Sonde sondeur traversante ou à coller 50mm

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 8%

Raymarine

T905

Sondă sondeu transversală sau cu lipire 50 mm

Conçu pour intégrer les données de vos sondes de profondeur, vitesse et température, l'émetteur de coque Raymarine T905 (SKU T905) assure une connexion fiable au système de bord. Compatible avec une alimentation 12/24Vdc, il est destiné à une installation verticale dans un environnement ventilé, à l'abri de l'eau. Le kit inclut les vis auto-foreuses nécessaires à la fixation.

Prix publicBénéficier du tarif pro

801,25 RON

801,25 RON ~~875,43 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tehnologii de sondeu suportate	Sondeur analogique (profondeur, vitesse, température)
Tensiune de funcționare	12/24 Vdc
Tip conector sonar	Fils nus / Bornier à vis
Lățimea produsului	52.5 mm
Înălțimea produsului	90 mm
Adâncime produs	42.5 mm
Indice IP	Non applicable (doit être monté au-dessus de la ligne de flottaison)
Compatibilitate magistrală	Analogique
Conectivitate wireless	Non
Tip de montaj	Montage mural / Vertical
Senzor de viteză integrat	Non
Senzor de temperatură integrat	Non

Accessoires

Cablu 1.5m SeaTalk NG SPUR F / conector Devicenet NMEA 2000 M

235,27 RON

235,27 RON ~~259,39 RON~~

Cumpără

Cablu 1 metru SeaTalk NG F / DeviceNet (NMEA 2000) F)

294,01 RON

294,01 RON ~~324,23 RON~~

Cumpără

Câble Adaptateur Femelle Devicenetraymarine A06045

Cablu adaptor STNG magistrală femelă către DeviceNet femelă 400 mm

224,44 RON

224,44 RON ~~259,39 RON~~

Cumpără

Cablu SeaTalk NG / Devicenet NMEA2000 femelă (400mm)

264,58 RON

264,58 RON ~~291,81 RON~~

Cumpără

Cablu de ramificație SeaTalk NG 1 metru

224,71 RON

224,71 RON ~~259,39 RON~~

Cumpără

Conector în T SeaTalk NG

149,20 RON

149,20 RON ~~162,12 RON~~

Cumpără

Conector 5 căi SeaTalk NG

250,54 RON

250,54 RON ~~259,39 RON~~

Cumpără

Sondă de lipit cu fascicul conic HIGH CHIRP, unghi 0/12/20°, CPT-S, cablu 6 m

968,89 RON

968,89 RON ~~1.069,97 RON~~

Cumpără

Rallonge Raymarine A80273 4 m pour sondes CPT-S, CPT100, CPT110 et CPT120

Cablu prelungitor 4 m pentru sonde CPT-S, CPT100, CPT110 & CPT120

260,83 RON

260,83 RON ~~291,81 RON~~

Cumpără

Description détaillée

Conceput pentru sistemele de navigație marină, emițătorul de carenă Raymarine T905 gestionează transmiterea datelor provenite de la sondele de adâncime, viteză și temperatură. Acest modul este esențial pentru centralizarea informațiilor de la traductoarele cablate către instrumentele de bord, oferind o soluție de integrare pentru diverse configurații de senzori.

Instalare și conectivitate T905

Instalarea emițătorului T905 necesită montarea verticală la cel puțin 50 cm deasupra liniei de plutire, într-un spațiu bine ventilat și fără contact direct cu apa. Nu trebuie montat într-un compartiment etanș. Alimentarea se face de la o sursă de 12/24Vcc și poate fi alimentat și de la un panou solar Raymarine. Conectarea cablurilor traductoarelor se realizează conform unui cod de culori precis, cu instrucțiuni specifice pentru Triducers (masa trebuie conectată la conectorul de adâncime) și pentru senzorii de viteză fără senzor de temperatură (legătura între bornele maro și albă).

Integrarea datelor de la sonde

T905 permite consolidarea semnalelor de la sonde separate (adâncime, viteză, temperatură) într-un singur punct. Este necesară aplicarea de vaselină de silicon pe contacte pentru a asigura fiabilitatea conexiunilor. Capacul carcasei asigură menținerea și protecția mantalelor exterioare ale cablurilor. Acest tip de emițător este adesea utilizat în sisteme unde flexibilitatea integrării sondelor existente este prioritară față de utilizarea traductoarelor „tot-în-una” sau a sistemelor NMEA 2000 directe, așa cum se poate observa pe produse mai noi din gama Axiom de la Raymarine sau alte mărci precum Garmin sau B&G.

