Cable Y Raymarine A102146 pour modules de sonde CHIRP CP470 et CP570

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 10%

Raymarine

A102146

Cablu Y CP470/CP570

Conçu pour les modules sondeur CHIRP Raymarine CP470 et CP570, le câble Y A102146 permet de connecter deux transducteurs à un seul module, étendant les capacités de détection sous-marine. Il s'agit d'une pièce de rechange essentielle pour optimiser les installations professionnelles. Inclus : 1x Câble Y Raymarine A102146.

Prix publicBénéficier du tarif pro

347,71 RON

347,71 RON ~~389,08 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tip de conector	Connecteur sondeur propriétaire Raymarine
Tip cablu	Câble de sondeur
Lungimea cablului	0.5
Rețea compatibilă	Connexion sondeur propriétaire
Indice IP	IPX6
Certificări	CE
Tipul produsului	Câble
Modele compatibile	Raymarine CP470, Raymarine CP570

Description détaillée

Cablul Y A102146 de la Raymarine este un accesoriu esențial conceput pentru a extinde capabilitățile modulelor de sondă CHIRP CP470 și CP570. Acest cablu permite conectarea a două traductoare la un singur modul de sondă, optimizând astfel acoperirea și flexibilitatea sistemului dvs. de detecție submarină. Este indispensabil pentru configurațiile care necesită utilizarea simultană a mai multor traductoare, de exemplu pentru a combina frecvențe diferite sau unghiuri de fascicul variate.

Integrare și performanță

Proiectat special pentru modulele CP470 și CP570 de la Raymarine, acest cablu Y asigură o compatibilitate electrică și mecanică perfectă. Modulele CP470 și CP570 sunt recunoscute pentru performanțele lor CHIRP de vârf, oferind discriminare a țintelor și rezoluție a fundului marin. Adăugarea cablului Y permite exploatarea deplină a acestor tehnologii, permițând configurații avansate de traductoare, în timp ce sistemele mai simple, precum Dragonfly sau Element, permit doar o singură conexiune directă.

Flexibilitate în instalații

Acest cablu Y oferă o soluție pentru instalațiile complexe unde accesul la module este limitat sau când se dorește maximizarea informațiilor sonar din mai multe puncte. Este o piesă detașată specifică gamei de module de sondă profesionale Raymarine, deosebindu-se de accesoriile generice prin proiectarea și integrarea sa în ecosistemul Raymarine. Se adresează utilizatorilor care doresc o modularitate crescută a sistemului lor de sondă CHIRP.

Avis de l'expert

Pol CONIN

Responsabil digital

« Dual-transducer integration for CP470 and CP570 »

The Raymarine A102146 cable is a key technical component for demanding CHIRP CP470 and CP570 fishfinder installations. Its practical value lies in enabling the integration of two transducers on a single fishfinder module. This setup is particularly relevant for vessels requiring diversified sonar coverage, such as simultaneous use of a high-frequency transducer for structure detection and a low-frequency transducer for deep water depth and fish finding.

In terms of installation scenarios, this cable is essential when only one CP470 or CP570 module is available but the operator wants to benefit from two separate transducers, for example a hull-mounted and a transom transducer, or two transducers optimized for different depths. It simplifies wiring by avoiding the addition of a second complete fishfinder module, which is an advantage in terms of space and cost compared to a dual-module solution. Check compatibility of the transducers with the frequencies supported by the CP470 or CP570 modules to ensure optimal performance.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Cablu Y CP470/CP570

347,71 RON

347,71 RON ~~389,08 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Raymarine A102146 Y-cable used for?

This Y-cable is an essential accessory designed to extend the capabilities of the Raymarine CP470 and CP570 CHIRP fishfinder modules. It allows you to connect two transducers to a single fishfinder module, optimizing coverage and flexibility in your underwater detection system.

Which Raymarine fishfinder modules is this Y-cable compatible with?

The Y A102146 cable is specifically designed to be compatible with Raymarine CP470 and CP570 CHIRP fishfinder modules.

Can I connect two transducers with different frequencies using this Y-cable?

Yes, one of the main advantages of this Y-cable is that it allows advanced configurations, including the simultaneous use of multiple transducers with different frequencies or beam angles for better coverage.

Is this cable compatible with Raymarine Dragonfly or Element fishfinders?

No, this Y cable is not compatible with basic fishfinder systems such as the Raymarine Dragonfly or Element. It is specifically designed for CHIRP fishfinder modules CP470 and CP570.

What is the advantage of using a Y-cable for my CHIRP fishfinder system?

Using the Y-cable allows you to optimize coverage and flexibility in your fishfinder system by connecting two transducers to a single module. This enables advanced configurations, such as combining different frequencies or beam angles, to maximize sonar data and improve target discrimination as well as seabed resolution.

How is the Y Raymarine A102146 cable installed on my depth sounder module?

The Y-cable connects to the input of the Raymarine CP470 or CP570 fishfinder module. Both 'Y' ends of the cable are then connected to the two transducers you wish to use. It ensures perfect electrical and mechanical compatibility with these modules.

Can this Y-cable be used with transducers from different brands?

This Y-cable is a specific spare part for Raymarine's professional fishfinder module range and is designed for optimal integration within the Raymarine ecosystem. To ensure maximum performance and compatibility, it is recommended to use it with compatible Raymarine transducers.