Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 9%

Raymarine

R28171

Cap de catarg lung separat

Conçue comme pièce de rechange, la tête de mât longue Raymarine R28171 est un composant mécanique essentiel pour les capteurs de vent Raymarine existants. Sa conception "longue" permet une mesure optimale en réduisant les interférences en tête de mât. Elle est destinée à la réparation et à la maintenance des systèmes de girouette/anémomètre Raymarine, notamment pour les transducteurs de la gamme ST290. Aucune information sur les accessoires inclus n'est spécifiée.

Prix publicBénéficier du tarif pro

3.239,65 RON

3.239,65 RON ~~3.568,33 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Rețea cablată	N/A (pièce mécanique)
Sisteme compatibile	Raymarine ST290, systèmes de mesure du vent Raymarine compatibles
Tip anemometru	À coupelles et girouette
Materialul ansamblului	Plastique stabilisé aux UV
Material carcasă	Plastique stabilisé aux UV
Înălțimea produsului	803.5
Tensiune de funcționare	N/A (pièce mécanique)
Consum electric maxim	N/A (pièce mécanique)
Lungimea cablului	N/A (pièce de rechange, sans câble fourni)
Compatibilitate girouetă-anemometru	Raymarine ST290
Lățimea produsului	345.5
Adâncime produs	68
Perioadă de garanție	2 ans
Lungimea periscopului vertical	0.6
Consum electric tipic	N/A (pièce mécanique)
Echivalent încărcare NMEA 2000 (LEN)	N/A (pièce mécanique)
Temperatură de funcționare	-15°C à +55°C
Calibru siguranță recomandat	N/A (pièce mécanique)
Indice IP	IPX6
Distanță de siguranță față de busolă	N/A (pièce mécanique)
Tip de montaj	En tête de mât
Certificări	CE,IEC 60945

Accessoires

Cablu 30 metri și conector pentru vârf de catarg

881,17 RON

881,17 RON ~~973,18 RON~~

Cumpără

Conector în T SeaTalk NG

149,27 RON

149,27 RON ~~162,20 RON~~

Cumpără

Conector 5 căi SeaTalk NG

250,67 RON

250,67 RON ~~259,52 RON~~

Cumpără

Cablu dorsal SeaTalk NG Raymarine, lungime 1 metru

209,81 RON

209,81 RON ~~227,08 RON~~

Cumpără

Cablu magistrală SeaTalk NG 3 m

224,56 RON

224,56 RON ~~259,52 RON~~

Cumpără

Cablu dorsal SeaTalk NG 5 m

296,94 RON

296,94 RON ~~324,39 RON~~

Cumpără

Cablu magistrală SeaTalk NG Raymarine, lungime 9 metri

339,84 RON

339,84 RON ~~389,27 RON~~

Cumpără

Cablu magistrală SeaTalk NG 0.4m

209,22 RON

209,22 RON ~~227,08 RON~~

Cumpără

Cablu de ramificație SeaTalk NG 1 metru

224,82 RON

224,82 RON ~~259,52 RON~~

Cumpără

Description détaillée

Capul de catarg lung Raymarine R28171 este un component mecanic de schimb destinat sistemelor de măsurare a vântului. Asigură funcția de giruetă și anemometru, captând direcția și viteza vântului aparent. Designul său „lung” este special adaptat pentru a optimiza măsurătorile la înălțime, reducând interferențele potențiale ale echipamentelor sau structurilor din capul catargului.

Componentă esențială pentru măsurarea vântului

Acest cap de catarg este o piesă de schimb crucială pentru întreținerea senzorilor de vânt Raymarine, în special pentru sistemele mai vechi precum ST290, care necesită elemente modulare. Spre deosebire de unitățile integrate mai noi (de exemplu, senzorii de vânt Raymarine i60 sau i70s care sunt ansambluri complete), R28171 se adresează utilizatorilor care doresc să înlocuiască doar partea mecanică superioară a senzorului de vânt, fără a schimba întregul traductor electronic. Permite restabilirea funcționalității unui sistem existent fără costurile unui înlocuire completă.

