Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 4%

Raymarine

D230

Cablu SeaTalk 40 cm

Conçu pour étendre les réseaux SeaTalk 1 existants, ce câble Raymarine D230 de 40 cm est une solution de connectivité pour les équipements marins legacy. Il permet une intégration simple des instruments compatibles SeaTalk 1. Inclus : le câble Raymarine SeaTalk de 40 cm.

Prix publicBénéficier du tarif pro

247,76 RON

247,76 RON ~~259,39 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Număr de conductori	3.0
Culoare	Noir
Tensiune maximă	30.0
Ecranare	Blindé
Flexibilitate	Flexible
Tip curent	DC
Curent nominal	3.0
Material manta	PVC résistant aux UV
Material conductor	Cuivre étamé
Certificări	CE
Finisaj conductor	Étamé
Tip cablu	Câble de commande
Lungimea cablului	0.4
Rețea compatibilă	SeaTalk 1
Conectoare pre-montate	Oui
Amplasament instalare	Intérieur de navire, entre instruments
Aplicație cablu	Interconnexion d'instruments, extension de réseau
Temperatură de funcționare	-20°C à +70°C
Temperatură depozitare	-30°C à +80°C
Rază de curbură minimă	25
Tip de conector	Propriétaire SeaTalk 1 (3 broches)
Tip ecranare	Tresse
Rezistență UV	Modérée
Tipul produsului	Câble d'interconnexion

Accessoires

Conector în T SeaTalk NG

149,20 RON

149,20 RON ~~162,12 RON~~

Cumpără

Conector 5 căi SeaTalk NG

250,54 RON

250,54 RON ~~259,39 RON~~

Cumpără

Cablu de ramificație SeaTalk NG 1 metru

224,71 RON

224,71 RON ~~259,39 RON~~

Cumpără

Cablu magistrală SeaTalk NG 0.4m

209,12 RON

209,12 RON ~~226,96 RON~~

Cumpără

Cablu dorsal SeaTalk NG Raymarine, lungime 1 metru

209,71 RON

209,71 RON ~~226,96 RON~~

Cumpără

Cablu SeaTalk NG / Devicenet NMEA2000 femelă (400mm)

264,58 RON

264,58 RON ~~291,81 RON~~

Cumpără

Câble Adaptateur Femelle Devicenetraymarine A06045

Cablu adaptor STNG magistrală femelă către DeviceNet femelă 400 mm

224,44 RON

224,44 RON ~~259,39 RON~~

Cumpără

Kit Convertisseur STNG vers NMEA183 VHF (1xR52131, 2xA06031, 2xA06032, 1xA80265, 1xA06049, 1xA06039)

Kit convertor STNG către NMEA183 VHF (1xR52131, 2xA06031, 2xA06032, 1xA80265, 1xA06049, 1xA06039)

755,27 RON

755,27 RON ~~843,00 RON~~

Cumpără

Interfață Micro-Talk fără fir Micronet către SeaTalkNG (Wind Wireless)

1.664,03 RON

1.664,03 RON ~~1.945,39 RON~~

Cumpără

Description détaillée

Proiectat pentru extinderea și conectarea în cadrul rețelelor SeaTalk 1 de Raymarine, cablul SeaTalk D230 de 40 cm este un component esențial pentru instalațiile existente. Acest cablu permite interconectarea instrumentelor sau prelungirea unei secțiuni de magistrală SeaTalk 1 pe o distanță scurtă, asigurând comunicarea între dispozitivele compatibile. Cu o lungime de 400 mm, este adaptat configurațiilor în care echipamentele sunt apropiate.

Conectivitate și Poziționare

Sistemul SeaTalk 1, deși înlocuit de arhitecturi mai noi precum SeaTalkNG (compatibil NMEA 2000) și SeaTalkhs (Ethernet), rămâne prezent pe numeroase nave echipate cu instrumente Raymarine de generație veche. Cablul D230 se poziționează ca o soluție de mentenanță și optimizare pentru aceste sisteme. Spre deosebire de cablurile SeaTalkNG care utilizează conectori specifici și un protocol NMEA 2000, D230 este dedicat interfeței proprietare SeaTalk 1, caracterizată prin simpla sa cablare cu trei fire. Nu permite o conexiune directă la rețelele NMEA 2000 fără un convertor specific, precum un convertor SeaTalk către SeaTalkNG. Acest cablu este deci indispensabil pentru a menține sau modifica o rețea SeaTalk 1 fără a necesita o reconfigurare completă a instalației electronice de bord.

