Interface moteur et de contrôle Universelle ECI-100

Interface moteur et controle Raymarine ECI-100 E70227

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 13%

Raymarine

E70227

Interfață motor și control universală ECI-100

L'interface moteur universelle Raymarine ECI-100 (E70227) est une passerelle dédiée à l'intégration des données moteur J1939 et NMEA 2000 dans les réseaux SeaTalkng. Conçue pour centraliser les informations de propulsion sur les écrans multifonctions Raymarine, y compris les gammes LightHouse, C-Classic, A-Classic et E-Classic, elle assure une compatibilité étendue. Ce produit est une solution éprouvée pour les installations existantes comme pour les nouvelles, offrant une conversion fiable des données. Aucune information sur les accessoires inclus n'est spécifiée dans le contexte fourni.

Prix publicBénéficier du tarif pro

2.095,82 RON

2.095,82 RON ~~2.431,74 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Destinația produsului	Intégration des données moteur
Gama de produse	ECI
Compatibil NMEA 2000	Oui
Rețea cablată	NMEA 2000,J1939,SeaTalkng
Număr de intrări	1.0
Număr de ieșiri	1.0
Număr porturi USB	0.0
Număr porturi Ethernet	0.0
Tip de conector	DeviceNet
Metodă de alimentare	Câblé (12V CC)
Nume software configurare	LightHouse
Suport actualizare firmware	Oui
Tip de montaj	Montage en surface
Dimensiuni (L x H x P)	109.2 x 30.2 x 67.5 mm
Protocol de comunicare	NMEA 2000,J1939,SeaTalkng
Număr de porturi seriale	0.0
Intrare cablată	NMEA 2000,J1939
Ieșire cablată	SeaTalkng

Accessoires

Cablu 1.5m SeaTalk NG SPUR F / conector Devicenet NMEA 2000 M

235,27 RON

235,27 RON ~~259,39 RON~~

Cumpără

Cablu SeaTalk NG / Devicenet NMEA2000 femelă (400mm)

264,58 RON

264,58 RON ~~291,81 RON~~

Cumpără

Cablu 1 metru SeaTalk NG F / DeviceNet (NMEA 2000) F)

294,01 RON

294,01 RON ~~324,23 RON~~

Cumpără

Câble Adaptateur Femelle Devicenetraymarine A06045

Cablu adaptor STNG magistrală femelă către DeviceNet femelă 400 mm

224,44 RON

224,44 RON ~~259,39 RON~~

Cumpără

Cablu de ramificație SeaTalk NG 1 metru

224,71 RON

224,71 RON ~~259,39 RON~~

Cumpără

Conector în T SeaTalk NG

149,20 RON

149,20 RON ~~162,12 RON~~

Cumpără

Cablu dorsal SeaTalk NG Raymarine, lungime 1 metru

209,71 RON

209,71 RON ~~226,96 RON~~

Cumpără

Cablu magistrală SeaTalk NG 3 m

224,44 RON

224,44 RON ~~259,39 RON~~

Cumpără

Cablu dorsal SeaTalk NG 5 m

296,79 RON

296,79 RON ~~324,23 RON~~

Cumpără

Conector 5 căi SeaTalk NG

250,54 RON

250,54 RON ~~259,39 RON~~

Cumpără

Description détaillée

Interfața motor și control universală ECI-100 de la Raymarine, referință E70227, este proiectată pentru integrarea datelor motor în rețelele SeaTalkng. Asigură conversia informațiilor provenite de la magistralele motor NMEA 2000 și J1939, permițând afișarea acestora pe ecranele multifuncționale Raymarine compatibile.

Integrare și compatibilitate

Acest modul gateway permite centralizarea datelor de propulsie, indiferent de configurația mono-motor sau multi-motoare (peste două), cu magistrale CAN partajate sau separate. ECI-100 suportă protocoalele NMEA 2000 și J1939, acoperind astfel o gamă largă de motorizări. Este compatibil cu ecranele multifuncționale Raymarine echipate cu software-ul LightHouse versiunea 8 sau ulterioară, precum și cu MFD-urile din generațiile anterioare, cum ar fi seriile C-Classic (C70, C80, C120), A-Classic (A50, A50D, A57D, A70, A70D) și E-Classic (E80, E120).

Concepție și instalare

Cu dimensiunile de 109,2 mm lungime, 67,5 mm lățime și 30,2 mm înălțime, ECI-100 se integrează discret. Instalarea necesită o conexiune corectă la masă și protecție prin siguranță adecvată. Pentru sistemele multi-motoare, este disponibil un asistent de identificare a motoarelor prin intermediul MFD-urilor LightHouse pentru configurarea ordinii de afișare a datelor. Dispozitivul este conform cu directiva EMC 2004/108/CE, asigurând compatibilitate electromagnetică. Respectă normele de etanșeitate IPX, însă expunerea la curățătoare cu jet de înaltă presiune nu este acoperită de garanție.