Documentations

Type	Nom
	EN - Gabarit de montage - Sonde sondeur traversante ou à coller 50mm
	EN - Notice d'installation - Sonde sondeur traversante ou à coller 50mm
	EN - Manuel d'utilisation - Sonde sondeur traversante ou à coller 50mm
	EN - Manuel d'utilisation - Sonde sondeur traversante ou à coller 50mm
	EN - Manuel d'utilisation - Sonde sondeur traversante ou à coller 50mm
	EN - Manuel d'utilisation - Sonde sondeur traversante ou à coller 50mm
	EN - Manuel d'utilisation - Sonde sondeur traversante ou à coller 50mm

Avis de l'expert

Pol CONIN

Responsabil digital

« Wired transducer integration via Raymarine T905 hull-mounted transducer »

The Raymarine T905 hull transmitter is a critical component for integrating existing or specific wired transducers into a boat’s instrumentation network. Its practical value lies in its ability to bridge conventional depth, speed, and temperature transducers with the display system, often within a wireless architecture (such as Raymarine’s Tacktick/Micronet systems). This is particularly relevant for sailboats where minimizing wiring and installation flexibility are key advantages.

For optimal installation, it is essential to follow mounting guidelines: vertically, at least 50 cm above the waterline, and in a ventilated environment, protected from direct water contact. This is not a submersible device nor intended for sealed compartments. The standard power supply is 12/24Vdc, with the option to use a Raymarine solar panel for isolated installations.

The T905 stands out due to its function as a converter and transmitter for wired transducers, offering an alternative to directly NMEA 2000-compatible or wireless transducers. It is ideal for those who wish to retain existing high-performance transducers or face cable routing constraints. It is critical to note the specific wiring requirements for Triducers and speed transducers without temperature sensors to ensure correct operation. This module is not a transducer itself but the core that interprets and transmits signals from your sensors.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Sondă sondeu transversală sau cu lipire 50 mm

801,25 RON

801,25 RON ~~875,43 RON~~

Complétez votre installation avec des

Équipements complémentaires

Raymarine

Afișaj i50 Depth sonor

Ref : E70059

2.780,57 RON

2.780,57 RON ~~3.209,90 RON~~

Raymarine

Indicator i50 Speed

Ref : E70058

2.985,99 RON

2.985,99 RON ~~3.209,90 RON~~

Raymarine

Indicator Digital i50 Tridata

Ref : E70060

3.065,36 RON

3.065,36 RON ~~3.534,13 RON~~

Raymarine

Afișaj multifuncțional Raymarine i70s

Ref : E70327

3.663,82 RON

3.663,82 RON ~~3.858,36 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What are the mounting requirements for the T905 transducer?

For correct installation, the T905 must be mounted vertically in a well-ventilated space and at least 50 cm above the waterline. It is crucial to avoid any direct contact with water.

At what height above the waterline should the T905 be mounted?

The T905 transducer must be installed at least 50 cm above the waterline to ensure proper operation and prevent direct contact with water.

Can the T905 be installed in a watertight compartment?

No, it is essential NOT to install the T905 in a watertight compartment. It must be mounted in a well-ventilated area.

In which orientation should the T905 transducer be mounted?

The T905 must be mounted vertically, with the cables exiting from the bottom of the unit. It is important to note that the mounting template must be inverted relative to the transducer itself.

How to mount the T905 on the boat?

To mount the T905, drill three 2.5 mm holes at the positions marked "B" on the mounting template. The transducer is then secured using the provided self-tapping screws. Do not overtighten the screws to avoid damaging the housing.

What is the procedure for connecting the transducer cables to the T905?

Connecting the transducers' cables to the T905 is done by following the color coding indicated on the unit. It is essential to sleeve the cable shields to prevent any short circuit. Once connected, apply silicone grease to the contacts.

Is there a specific guideline for wiring a Triducer with the T905?

Yes, for a Triducer, the ground braid (the shielding) must be connected to the depth connector and NOT to the speed connector.

How to connect a speed sensor without a temperature sensor to the T905?

If your speed transducer does not have an integrated temperature sensor, you must connect the brown and white wires of the speed connector with a jumper to ensure proper data transmission.

Should silicone grease be applied to the T905 contacts?

Yes, it is recommended to apply silicone grease to the terminal contacts after connecting the transducer cables. This helps ensure the reliability of the connections.

How to ensure cable protection after connecting to the T905?

After connecting the cables, it is important to support them near the transducer. Then ensure the housing cover is properly fitted, as it is designed to hold and protect the outer cable sleeves inside the transducer.

With which types of systems is the T905 designed to operate?

The T905 is designed to work with marine navigation systems that require the centralization of data from wired transducers (depth, speed, temperature) to onboard instrumentation. It is a solution for integrating existing sensors.

Is the T905 an alternative to direct NMEA 2000 systems?

Yes, the T905 is often used in setups where flexible integration of existing transducers is preferred over "all-in-one" transducers or direct NMEA 2000 systems. It provides a different method for sensor data integration.