Integrare și Funcționalitate

Integrarea cablului D230 într-o rețea SeaTalk 1 este simplă, reprezentând o extensie directă. Asigură transmiterea datelor de navigație și de instrumentație între dispozitive precum afișajele multifuncționale, piloții automatici sau instrumentele de vânt și adâncime compatibile SeaTalk 1. Proiectat pentru fiabilitate în mediul marin, oferă o soluție de conectivitate sigură pentru ambarcațiunile al căror sistem electronic de bord se bazează pe această arhitectură testată de Raymarine.

Avis de l'expert

Pol CONIN

Responsabil digital

« SeaTalk cable 40cm Raymarine: extension for legacy networks »

The Raymarine SeaTalk D230 40 cm cable is an essential component for marine electronic installations based on the SeaTalk 1 protocol. It is not intended for new NMEA 2000 or SeaTalkNG installations, but rather a connectivity piece to maintain or extend existing networks. Its use case lies in connecting nearby SeaTalk 1 instruments or extending a short bus segment. It is particularly useful for boats equipped with older Raymarine electronics where a full upgrade to NMEA 2000 is not planned or necessary for certain components.

In terms of installation, this cable is plug-and-play for SeaTalk 1 systems. It is important to note that its use is limited to SeaTalk 1-compatible devices. For integration with modern systems (SeaTalkNG/NMEA 2000), a dedicated converter is required. The 40 cm length is designed for very short connections, avoiding unnecessary cable lengths and simplifying routing in confined spaces. It is therefore chosen for its compatibility and precise function within a specific network architecture.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Cablu SeaTalk 40 cm

247,76 RON

247,76 RON ~~259,39 RON~~

Complétez votre installation avec des

Équipements complémentaires

Raymarine

Indicator Digital i50 Tridata

Ref : E70060

3.065,36 RON

3.065,36 RON ~~3.534,13 RON~~

Raymarine

Afișaj i50 Depth sonor

Ref : E70059

2.780,57 RON

2.780,57 RON ~~3.209,90 RON~~

Raymarine

Indicator i50 Speed

Ref : E70058

2.985,99 RON

2.985,99 RON ~~3.209,90 RON~~

Raymarine

Afișaj i60 vânt

Ref : E70061

3.027,41 RON

3.027,41 RON ~~3.209,90 RON~~

Raymarine

Afișaj multifuncțional Raymarine i70s

Ref : E70327

3.663,82 RON

3.663,82 RON ~~3.858,36 RON~~

Raymarine

Senzor calculator EV1 Evolution

Ref : E70096

5.304,11 RON

5.304,11 RON ~~5.998,29 RON~~

Raymarine

AIS 700 CLASĂ B cu SPLITTER de antenă integrat

Ref : E70476

7.055,29 RON

7.055,29 RON ~~7.749,14 RON~~

Raymarine

Pilot automat ST1000+

Ref : A12004

3.273,88 RON

3.273,88 RON ~~3.663,82 RON~~

Émetteur-récepteur VHF avec ASN Ray 90 (Inc combiné, HP Passif et câble)

Raymarine

Emisie-recepție VHF cu ASN Ray 90 (inclus combinat, difuzor pasiv și cablu)

Ref : E70492

5.574,27 RON

5.574,27 RON ~~5.803,75 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the exact length of the Raymarine D230 cable?

The Raymarine D230 cable has a length of 40 centimeters (400 mm). This dimension is ideal for short connections between closely spaced instruments within a SeaTalk 1 network.

Which Raymarine network type is this cable intended for?

This cable is specifically designed for Raymarine SeaTalk 1 networks. It allows interconnection of instruments or extension of a SeaTalk 1 bus section.

Is the D230 cable compatible with SeaTalkNG systems?

No, the D230 cable is not directly compatible with SeaTalkNG systems. It is designed for SeaTalk 1 networks. To connect SeaTalk 1 devices to a SeaTalkNG network, a specific converter (such as a SeaTalk to SeaTalkNG converter) is required.