Documentations

Type	Nom
	EN - Plan technique - Interface moteur et de contrôle Universelle ECI-100
	FR - Notice d'installation - Interface moteur et de contrôle Universelle ECI-100
	EN - Notice d'installation - Interface moteur et de contrôle Universelle ECI-100
	EN - Document technique - Interface moteur et de contrôle Universelle ECI-100
	EN - Document technique - Interface moteur et de contrôle Universelle ECI-100
	EN - Declaration de conformite - Interface moteur et de contrôle Universelle ECI-100

Avis de l'expert

Pol CONIN

Responsabil digital

« Raymarine ECI-100 engine integration: J1939 and NMEA 2000 gateway to SeaTalkng »

The Raymarine ECI-100 engine interface is a key component for sailors seeking centralized and accurate visualization of propulsion data on their Raymarine navigation system. Its primary role is to convert proprietary or standard engine protocols such as J1939 and NMEA 2000 into a format usable by the SeaTalkng network. This provides significant practical value for boats equipped with modern engines, which are often natively incompatible with multifunction displays without a dedicated gateway.

In terms of installation, the ECI-100 is designed to be mounted in a protected environment. The procedure for single-engine installations is straightforward, but for multi-engine setups, the engine identification assistant on LightHouse or Legacy MFDs is essential. It is critical to follow the engine-by-engine identification steps accurately to ensure correct and orderly data display (port, center, starboard). The need to have the engine running during this identification phase is a practical constraint to anticipate. While the device is water-resistant (IPX standard), it is advisable to install it away from high-pressure washdowns that could compromise its long-term waterproofing.

The ECI-100 stands out for its ability to standardize engine data from various sources into the Raymarine ecosystem, including older generations of multifunction displays. This extends the useful life of existing installations while providing functional upgrades. It is particularly suitable for recreational and workboats that benefit from comprehensive integration of onboard information, avoiding the need for multiple analog gauges or engine-specific displays. However, it is not intended for SOLAS or IMO applications and should be limited to recreational or light-duty boats.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Interfață motor și control universală ECI-100

2.095,82 RON

2.095,82 RON ~~2.431,74 RON~~

Complétez votre installation avec des

Équipements complémentaires

Raymarine

Afișaj multifuncțional Raymarine i70s

Ref : E70327

3.663,82 RON

3.663,82 RON ~~3.858,36 RON~~

Raymarine

AIS 700 CLASĂ B cu SPLITTER de antenă integrat

Ref : E70476

7.055,29 RON

7.055,29 RON ~~7.749,14 RON~~

Raymarine

Senzor calculator EV1 Evolution

Ref : E70096

5.304,11 RON

5.304,11 RON ~~5.998,29 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Raymarine ECI-100 interface and what is it used for?

The Raymarine ECI-100 (part number E70227) engine and control interface is a bridge module designed to integrate propulsion data from your engine into the Raymarine SeaTalkng network. It converts data from NMEA 2000 and J1939 engine buses, enabling display on compatible Raymarine multifunction displays. This centralizes engine data display, whether for single-engine or multi-engine setups.

Which engine types or engine bus protocols are compatible with the ECI-100 interface?

The ECI-100 interface is compatible with a wide range of propulsion systems. It supports the NMEA 2000 and J1939 engine bus protocols. It can be used for single-engine or multi-engine configurations (more than two), whether the CAN buses are shared or separate.

What are the physical dimensions of the ECI-100 interface?

The ECI-100 interface has compact dimensions, making discreet integration easier. Its dimensions are:

Length: 109.2 mm Width: 67.5 mm Height: 30.2 mm

What are the power supply and electrical protection requirements for installing the ECI-100?

For a correct and safe installation of the ECI-100, it is imperative to:

Verify that the device is properly connected to ground. Protect the power supply with a fuse of the appropriate rating or an automatic circuit breaker. Never connect this unit to a system with a positive ground. Always disconnect the vessel's power supply before installing or disconnecting the device.

What are the recommendations to avoid electromagnetic interference when installing the ECI-100?

For optimal EMC performance and to minimize interference, the ECI-100 and its cables should be:

At least 1 meter (3 feet) away from any device emitting or any cable carrying radio signals (e.g., VHF transceivers). For Single Sideband (SSB) radios, this distance must be increased to 2 meters (7 feet).

More than 2 meters (7 feet) away from a radar beam path.

Powered by a battery different from the one used for engine starting, to prevent erratic system behavior.

If non-Raymarine cables are used, it is mandatory to attach a ferrite choke to the cable near the Raymarine device.

How to configure the display order of data for multi-engine systems with the ECI-100?

For multi-engine systems, a motor identification assistant is available via Raymarine multifunction displays running LightHouse software (version 8 or later). This assistant allows you to configure the order in which engine data is displayed (e.g., port, port-center, center, starboard-center, starboard) so that it appears correctly on your MFD's engine data pages. For single-engine systems, this configuration is not required.

Does the ECI-100 warranty cover water damage if the device is cleaned with a high-pressure washer?

No. Although the ECI-100 interface meets the IPX waterproofing standard, damage caused by exposing the product to a high-pressure washer is not covered by the Raymarine warranty. It is recommended to avoid using pressure washers directly on the device.