to integrate with the Raymarine ecosystem, particularly with Axiom multifunction displays (MFD) running the LightHouse 4 operating system. It enables these MFDs to communicate with compatible 7-pin transducers.