Can I use this cable for an NMEA 2000 network?

No, this cable is not directly compatible with an NMEA 2000 network. SeaTalk 1 is a proprietary Raymarine protocol, distinct from NMEA 2000. A conversion via an adapter is required for any interconnection.

Is this cable an original Raymarine product?

Yes, the D230 cable is an original Raymarine component, designed to ensure compatibility and optimal performance within the brand's SeaTalk 1 systems.

How does the D230 cable integrate into a SeaTalk 1 installation?

Integrating the D230 cable is straightforward. It connects directly between two compatible SeaTalk 1 instruments or to extend an existing bus section. It ensures data and power transmission between devices.

What types of information are transmitted over a SeaTalk 1 cable?

SeaTalk 1 cables transmit navigation and instrumentation data between devices. This includes information from multifunction displays, autopilots, wind instruments, depth sounders, speed instruments, and many others, provided they are SeaTalk 1 compatible.

Is D230 cable suitable for marine environments?

Yes, this cable is designed to be reliable and durable in a marine environment. Its design is intended to withstand typical conditions encountered at sea, ensuring stable connectivity for onboard electronics.

Can I use this cable to extend an existing SeaTalk 1 cable?

Yes, the 40 cm D230 cable is ideal for extending a SeaTalk 1 bus section or for interconnecting instruments when distances are short and equipment is close together.

Which connectors are used by the SeaTalk 1 D230 cable?

The SeaTalk 1 system uses proprietary three-wire connectors. These connectors are specific to the SeaTalk 1 protocol and differ from those used for SeaTalkNG or NMEA 2000.

Is it possible to cut and re-wire this cable if the length is not optimal?

While it is technically possible to modify a SeaTalk 1 cable, it is strongly recommended to use standard-length cables to ensure network integrity and avoid data or power transmission issues. Any modification could compromise the reliability of your system.

Can this cable be used to power SeaTalk 1 devices?

Yes, the SeaTalk 1 system is a bus that transmits both data and electrical power. The D230 cable therefore allows the transmission of the power required by SeaTalk 1-compatible instruments connected to the network.

What is the difference between SeaTalk 1 and SeaTalkNG?

The main differences are:

SeaTalk 1: This is an older proprietary Raymarine protocol, using three-wire cabling and specific connectors. It transmits data and power.SeaTalkNG: This is a newer architecture based on the NMEA 2000 protocol. It uses different connectors (often Spur, Backbone types) and offers higher bandwidth.The D230 cable is only for SeaTalk 1.

Is the D230 cable required for a new installation or rather for an extension?

The D230 cable is primarily used for extending or modifying an existing SeaTalk 1 network. For a new installation, it would connect SeaTalk 1 instruments to each other if this architecture is selected.

Is this cable compatible with older Raymarine instruments?

Yes, the D230 cable is specifically designed to be compatible with older Raymarine instruments that use the SeaTalk 1 protocol. It is essential for maintaining and optimizing these systems.

Are there length limits for a SeaTalk 1 network using this type of cable?

Yes, like any data network, SeaTalk 1 has total length limits to ensure reliable transmission. Although this 40 cm cable is short, it contributes to the total bus length. It is recommended to consult Raymarine’s technical documentation for the maximum specifications of the SeaTalk 1 network.

Can multiple D230 cables be connected together to achieve a greater length?

Yes, it is possible to connect several SeaTalk 1 cables, including the D230, together to extend the network range. However, it is important to respect the recommended maximum lengths for the SeaTalk 1 bus to avoid any signal degradation.

Is the D230 cable shielded to prevent interference?

Raymarine SeaTalk 1 cables are designed to operate in the marine electromagnetic environment. While exact shielding specifications are not always detailed for each short cable, they are manufactured to minimize common interference in a properly configured SeaTalk 1 system.

Is the D230 cable a data cable or a power cable?

The D230 cable is both a data and power cable. The SeaTalk 1 system is a combined bus that transmits digital information between instruments and also provides the electrical power required for their operation.

Can this cable be used to connect a Raymarine multifunction display to other instruments?

Yes, if your Raymarine multifunction display and other instruments are compatible with the SeaTalk 1 protocol, this D230 cable can be used to interconnect them and enable the transmission of navigation data between them.