Optimizarea preciziei vântului aparent

Avantajul unui cap de catarg lung constă în capacitatea sa de a poziționa senzorii (giruetă și cupolele anemometrului) mai departe de turbulențele generate de catargul însuși sau de alte echipamente instalate în capul catargului (antene VHF, lumini de navigație). Această înălțare contribuie la o citire mai precisă și stabilă a vântului aparent, esențială pentru navigația cu vele și optimizarea performanțelor. Astfel, R28171 reprezintă o alegere tehnică pentru navigatori care doresc să mențină sau să îmbunătățească fidelitatea datelor de vânt din instalația lor Raymarine.

Documentations

Type	Nom
	EN - Plan technique - Tête de mât longue seule

Avis de l'expert

Pol CONIN

Responsabil digital

« Raymarine R28171 long masthead transducer: a critical spare part for wind measurement »

The Raymarine R28171 tall masthead unit is not a complete wind measurement system, but a critical mechanical spare part. Its value lies in its ability to keep existing Raymarine wind transducer systems operational, potentially for ranges such as the ST290, without requiring a costly full electronics replacement. The "tall" design is a significant technical advantage, particularly for performance sailboats or medium to large units. Indeed, it allows the wind transducer and vane anemometer sensors to be raised above turbulence zones created by the mast, antennas, or navigation lights.

Installing this masthead unit requires working at height, often on the mast itself, which involves specific safety precautions and potentially professional intervention. While the electrical connection to the existing transducer is usually straightforward, the mechanical mounting demands precision to ensure correct orientation and durable fastening. This component is best suited for targeted repairs rather than new installations, where complete and integrated solutions (e.g., NMEA 2000 masthead units) may be preferable.

It is important to note that this part is a passive mechanical component and does not replace the electronic transducer that converts movements into digital signals. Its selection is driven by the need to replace a damaged element (broken vane, missing cups) on a compatible Raymarine installation, rather than by a desire to enhance the intrinsic functional performance of the wind measurement system.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Cap de catarg lung separat

3.239,65 RON

3.239,65 RON ~~3.568,33 RON~~

Complétez votre installation avec des

Équipements complémentaires

Raymarine

Afișaj i60 vânt

Ref : E70061

3.028,93 RON

3.028,93 RON ~~3.211,50 RON~~

Raymarine

Afișaj multifuncțional Raymarine i70s

Ref : E70327

3.665,65 RON

3.665,65 RON ~~3.860,29 RON~~

Raymarine

Pachet i50 & i60 Vânt, Viteză, Adâncime

Ref : E70153

11.335,83 RON

11.335,83 RON ~~12.002,58 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Raymarine R28171 masthead unit used for?

The Raymarine R28171 long masthead unit is an essential mechanical spare part for wind measurement systems. It provides wind direction and speed data by functioning as both a vane anemometer, accurately capturing apparent wind.

What is the advantage of the "long" design of this masthead?

The "long" design of this masthead is specifically adapted to optimize high-altitude measurement. It allows positioning the sensors (wind vane and anemometer cups) further away from turbulence generated by the mast itself or other equipment installed at the masthead (such as VHF antennas or navigation lights). This elevation contributes to more accurate and stable apparent wind readings.

Is the R28171 masthead sensor a complete wind sensor?

No, the Raymarine R28171 long masthead is a mechanical spare part. It is designed to specifically replace the upper section (wind vane and anemometer) of an existing wind sensor, without including the full electronic transducer or the connection cable.

Which Raymarine systems is this masthead unit compatible with?

This masthead unit is primarily designed for servicing wind sensors associated with older Raymarine systems, particularly those requiring modular components such as the ST290 system. It restores the functionality of an existing system by replacing the upper mechanical assembly.

Is this masthead compatible with Raymarine i60 or i70s wind sensors?

No, the long masthead R28171 is not compatible with newer integrated wind sensors such as the Raymarine i60 or i70s. These systems are complete units and are not designed to use modular components like the R28171.

Which wind data are measured by this masthead sensor?

Once correctly installed and connected to a compatible Raymarine system, this masthead unit measures apparent wind direction and speed. This data is essential for sailboat navigation and performance optimization.

Is the R28171 masthead installation difficult?

The R28171 long masthead is a mechanical spare part. Its installation typically involves replacing the old masthead on the existing transducer. It is recommended to follow the specific instructions provided in your Raymarine system installation manual to ensure correct and secure installation.

What does the R28171 product package contain?

The R28171 product corresponds to the "long masthead unit only". The packaging contains only the upper mechanical part of the wind sensor, i.e. the vane and the anemometer cups. The electronic transducer, connection cable or other accessories are not included.